82 cj7 build

nshefbuch · 03-13-2011, 08:53 PM

well i bought this jeep off of a CORE member may of 09 and thought i'd share what i've done and am going to do.

here are two from when i bought it

cancer in the floor

rocker panel cancer

nshefbuch · 03-13-2011, 08:57 PM

rear corner cancer

rear frame cancer

nshefbuch · 03-13-2011, 09:01 PM

this is a free hard top that was given to me. yes i said FREE!
the sunroof leaked very badly so i patched it up
also was given the doors with it too.

dash clock that didn't work, i replaced with a working fuel gauge and put in a new sending unit so i have a rare WORKING, gas gauge in a cj

nshefbuch · 03-13-2011, 09:09 PM

rebuilt amc 360 and had mild cam put in.
has a t18a, d300 combo also
new headers, and flowmaster 44's
optima yellow top
aluminum radiator
new clutch fan
overflow catch can
universal washer solution pump kit with tj nozels in the hood
new steering box

here are my two jeeps, i sold the cj5 last summer

local mud bog

learned a great leason on doing a mud bog without a top so put the top on for the next one

nshefbuch · 03-13-2011, 09:14 PM

axle swap i'm getting ready to start
i ordered parts from carwash to swap these in

3/4 ton d44 with 4.09 gears and welded already setup with high steer

14 bolt with 4.10 gears / open

h1 rims /tires

nshefbuch · 03-13-2011, 09:16 PM

all of the work is done by me except the motor work. i'll pay for that to be done
as you can see i've done all of this inside a one car garage. yea its cramped

03-13-2011, 08:53 PM	#1
nshefbuch Join Date: Jul 2008 Location: piqua, ohio Posts: 76	82 cj7 build well i bought this jeep off of a CORE member may of 09 and thought i'd share what i've done and am going to do. here are two from when i bought it cancer in the floor rocker panel cancer

03-13-2011, 08:57 PM	#2
nshefbuch Join Date: Jul 2008 Location: piqua, ohio Posts: 76	rear corner cancer rear frame cancer

03-13-2011, 09:01 PM	#3
nshefbuch Join Date: Jul 2008 Location: piqua, ohio Posts: 76	this is a free hard top that was given to me. yes i said FREE! the sunroof leaked very badly so i patched it up also was given the doors with it too. dash clock that didn't work, i replaced with a working fuel gauge and put in a new sending unit so i have a rare WORKING, gas gauge in a cj

03-13-2011, 09:09 PM	#4
nshefbuch Join Date: Jul 2008 Location: piqua, ohio Posts: 76	rebuilt amc 360 and had mild cam put in. has a t18a, d300 combo also new headers, and flowmaster 44's optima yellow top aluminum radiator new clutch fan overflow catch can universal washer solution pump kit with tj nozels in the hood new steering box here are my two jeeps, i sold the cj5 last summer local mud bog learned a great leason on doing a mud bog without a top so put the top on for the next one

03-13-2011, 09:14 PM	#5
nshefbuch Join Date: Jul 2008 Location: piqua, ohio Posts: 76	axle swap i'm getting ready to start i ordered parts from carwash to swap these in 3/4 ton d44 with 4.09 gears and welded already setup with high steer 14 bolt with 4.10 gears / open h1 rims /tires

03-13-2011, 09:16 PM	#6
nshefbuch Join Date: Jul 2008 Location: piqua, ohio Posts: 76	all of the work is done by me except the motor work. i'll pay for that to be done as you can see i've done all of this inside a one car garage. yea its cramped