Welder issues

67fastback · 06-08-2011, 07:58 AM

ok i got older welder 110v I weld sometimes and works great other times it goes and then just stops nothing... will not feed the wire at all i pull the wire out more and not hung up just not feed or getting a spark went i hit the steel... put it way for a few days bring back up and works again...
really strang, and one know what is going on here or what i should check out when this happens?

fmlewis · 06-08-2011, 09:53 AM

I got el cheapo Harbor Frieght welder. What I have found with mine is that you need to make sure the line leading to the gun isn't twisted or has tight bends in it, otherwise it feeds great.

Also, you wire size may not be the right diameter for the feed mechanism, but I would expect you to have problems all the time.

jfiscus · 06-08-2011, 10:07 AM

Pull the trigger with the cover open if it has a cover. See if the feed wheels are turning & in-turn feeding the wire through them. If the wire's feeding fine there then I would assume the liner needs replaced.

gothodgie · 06-08-2011, 12:40 PM

you might just be hitting it's duty cycle, and after it cools down it starts working again...

93 Krawler · 06-08-2011, 01:11 PM

Quote:

Originally Posted by gothodgie

you might just be hitting it's duty cycle, and after it cools down it starts working again...

Yeah, if it works and then stops, it's either the electronics are messed up or hitting the duty cycle. It depends on how long you are using it before it stops feeding.

oklahomawelder · 06-08-2011, 01:24 PM

Quote:

Originally Posted by gothodgie

you might just be hitting it's duty cycle, and after it cools down it starts working again...

THIS^^^^^ would be my bet.....

gothodgie · 06-08-2011, 03:24 PM

Quote:

Originally Posted by oklahomawelder

THIS^^^^^ would be my bet.....

yea those little welders don't have much of a duty cycle if i remember right.. It should tell ya about it in the manual if you still have it laying around...

06-08-2011, 07:58 AM	#1
67fastback Splattt- you want some Join Date: Mar 2007 Location: Mason,Oh Posts: 692	Welder issues ok i got older welder 110v I weld sometimes and works great other times it goes and then just stops nothing... will not feed the wire at all i pull the wire out more and not hung up just not feed or getting a spark went i hit the steel... put it way for a few days bring back up and works again... really strang, and one know what is going on here or what i should check out when this happens? __________________ Thanks, 67fastback ------------- 84 Honda cr60r - for sale 87 Honda 200sx - for sale 67 Mustang fastback - under restoration MCA #63430 04 Silverado 2500 crew cab 87 sami - "SPLAT" 87 sami tin top - "Blue Fire" 88 sami - "Squirt" My New Video Channel -http://www.youtube.com/PhillbillyProduction My Video Channel - http://www.youtube.com/justworkn

06-08-2011, 12:40 PM	#4
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	you might just be hitting it's duty cycle, and after it cools down it starts working again... __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

06-08-2011, 09:53 AM	#2
fmlewis The best damn Engineer!!! Join Date: Aug 2008 Location: Fairfield Posts: 135	I got el cheapo Harbor Frieght welder. What I have found with mine is that you need to make sure the line leading to the gun isn't twisted or has tight bends in it, otherwise it feeds great. Also, you wire size may not be the right diameter for the feed mechanism, but I would expect you to have problems all the time.

06-08-2011, 10:07 AM	#3
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	Pull the trigger with the cover open if it has a cover. See if the feed wheels are turning & in-turn feeding the wire through them. If the wire's feeding fine there then I would assume the liner needs replaced.