Grinding centers on rims.

itbrokeagain · 01-26-2012, 05:07 PM

I just picked up a set of yota rims. They don't fit over the hubs. There is about a quarter inch of metal on the inside of the hub that looks like it can come off. Can I do it with a grinder. I will do it the best I can.but if it isn't exactly perfect all around will I notice on the road?

Mistakes courtesy of Tapatalk

itbrokeagain · 01-26-2012, 05:09 PM

Mistakes courtesy of Tapatalk

Flxratd · 01-26-2012, 07:22 PM

long answer yes..... or maybe not if your using the tires that are on them and they are allready balanced but the hub needs to be centered for a tire balance machine to work properly. so if balance wont be an issue or just an offroad wheel no problem but otherwise you will have issues later on.

67fastback · 01-27-2012, 03:57 AM

try a 4 1/8" hole saw bit and see if you can get the it cut out.. I got some hummer rims that need them cut out also.. I did fit that if you use 3" spacers you dont need to cut the centers they will stick out far enough not to hit the bolts from the lockouts.

itbrokeagain · 01-27-2012, 05:19 PM

I will try that.

Mistakes courtesy of Tapatalk

gothodgie · 01-27-2012, 10:55 PM

Quote:

Originally Posted by 67fastback

try a 4 1/8" hole saw bit and see if you can get the it cut out.. I got some hummer rims that need them cut out also.. I did fit that if you use 3" spacers you dont need to cut the centers they will stick out far enough not to hit the bolts from the lockouts.

Quote:

Originally Posted by itbrokeagain

I will try that.

Mistakes courtesy of Tapatalk

If you can sandwich the center of the rim between 2 pieces of plywood and be able to find the center of the hole, then drill the hole saw thru the plywood and it will make it a nice smooth cut... But from experience i used 1 hole saw per wheel... Slow and good lube will help a lot too

, but find something that will not catch on fire to easy... I used the good milwaukee hole saws...

hth...

underpowered · 01-27-2012, 11:14 PM

i have cut out a set with a plasma cutter at work before and was able to obtain an even smooth cut.

67fastback · 01-28-2012, 05:39 AM

Quote:

Originally Posted by underpowered

i have cut out a set with a plasma cutter at work before and was able to obtain an even smooth cut.

ha ha key words here at work...
this is a hillybilly wheelin adventure hence the reason we are cuttin them out in the first place trying to stay low budget...we dont have a plasma cutter...

but all good...

itbrokeagain · 01-28-2012, 04:17 PM

Hillbilly wheeling adventure. I think that fits

Mistakes courtesy of Tapatalk

D_Rock · 01-29-2012, 10:40 AM

i did this once, had a nice set of ford f150 4x4 wheels i wanted to use on my tracker... i actually set a holesaw set. I took measurement of f150 rim center hole and used the same size holesaw bit for the pilot and then measured the hub on the tracker and used that size bit to cut. so my pilot was the bit the size of original hole, took about a day to measure, buy correct size holesaw bits and drill but they looked like the were factory when finished.

01-26-2012, 05:07 PM	#1
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Grinding centers on rims. I just picked up a set of yota rims. They don't fit over the hubs. There is about a quarter inch of metal on the inside of the hub that looks like it can come off. Can I do it with a grinder. I will do it the best I can.but if it isn't exactly perfect all around will I notice on the road? Mistakes courtesy of Tapatalk __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-26-2012, 05:09 PM	#2
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Mistakes courtesy of Tapatalk __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-26-2012, 07:22 PM	#3
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	long answer yes..... or maybe not if your using the tires that are on them and they are allready balanced but the hub needs to be centered for a tire balance machine to work properly. so if balance wont be an issue or just an offroad wheel no problem but otherwise you will have issues later on. __________________ One of these days Zuk 2.0

01-27-2012, 03:57 AM	#4
67fastback Splattt- you want some Join Date: Mar 2007 Location: Mason,Oh Posts: 692	try a 4 1/8" hole saw bit and see if you can get the it cut out.. I got some hummer rims that need them cut out also.. I did fit that if you use 3" spacers you dont need to cut the centers they will stick out far enough not to hit the bolts from the lockouts. __________________ Thanks, 67fastback ------------- 84 Honda cr60r - for sale 87 Honda 200sx - for sale 67 Mustang fastback - under restoration MCA #63430 04 Silverado 2500 crew cab 87 sami - "SPLAT" 87 sami tin top - "Blue Fire" 88 sami - "Squirt" My New Video Channel -http://www.youtube.com/PhillbillyProduction My Video Channel - http://www.youtube.com/justworkn

01-27-2012, 05:19 PM	#5
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	I will try that. Mistakes courtesy of Tapatalk __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-27-2012, 11:14 PM	#7
underpowered They call me......Scuba Join Date: Sep 2010 Location: Burlington, KY Posts: 292	i have cut out a set with a plasma cutter at work before and was able to obtain an even smooth cut. __________________ beat up rusted out k5

01-28-2012, 04:17 PM	#9
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Hillbilly wheeling adventure. I think that fits Mistakes courtesy of Tapatalk __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-29-2012, 10:40 AM	#10
D_Rock Join Date: Jan 2010 Location: Hamilton, Ohio Posts: 60 Images: 2	i did this once, had a nice set of ford f150 4x4 wheels i wanted to use on my tracker... i actually set a holesaw set. I took measurement of f150 rim center hole and used the same size holesaw bit for the pilot and then measured the hub on the tracker and used that size bit to cut. so my pilot was the bit the size of original hole, took about a day to measure, buy correct size holesaw bits and drill but they looked like the were factory when finished. __________________