|
04-26-2012, 02:36 PM | #1 |
Join Date: Feb 2007
Posts: 97
|
39.5 Iroc radials
Anybody ever run these? I can get a set for a great price. Just looking for opinions on the iroc's in general.
thanks |
04-26-2012, 02:52 PM | #2 |
Join Date: Jun 2009
Location: Goshen
Posts: 336
|
What are they going on?
From what I have heard they are great with a lot of tread and they are ok once they are worn down a little. I've wheeled with guys that run them and they seemed to work well.
__________________
BYAAH!!! |
04-26-2012, 03:02 PM | #3 |
Join Date: Feb 2007
Posts: 97
|
They are going on a jeep with one tons. It is used for off-road only.
|
04-26-2012, 03:05 PM | #4 |
Join Date: Mar 2007
Location: Xenia, OH
Posts: 281
|
They aren't the best tire for this area. I ran them on my old YJ and they don't do well in mud, etc. That said, if they're cheap, I'd go for it. They're not so bad that I would pass up a good deal on them.
|
04-26-2012, 03:22 PM | #6 |
Join Date: Feb 2007
Posts: 97
|
|
04-26-2012, 10:22 PM | #7 |
wheeler
Join Date: Jun 2008
Location: owingsville ky
Posts: 25
|
Never had radials but run the bias for close to three years I won't buy another set. Unless I got a killer deal yours don't sound bad if they r a decent size tire. IMO they look wore out when u get them and wear quick. Also the side walls r thin I run bead locks and can't go less than 10# of air pressure. But they go pretty good never had goin issues just flat tire from blowin inner bead
__________________
Casey built cj7, amc 360 fuel injected, 39.5 Irocs,14 bolt+60 detroits, 4 linked front and rear, 203/205 doubler etc........... |
|
|