race lawn mower

scarface · 03-10-2008, 02:15 PM

So some of my friends were bored and one just happens to be IMO a redneck. We came up with the idea to have a challenge with the 3 of us to build riding lawn mowers and race(yes we were drinking but we were sober enough). There will be 3 races, up hill, down hill, and an auto X type thing. we will race once in about a month with them stock and again this summer after we have "built" them.

I don't know the first thing about a lawn mower but I know I can build anything that moves and somethings that dont. Has anyone ever "built" a lawn mower and would anyone have one they would want to donate or sell for a cheap price. I'm trying to find one with an engine that I can still get parts for.

Also if anyone else is bored your welcome to come race too, I have to much time on my hands

94Dodge Truggy · 03-10-2008, 02:21 PM

Can I get involved? I have a 14 hp mower that is slightly modified and would love to be involved in such a prestigeous event! I can mill your head and do some motor work for ya. Let me know who is involved and if I can play with you guys. Sounds like fun!

Stang849 · 03-10-2008, 02:23 PM

Boy that took longer than I expected for Truggy to get involved!!!!

scarface · 03-10-2008, 02:30 PM

Scott your welcome to join. I dont plan to keep the stock motor, I just want one that I can make run decent for now. We are not sure what the "modified" race will consit of yet. It will probably be an open class and I know where I can get my hands on an R1 engine/trans for a good price. Originaly I wanted to be able to use this tractor at my house but they way its looking it wont be practical at all.

there are talks of making it so only "mower" engines can be used. If thats the case I'm going to see how much Nitrous it can handle.

tjjeepjeep · 03-10-2008, 02:42 PM

Keep us posted...I'd show up to watch..

94Dodge Truggy · 03-10-2008, 03:11 PM

R1 motor? How much? I have a place where we can race em, hill climb em and tractor pull if that is needed and I would think that it would be fun to stick with the current motor modified. Not worth the effort of extensive mods as the chassis are not even able to handle excessive speeds. How about making them dual purpose? Tractor pulling, hill climbing and race all in 1? These things can rattle your spine at 40mph!

94Dodge Truggy · 03-10-2008, 03:12 PM

Quote:

Originally Posted by tjjeepjeep

Keep us posted...I'd show up to watch..

No girls allowed!

scarface · 03-10-2008, 03:20 PM

I like the idea with the pull, I think that would make a great challenge and make it so you have to keep some low end. R1s go for around 1300-1500 usually but I have found a few for about 1k, not sure if I would want to spend that money on a lawn mower or not but I figured I would just put it on a go kart when I'm done with it.

I'm not sure if I will be able to convince them to stick with the original motor, they are pretty excited to weld up some tube and build a chassi to handle something larger. But that will be pretty scary/unsafe in the turns so I'll see. We are going to discuss it over a few beers when I get back in the state at the end of the week. I'll keep ya posted

carwash · 03-10-2008, 03:29 PM

be fun to film it, make it a big spoof, like a mockumentary.

Stang849 · 03-10-2008, 03:33 PM

Just to get your juices pumping guys!!

[yt]akaanteVCs4[/yt]

[yt]UYUGYcllHGI[/yt]

scarface · 03-10-2008, 06:25 PM

Quote:

Originally Posted by carwash

be fun to film it, make it a big spoof, like a mockumentary.

That sounds like a great idea, I'll have to steal me a camcorder and shoot it

muddinredneck513 · 03-10-2008, 06:46 PM

i like the road corse better and on the last one it looked like that hurt a lil bit

blazerbrad · 03-10-2008, 07:08 PM

One of the guys who used to work here competed in "professional" lawnmower racing...as in had sponsors, a regular season schedule, race suits, was on TV, etc... His wife still works in our office. I'm sure with a little searching you can find some actually racing leagues if you are interested in just seeing what their rules and stuff are. (and yes, I consider this hillbilly redneck no matter what, but looks like fun!).

Rubi06 · 03-11-2008, 12:47 AM

Nothing but redneck hillibilly stuff comes from you 3 when you start drinking. You'll have to let me know when you get started on this and i'll help you out.

scarface · 03-11-2008, 08:14 AM

Quote:

Originally Posted by lilbluexj

Nothing but redneck hillibilly stuff comes from you 3 when you start drinking. You'll have to let me know when you get started on this and i'll help you out.

Your the only one to blame that your Jeep looks red neck

maddhatter · 03-11-2008, 10:11 AM

http://cincinnati.craigslist.org/car/602163772.html

scarface · 03-11-2008, 12:53 PM

Yeah I saw that the other day, the down side is I was hoping I could cut my lawn with it

jfiscus · 03-11-2008, 01:08 PM

Get yer XJ done first!
Too many projects & you never get one "done".

scarface · 03-11-2008, 01:45 PM

I can't progress much more on the XJ without a welder. I found a 220 Hobart for a decent price so I'm going to try and pick that up from him.

jfiscus · 03-11-2008, 04:02 PM

Quote:

Originally Posted by scarface

I can't progress much more on the XJ without a welder. I found a 220 Hobart for a decent price so I'm going to try and pick that up from him.

You're always welcome to come up here & use my welder whenever but please bring your own sticks & cutting materials cause those get expensive.

Rubi06 · 03-11-2008, 04:54 PM

My jeep is no more redneck than yours. I think mine looks pretty good infact for the little I have done so far thank you. I second the getting somewhere on the jeep. The poor things been sitting there so neglected since Haspin. You've been talking about welders for months. It's time for you to just buy one.

scarface · 03-11-2008, 09:39 PM

Damn taxes just about killed me this year, found out my employer wasn't taking out for city and what not. Jason I will shoot you a PM about using your welder.

4RunnerAdam · 03-11-2008, 09:55 PM

I got an old Sears LT-10 rider with an 11hp tecumseh just itching to be pimped out. Has a chain drive rear end. I was thinking I could get some different sprockets and see how fast I could get it going. I have a plow for it too. Man, I wish I had it running on Saturday :mad:

her94yj · 04-08-2008, 05:58 PM

i did this for 3 seasons and believe it or not a stock HOG craftsman 14hp with the pullies flipped and the right pully change can run 36 mph on the country roads just watch for that death wobble it will leave a ton of road rash trust me!!!!!!!!!!!!! if you want some tips and easy how to tips hit me on yahoo @ stompnstang.. here are afew links too.. not sure if you knew it but the east coast natl. are in mansfield i think labor day weekend this year not sure have not looked....... ohh by the way the chain drive BAD idea if able to find a belt drive
http://letsmow.com/

http://sports.groups.yahoo.com/group/USLMRA/

fabricator · 04-08-2008, 09:28 PM

http://cincinnati.craigslist.org/grd/634366773.html

03-10-2008, 02:15 PM	#1
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	race lawn mower So some of my friends were bored and one just happens to be IMO a redneck. We came up with the idea to have a challenge with the 3 of us to build riding lawn mowers and race(yes we were drinking but we were sober enough). There will be 3 races, up hill, down hill, and an auto X type thing. we will race once in about a month with them stock and again this summer after we have "built" them. I don't know the first thing about a lawn mower but I know I can build anything that moves and somethings that dont. Has anyone ever "built" a lawn mower and would anyone have one they would want to donate or sell for a cheap price. I'm trying to find one with an engine that I can still get parts for. Also if anyone else is bored your welcome to come race too, I have to much time on my hands __________________ I believe this will be our finest hour

03-10-2008, 02:30 PM	#4
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	Scott your welcome to join. I dont plan to keep the stock motor, I just want one that I can make run decent for now. We are not sure what the "modified" race will consit of yet. It will probably be an open class and I know where I can get my hands on an R1 engine/trans for a good price. Originaly I wanted to be able to use this tractor at my house but they way its looking it wont be practical at all. there are talks of making it so only "mower" engines can be used. If thats the case I'm going to see how much Nitrous it can handle. __________________ I believe this will be our finest hour

03-10-2008, 03:20 PM	#8
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	I like the idea with the pull, I think that would make a great challenge and make it so you have to keep some low end. R1s go for around 1300-1500 usually but I have found a few for about 1k, not sure if I would want to spend that money on a lawn mower or not but I figured I would just put it on a go kart when I'm done with it. I'm not sure if I will be able to convince them to stick with the original motor, they are pretty excited to weld up some tube and build a chassi to handle something larger. But that will be pretty scary/unsafe in the turns so I'll see. We are going to discuss it over a few beers when I get back in the state at the end of the week. I'll keep ya posted __________________ I believe this will be our finest hour

03-10-2008, 03:29 PM	#9
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	be fun to film it, make it a big spoof, like a mockumentary. __________________

03-11-2008, 12:47 AM	#14
Rubi06 Join Date: Sep 2007 Location: Lebanon, Ohio Posts: 114 Images: 53	Nothing but redneck hillibilly stuff comes from you 3 when you start drinking. You'll have to let me know when you get started on this and i'll help you out. __________________ 2006 Chevy Tahoe Z71 2010 Harley Street Glide

03-10-2008, 02:21 PM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Can I get involved? I have a 14 hp mower that is slightly modified and would love to be involved in such a prestigeous event! I can mill your head and do some motor work for ya. Let me know who is involved and if I can play with you guys. Sounds like fun!

03-10-2008, 02:23 PM	#3
Stang849 Stinkin Bastige Join Date: Aug 2007 Location: Anderson Twp. Posts: 178 Images: 236	Boy that took longer than I expected for Truggy to get involved!!!!

03-10-2008, 02:42 PM	#5
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	Keep us posted...I'd show up to watch..

03-10-2008, 03:11 PM	#6
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	R1 motor? How much? I have a place where we can race em, hill climb em and tractor pull if that is needed and I would think that it would be fun to stick with the current motor modified. Not worth the effort of extensive mods as the chassis are not even able to handle excessive speeds. How about making them dual purpose? Tractor pulling, hill climbing and race all in 1? These things can rattle your spine at 40mph!

03-10-2008, 03:33 PM	#10
Stang849 Stinkin Bastige Join Date: Aug 2007 Location: Anderson Twp. Posts: 178 Images: 236	Just to get your juices pumping guys!! [yt]akaanteVCs4[/yt] [yt]UYUGYcllHGI[/yt]

03-10-2008, 06:46 PM	#12
muddinredneck513 Join Date: Jun 2007 Location: hamilton,oh Posts: 184	i like the road corse better and on the last one it looked like that hurt a lil bit

03-10-2008, 07:08 PM	#13
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	One of the guys who used to work here competed in "professional" lawnmower racing...as in had sponsors, a regular season schedule, race suits, was on TV, etc... His wife still works in our office. I'm sure with a little searching you can find some actually racing leagues if you are interested in just seeing what their rules and stuff are. (and yes, I consider this hillbilly redneck no matter what, but looks like fun!).

03-11-2008, 10:11 AM	#16
maddhatter Join Date: May 2007 Location: loveland OH Posts: 324	http://cincinnati.craigslist.org/car/602163772.html

03-11-2008, 12:53 PM	#17
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	Yeah I saw that the other day, the down side is I was hoping I could cut my lawn with it __________________ I believe this will be our finest hour

03-11-2008, 01:08 PM	#18
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	Get yer XJ done first! Too many projects & you never get one "done".

03-11-2008, 01:45 PM	#19
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	I can't progress much more on the XJ without a welder. I found a 220 Hobart for a decent price so I'm going to try and pick that up from him. __________________ I believe this will be our finest hour

03-11-2008, 04:54 PM	#21
Rubi06 Join Date: Sep 2007 Location: Lebanon, Ohio Posts: 114 Images: 53	My jeep is no more redneck than yours. I think mine looks pretty good infact for the little I have done so far thank you. I second the getting somewhere on the jeep. The poor things been sitting there so neglected since Haspin. You've been talking about welders for months. It's time for you to just buy one. __________________ 2006 Chevy Tahoe Z71 2010 Harley Street Glide

03-11-2008, 09:39 PM	#22
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	Damn taxes just about killed me this year, found out my employer wasn't taking out for city and what not. Jason I will shoot you a PM about using your welder. __________________ I believe this will be our finest hour

03-11-2008, 09:55 PM	#23
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	I got an old Sears LT-10 rider with an 11hp tecumseh just itching to be pimped out. Has a chain drive rear end. I was thinking I could get some different sprockets and see how fast I could get it going. I have a plow for it too. Man, I wish I had it running on Saturday :mad:

04-08-2008, 05:58 PM	#24
her94yj Join Date: Jun 2007 Location: nw ohio Posts: 109	its a BLAST i did this for 3 seasons and believe it or not a stock HOG craftsman 14hp with the pullies flipped and the right pully change can run 36 mph on the country roads just watch for that death wobble it will leave a ton of road rash trust me!!!!!!!!!!!!! if you want some tips and easy how to tips hit me on yahoo @ stompnstang.. here are afew links too.. not sure if you knew it but the east coast natl. are in mansfield i think labor day weekend this year not sure have not looked....... ohh by the way the chain drive BAD idea if able to find a belt drive http://letsmow.com/ http://sports.groups.yahoo.com/group/USLMRA/ __________________ 94 yj 4.0 HO header cold air stock drive line (for now ) Last edited by her94yj; 04-08-2008 at 05:59 PM. Reason: mis print

04-08-2008, 09:28 PM	#25
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	http://cincinnati.craigslist.org/grd/634366773.html __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode