Newb from KY

KillerKoatings · 01-24-2011, 12:09 PM

My name is Kenny and after a long absence from Jeep ownership I finally picked another one up. I bought a 08 JK mini van that should be getting the lift and 35's put on once Mike gets back from the KOH. Next its getting ARB's front and rear along with some 5.13's. Going to wheel it like that for a while and see what breaks first. Hopefully I'll get the chance to come out do some trail rides with you guys this year. BTW I also do a little powdercoating

yellowjacket · 01-24-2011, 02:51 PM

Sweet. What part of ky? And how big an object can u powdercoat?

94Dodge Truggy · 01-24-2011, 02:52 PM

Sounds good! Nice to meet ya! Give me more info on your company.

KillerKoatings · 01-24-2011, 09:01 PM

I'm just a small one guy operation working out of my house. My oven is 6ft tall by 40"x40". Wheels are not a problem and most axles except for big full width 60's. Here is link to my flickr acct with some pics of my work http://www.flickr.com/photos/1175674...7608214361467/

Here is also a pic of my Jeep as it sits. It won't look this way for long.

and one of my r/c rock crawler. My brother just got me into it this past summer so I'm not an expert on it yet. It is a Duratrax Cliff Climber and other than the axle housings and body nothing is stock.

and one last act of picture whoring. This is my 93 stang that will actually be for sale soon if anyone know someone looking for a nice stang.

hotrod · 01-24-2011, 09:29 PM

how much would you charge to do 16" dually wheels?

KillerKoatings · 01-24-2011, 10:27 PM

I assume all six? Also are they bare or coated, aluminum or steel and if steel are they rusty?

94Dodge Truggy · 01-24-2011, 11:22 PM

Pm me on what the 93 notch is going for.

KillerKoatings · 01-25-2011, 12:08 AM

Ill be listing for $12k. It has a 400hp 347/t-56 6spd. If you are interested ill send the full details

Drivermod · 01-25-2011, 11:09 AM

Finally got the Jeep eh?

The stang is a VERY nice car and his powdercoating skills are top notch.

KillerKoatings · 01-25-2011, 03:35 PM

Yeah I finally got the Jeep. Once I get the lift and tires on I'll have to go wheeling with you guys. Just give me a call when you guys go out next time. BTW thanks for the props on my work

hotrod · 01-25-2011, 05:39 PM

Quote:

Originally Posted by KillerKoatings

I assume all six? Also are they bare or coated, aluminum or steel and if steel are they rusty?

just the outter 4, they are aluminum and i could blast them first unless you guys can blast, i hate sand blasting haha :o

KillerKoatings · 01-25-2011, 10:21 PM

As long as there is not a ton of corrosian and doing a single coat of black it would be approx $50 per wheel. Of course I would want to see them before I put a firm price on them. Lmk if I can help

RuffedUpXJ · 01-26-2011, 08:21 AM

Post up some pictures and possibly some approx. prices on things over in the vendor area, so when this thread falls to the bottom it will still be close to the top over there.

KillerKoatings · 01-26-2011, 09:19 AM

Good idea! I'm boarding a plane to Miami right now so ill do that when I get back

Crucial · 02-01-2011, 02:04 AM

kenny, good to see you over here ... didnt know you picked up a jk , looks good ... funny how that color can only be pulled off on a jeep tho ...

btw looks like i'm free either sat. or sun. to swing by with that grab bar ..

KillerKoatings · 02-01-2011, 03:39 PM

Whichever day works best for you, lmk.

yellowjacket · 02-04-2011, 02:26 PM

Need some sbc valve covers blasted and powdercoated... Ill catch ya when u get back

KillerKoatings · 02-04-2011, 04:20 PM

No problem just shoot me a pm when you are ready and we will figure out a time to get together

01-24-2011, 12:09 PM	#1
KillerKoatings Join Date: Jan 2011 Posts: 119	Newb from KY My name is Kenny and after a long absence from Jeep ownership I finally picked another one up. I bought a 08 JK mini van that should be getting the lift and 35's put on once Mike gets back from the KOH. Next its getting ARB's front and rear along with some 5.13's. Going to wheel it like that for a while and see what breaks first. Hopefully I'll get the chance to come out do some trail rides with you guys this year. BTW I also do a little powdercoating

01-24-2011, 02:51 PM	#2
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	Sweet. What part of ky? And how big an object can u powdercoat? __________________ my next rig will be on the trail before zuk 2.0 will

01-24-2011, 02:52 PM	#3
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Sounds good! Nice to meet ya! Give me more info on your company. __________________

01-24-2011, 09:29 PM	#5
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	how much would you charge to do 16" dually wheels? __________________ 2013 RZR S

01-24-2011, 11:22 PM	#7
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Pm me on what the 93 notch is going for. __________________

01-24-2011, 09:01 PM	#4
KillerKoatings Join Date: Jan 2011 Posts: 119	I'm just a small one guy operation working out of my house. My oven is 6ft tall by 40"x40". Wheels are not a problem and most axles except for big full width 60's. Here is link to my flickr acct with some pics of my work http://www.flickr.com/photos/1175674...7608214361467/ Here is also a pic of my Jeep as it sits. It won't look this way for long. and one of my r/c rock crawler. My brother just got me into it this past summer so I'm not an expert on it yet. It is a Duratrax Cliff Climber and other than the axle housings and body nothing is stock. and one last act of picture whoring. This is my 93 stang that will actually be for sale soon if anyone know someone looking for a nice stang.

01-24-2011, 10:27 PM	#6
KillerKoatings Join Date: Jan 2011 Posts: 119	I assume all six? Also are they bare or coated, aluminum or steel and if steel are they rusty?

01-25-2011, 12:08 AM	#8
KillerKoatings Join Date: Jan 2011 Posts: 119	Ill be listing for $12k. It has a 400hp 347/t-56 6spd. If you are interested ill send the full details

01-25-2011, 11:09 AM	#9
Drivermod Join Date: May 2009 Location: Union, KY Posts: 225	Finally got the Jeep eh? The stang is a VERY nice car and his powdercoating skills are top notch. __________________ Ian 06 Toyota 4Runner

01-25-2011, 03:35 PM	#10
KillerKoatings Join Date: Jan 2011 Posts: 119	Yeah I finally got the Jeep. Once I get the lift and tires on I'll have to go wheeling with you guys. Just give me a call when you guys go out next time. BTW thanks for the props on my work

01-25-2011, 10:21 PM	#12
KillerKoatings Join Date: Jan 2011 Posts: 119	As long as there is not a ton of corrosian and doing a single coat of black it would be approx $50 per wheel. Of course I would want to see them before I put a firm price on them. Lmk if I can help

01-26-2011, 08:21 AM	#13
RuffedUpXJ On XJ 2 Now Join Date: Feb 2007 Location: Fairfield Twp. Posts: 314	Post up some pictures and possibly some approx. prices on things over in the vendor area, so when this thread falls to the bottom it will still be close to the top over there. __________________ 88 XJ - 5" lift - 35" BFG's - Bumpers - Rock Rails - Homebrewed OBA - Roof Rack - Tube Doors - Trimmed - Dented 87 XJ - D44 - Disco D30 - 235's - 231TC - Stock for now

01-26-2011, 09:19 AM	#14
KillerKoatings Join Date: Jan 2011 Posts: 119	Good idea! I'm boarding a plane to Miami right now so ill do that when I get back

02-01-2011, 02:04 AM	#15
Crucial Join Date: Jan 2007 Location: Covington Posts: 14	kenny, good to see you over here ... didnt know you picked up a jk , looks good ... funny how that color can only be pulled off on a jeep tho ... btw looks like i'm free either sat. or sun. to swing by with that grab bar .. __________________ <~Nick~> 2014 JKUR

02-01-2011, 03:39 PM	#16
KillerKoatings Join Date: Jan 2011 Posts: 119	Whichever day works best for you, lmk.

02-04-2011, 02:26 PM	#17
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	Need some sbc valve covers blasted and powdercoated... Ill catch ya when u get back __________________ my next rig will be on the trail before zuk 2.0 will

02-04-2011, 04:20 PM	#18
KillerKoatings Join Date: Jan 2011 Posts: 119	No problem just shoot me a pm when you are ready and we will figure out a time to get together

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode