Project Low and Lean Rustbucket ( LLR ) - Page 5

krawlin85toy · 06-27-2011, 02:56 PM

Quote:

Originally Posted by yellowjacket

Is ur boy stayin home? Maybe he can drive it while ur gone....

x2
hope he has a better time out with the family this year..just keep voice down!!

sarge · 06-27-2011, 03:40 PM

The boy is going with us

krawlin85toy · 06-27-2011, 11:50 PM

so how did the shake down on new motor go?

sarge · 06-28-2011, 12:30 PM

it went ok , I think the computer and the cam are having difficulty playing nice , but it seems to be learning the more I drive it .

94Dodge Truggy · 06-28-2011, 01:30 PM

Quote:

Originally Posted by sarge

It's alive again , got her going last night .

ended up with an old 258 that came out of the CJ I'm parting out . I had to modify my H.O. head but it was a very easy swap. only had to fab up a few little things to make it all work together.
The computer is still in learn mode and the cam is giving it fits so it's not running the best , but as soon as I get off work I'm slapping the drive shafts in her so I can get it out on the street for some drive time.....
Leaving Thursday for Florida so I prolly will not make it to the woods before then.

I will be leaving friday for florida. Wheres at?

sarge · 06-28-2011, 02:48 PM

going to the folks in Port Orange/ Daytona . Just got tickets to the 400 night race

94Dodge Truggy · 06-28-2011, 09:02 PM

Quote:

Originally Posted by sarge

going to the folks in Port Orange/ Daytona . Just got tickets to the 400 night race

You are lucky!!! I get to take it from behind from mickey. :(

yellowjacket · 06-28-2011, 09:37 PM

Drop that yj off at my place... ill help it " learn" while ur gone... no charge!

carwash · 06-28-2011, 09:47 PM

Quote:

Originally Posted by yellowjacket

Drop that yj off at my place... ill help it " learn" while ur gone... no charge!

You gonna install some ball valves in it for him? You got any left?

sarge · 06-29-2011, 03:41 PM

Quote:

Originally Posted by 94Dodge Truggy

You are lucky!!! I get to take it from behind from mickey. :(

LOL , I might see you there , I think the wife is secretly setting up a Mickey encounter for us to !!!!! I'm really happy about it but I'll have bite my tounge.

As far as the Jeep goes , I had it a tooth off , figured it out after work yesterday and the took ot to the creek and ran the piss out of , took a bunch of pictures with my phone and then dropped it in the water somewhere :mad:
So now the jeep is filthy and I'm phoneless....

krawlin85toy · 07-01-2011, 12:09 AM

dam, and you just replaced that phone from the last mis

shap!!!

sarge · 09-07-2011, 12:27 PM

Well as luck would have it ( my luck anyway ) something in the transfer case in the Jimmy let go and made my mind up for me ...... it's gonna find a new home, but before it goes it's going to lose its axles.

Got the garage cleaned up and reorganized from the mass motor swapping that has been taking place over the last few months and got the YJ in and up on jack stands .....

Phase II will begin shortly ...... stay tuned

specs :
- front 60 SUA on 4" superlift YJ springs
- Rear 60 SOA on stock YJ's - possible stock Dakotas if I need to set the rear axle back for tire clearance.
- 37" tires on recenter H1's
- Hydro assist using 8" Surplus Center ram and tapped factory box
Plan is to stay as low as possibe , it's gonna be wide... 13" total over what it is right now . Headed to the lake this week-end for one last dock party and then it's starting time...

yellowjacket · 09-07-2011, 12:33 PM

You sure have had some dark clouds over ur build...

Its gonna get better now. I can sense it. I'm lookin forward to this phase of ur build. Keep them pics comin
Sent from my LS670 using Tapatalk

BadHabit · 09-07-2011, 12:43 PM

Should be a nice stance, low and wide.

94Dodge Truggy · 09-07-2011, 02:05 PM

Got the garage cleaned up and reorganized from the mass motor swapping that Headed to the lake this week-end for one last dock party and then it's starting time...[/QUOTE]

Last time at the lake? Say it isn't so! I hope to get out once more if it warms up.

sarge · 09-07-2011, 02:56 PM

Quote:

Originally Posted by 94Dodge Truggy

Got the garage cleaned up and reorganized from the mass motor swapping that Headed to the lake this week-end for one last dock party and then it's starting time...

Last time at the lake? Say it isn't so! I hope to get out once more if it warms up.

[/QUOTE]

We will get out a few more times, .
but not in my boat , in fact we are not even getting mine out of storage this weekend , just a few couples going , no need to get the whole fleet out, I'm winterizing it before I come home

Hope Springs Hauler · 09-07-2011, 03:56 PM

I've still got the top for you so you can winter wheel, too

sarge · 09-07-2011, 04:21 PM

Quote:

Originally Posted by Hope Springs Hauler

I've still got the top for you so you can winter wheel, too

I figured you would chime in soon

I still want it and will get with you soon I promise !!! I would have already had it If I had't had motor problems with the last one.....

Hope Springs Hauler · 09-07-2011, 05:05 PM

Quote:

Originally Posted by sarge

I figured you would chime in soon

I still want it and will get with you soon I promise !!! I would have already had it If I had't had motor problems with the last one.....

Heck, I've got to see how you're gonna make this work. Dovetail, taper top. A lot of work but it should be nice

sarge · 09-14-2011, 09:38 AM

it has begun ! I had a few hours of free time last night so I decided it was time to jump into phase II ,

rear is sitting on it's own weight , sprung over on stock YJ's , it's alittle bit taller then I was shooting for so I may have to do something different down the road. Gotta head down to Brighton Spring and get some U-bolts after work today and then it's on to the hard part ....... the front!

humpy · 09-14-2011, 09:46 AM

What did u do with Jimmy Sarge?? I may know a guy that be interested if your just gonna sell body and frame

sarge · 09-14-2011, 09:54 AM

Quote:

Originally Posted by humpy

What did u do with Jimmy Sarge?? I may know a guy that be interested if your just gonna sell body and frame

Still have it , gonna put the Jeep axles under it and sell it as a driver/ mall crawler. It is currently sitting on timbers along side the house making momma really, really happy

gothodgie · 09-14-2011, 11:24 AM

Dent Spring is still around... I just got some ubolts there last week... They are in the Bob Summeral building kinda behind Fergusion plumbing off mosteller, right by 275... might be closer to you...

sarge · 09-15-2011, 10:13 AM

Thanks Chris , But Brighton has a Fairfield shop on N. Gilmore really close and great guys to work with .

gothodgie · 09-15-2011, 10:33 AM

i did not know they had a shop in fairfield... good to know too...

06-28-2011, 09:37 PM	#108
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	Drop that yj off at my place... ill help it " learn" while ur gone... no charge! __________________ my next rig will be on the trail before zuk 2.0 will

07-01-2011, 12:09 AM	#111
krawlin85toy Join Date: May 2007 Location: Hamilton Posts: 265 Images: 76	dam, and you just replaced that phone from the last misshap!!!

09-07-2011, 12:33 PM	#113
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	You sure have had some dark clouds over ur build... Its gonna get better now. I can sense it. I'm lookin forward to this phase of ur build. Keep them pics comin Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

09-07-2011, 02:05 PM	#115
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Got the garage cleaned up and reorganized from the mass motor swapping that Headed to the lake this week-end for one last dock party and then it's starting time...[/QUOTE] Last time at the lake? Say it isn't so! I hope to get out once more if it warms up. __________________

09-07-2011, 03:56 PM	#117
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	I've still got the top for you so you can winter wheel, too __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

06-27-2011, 03:40 PM	#102
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	The boy is going with us

06-27-2011, 11:50 PM	#103
krawlin85toy Join Date: May 2007 Location: Hamilton Posts: 265 Images: 76	so how did the shake down on new motor go?

06-28-2011, 12:30 PM	#104
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	it went ok , I think the computer and the cam are having difficulty playing nice , but it seems to be learning the more I drive it .

06-28-2011, 02:48 PM	#106
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	going to the folks in Port Orange/ Daytona . Just got tickets to the 400 night race

09-07-2011, 12:27 PM	#112
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Well as luck would have it ( my luck anyway ) something in the transfer case in the Jimmy let go and made my mind up for me ...... it's gonna find a new home, but before it goes it's going to lose its axles. Got the garage cleaned up and reorganized from the mass motor swapping that has been taking place over the last few months and got the YJ in and up on jack stands ..... Phase II will begin shortly ...... stay tuned specs : - front 60 SUA on 4" superlift YJ springs - Rear 60 SOA on stock YJ's - possible stock Dakotas if I need to set the rear axle back for tire clearance. - 37" tires on recenter H1's - Hydro assist using 8" Surplus Center ram and tapped factory box Plan is to stay as low as possibe , it's gonna be wide... 13" total over what it is right now . Headed to the lake this week-end for one last dock party and then it's starting time...

09-07-2011, 12:43 PM	#114
BadHabit Join Date: Sep 2011 Posts: 40	Should be a nice stance, low and wide.

09-14-2011, 09:38 AM	#120
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	it has begun ! I had a few hours of free time last night so I decided it was time to jump into phase II , rear is sitting on it's own weight , sprung over on stock YJ's , it's alittle bit taller then I was shooting for so I may have to do something different down the road. Gotta head down to Brighton Spring and get some U-bolts after work today and then it's on to the hard part ....... the front!

09-14-2011, 09:46 AM	#121
humpy Join Date: Sep 2008 Posts: 573	What did u do with Jimmy Sarge?? I may know a guy that be interested if your just gonna sell body and frame __________________ S10 with a few air shocks..

09-14-2011, 11:24 AM	#123
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	Dent Spring is still around... I just got some ubolts there last week... They are in the Bob Summeral building kinda behind Fergusion plumbing off mosteller, right by 275... might be closer to you... __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

09-15-2011, 10:13 AM	#124
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Thanks Chris , But Brighton has a Fairfield shop on N. Gilmore really close and great guys to work with .

09-15-2011, 10:33 AM	#125
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	i did not know they had a shop in fairfield... good to know too... __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode