1999 4.0 xj engine into a 2001

buckeyezuk · 07-04-2011, 08:05 PM

can a 1999 xj engine with a distributer be converted to a 2001 jeep xj without a distributer? what would you do with the hole for the distributer? can the crank sensor be bolted onto the 1999 engine? what else would be involved? blocks much different? thanks for any info!

Redriverranger · 07-05-2011, 09:39 PM

Blocks are different where the bosses for the alternator bolts on. The water pumps are different, pointing in a different direction, the air conditioner is located in a different spot. I think the block is the same where the cam position sensor bolts in in place of the distributor. 2000 up are the same. Some say 99 Grands are the same as the rest 2000 up.

07-04-2011, 08:05 PM	#1
buckeyezuk wheeler Join Date: Feb 2008 Location: bethel Posts: 134	1999 4.0 xj engine into a 2001 can a 1999 xj engine with a distributer be converted to a 2001 jeep xj without a distributer? what would you do with the hole for the distributer? can the crank sensor be bolted onto the 1999 engine? what else would be involved? blocks much different? thanks for any info! __________________ ZUKI linked f/r 16v air shocks cut 39.5" tsl. exod. full hydro F/R. rear steer.

07-05-2011, 09:39 PM	#2
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	Blocks are different where the bosses for the alternator bolts on. The water pumps are different, pointing in a different direction, the air conditioner is located in a different spot. I think the block is the same where the cam position sensor bolts in in place of the distributor. 2000 up are the same. Some say 99 Grands are the same as the rest 2000 up. __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode