I am too BIG!!!

biggin69 · 12-04-2011, 12:29 PM

Been working on the Sammy pretty hard here lately. Got ready to mount some seats and found out that I am too freaking big for the cage!

It is not wide enough for my shoulders. Should I cut the hole thing off and re-do it or sell the thing?

Who does cage work?

Dan

yellowjacket · 12-04-2011, 12:33 PM

like to see some pics. but yeah, u are corect- the cage goes between u and the rock, not the other way around

Sent from my LS670 using Tapatalk

chrisc · 12-04-2011, 01:08 PM

Can you lower the seats any and move them to the center?

biggin69 · 12-04-2011, 03:25 PM

Quote:

Originally Posted by chrisc

Can you lower the seats any and move them to the center?

I guess I really to buy some seats and then figure it out. The seats in the pics are not going to work...

chrisc · 12-04-2011, 04:39 PM

How wide from door bar to door bar? I think a samurai is only 47"-48" from door panel to door panel.

Nuts · 12-04-2011, 05:47 PM

Looks like even if you move the seats in and down you're going to be bouncing your head off some tubes.

biggin69 · 12-04-2011, 05:59 PM

Quote:

Originally Posted by chrisc

How wide from door bar to door bar? I think a samurai is only 47"-48" from door panel to door panel.

48" ... I am a little larger than normal!

biggin69 · 12-04-2011, 06:00 PM

I guess I am just going to have to cut it all off and start over. I have really lost about all my motivation on this thing! :mad:

Who can build a cage here?

chrisc · 12-04-2011, 06:16 PM

Man I'm 6'2" 245-270lbs. I have wheeled nothing but samurais. I can build you a new chassis or make the necessary changes to what you got. Give me a call.
Chris 513 465-4921

biggin69 · 12-04-2011, 06:26 PM

Quote:

Originally Posted by chrisc

Man I'm 6'2" 245-270lbs. I have wheeled nothing but samurais. I can build you a new chassis or make the necessary changes to what you got. Give me a call.
Chris 513 465-4921

I am about the same size....closer to 300

I tried calling you...sent you a pm also...

chrisc · 12-04-2011, 09:18 PM

PM returned

12-04-2011, 12:29 PM	#1
biggin69 Really??? Join Date: Sep 2009 Location: Cincy Posts: 678	I am too BIG!!! Been working on the Sammy pretty hard here lately. Got ready to mount some seats and found out that I am too freaking big for the cage! It is not wide enough for my shoulders. Should I cut the hole thing off and re-do it or sell the thing? Who does cage work? Dan Attached Thumbnails

12-04-2011, 12:33 PM	#2
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	like to see some pics. but yeah, u are corect- the cage goes between u and the rock, not the other way around Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-04-2011, 01:08 PM	#3
chrisc Join Date: Jan 2009 Location: Franklin OH Posts: 23	Can you lower the seats any and move them to the center?

12-04-2011, 04:39 PM	#5
chrisc Join Date: Jan 2009 Location: Franklin OH Posts: 23	How wide from door bar to door bar? I think a samurai is only 47"-48" from door panel to door panel.

12-04-2011, 05:47 PM	#6
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	Looks like even if you move the seats in and down you're going to be bouncing your head off some tubes.

12-04-2011, 06:00 PM	#8
biggin69 Really??? Join Date: Sep 2009 Location: Cincy Posts: 678	I guess I am just going to have to cut it all off and start over. I have really lost about all my motivation on this thing! :mad: Who can build a cage here?

12-04-2011, 06:16 PM	#9
chrisc Join Date: Jan 2009 Location: Franklin OH Posts: 23	Man I'm 6'2" 245-270lbs. I have wheeled nothing but samurais. I can build you a new chassis or make the necessary changes to what you got. Give me a call. Chris 513 465-4921

12-04-2011, 09:18 PM	#11
chrisc Join Date: Jan 2009 Location: Franklin OH Posts: 23	PM returned