Go Back   C.O.R.E. FORUM > Classifieds > For Sale - Offroad Related

Reply
 
Thread Tools Display Modes
Old 04-15-2012, 11:08 AM   #1
78Buford
 
78Buford's Avatar
 
Join Date: Feb 2008
Posts: 50
1979 Ford F250 Dana 60 front & rear, NP435, NP205, 4.10 gears

1979 Ford F250 Dana 60 front & rear, NP435, NP205, 4.10 gears

This is a complete truck minus a bed. I bought it locally (well about 50 miles away) on 4-14-2012. The truck had been sitting in a guy’s barn for the past five years. It ran when parked.

If it doesn’t sell (whole) in a few days, I’m going to take the grille, steering parts, and a few interior bits, sell the axles for $999 or $1099, and scrap the rest.

The sum of the parts on this truck are worth more to most people than the entire truck as a whole, but I’d rather not part it out and I’m not big into scrapping. I’d prefer to sell it complete for $1199 vs. parting it out for more $$. I’ve had many of these trucks and can tell you what the realistic value for the parts are. These would be options for the buyer of this pile:

Option 1—Part it out.

$1000 Dana 60 front w/ 4.10 gears
$100 Dana 60 rear with 4.10 gears
$150 Steering box (these are hard to come by—only used for two years).
$50 Steering shaft from column to box—again, only used two years .
$200 NP435 w/ big block bell housing & shifter
$100 NP205 T-case w/ all adapters & shifter
$100 (4) matching crappy 33” tires on 16.5 wheels
$300 400 cubic inch engine
$100 Complete grille shell and grille that’s in good shape
$75 Plastic side fuel tank with sender—it won’t rust. ;)
$50 Headliner
$75 Interior door panels
$75 Good windshield—all glass is good.
$100 Scrap the rest

Option 2—Remove the axles for the rig you are building & scrap the rest for $400-ish.

Option 3—Get it running, weld the rear, throw a cheap locker in the front, add 38” tires & have a beefy wheeler for cheap—this is what I did in 2003 with Buford—and it’s still kicking eight years later.

Pictures: All pictures were taken on 4-13-2012.

Trades: I doubt it, but feel free to ask.

Price: $1099 to $1299 depending on what you want.
$1299 for everything.
$1199 for everything minus the grille assembly
$1099 for everything minus the grille, steering box & shaft & door panels.

Location: Philo, OH 43771

Delivery: $2.50 per loaded mile from my zip code to yours.





















__________________
Large: 1978 Ford F-250
469 V-8 on Propane
C6, NP-205, 4.10's, 42" TSL's on 15x8's
D60: Detroit, 35 spline Alloy Shafts w/ Longfield Superjoints,
Dedenbear Knuckles, Drive Flanges.
1410 Driveshafts, D70-U Welded, 12K Winch,
A-6 OBA, Rapid Weight Loss, Personality
www.ohio4x4.com

Medium: 2009 Yamaha Grizzly 700
Fuel Injection, Power Steering, Diff-Lock, 27" Tires, 5K Winch

Small: 1993 Suzuki DR350 S
78Buford is offline   Reply With Quote
Old 04-17-2012, 11:10 AM   #2
78Buford
 
78Buford's Avatar
 
Join Date: Feb 2008
Posts: 50
Sale pending to Ron S. of South Charleston, OH. To be picked up/paid for on Sunday 4-20-2012.
__________________
Large: 1978 Ford F-250
469 V-8 on Propane
C6, NP-205, 4.10's, 42" TSL's on 15x8's
D60: Detroit, 35 spline Alloy Shafts w/ Longfield Superjoints,
Dedenbear Knuckles, Drive Flanges.
1410 Driveshafts, D70-U Welded, 12K Winch,
A-6 OBA, Rapid Weight Loss, Personality
www.ohio4x4.com

Medium: 2009 Yamaha Grizzly 700
Fuel Injection, Power Steering, Diff-Lock, 27" Tires, 5K Winch

Small: 1993 Suzuki DR350 S
78Buford is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.