The Southern Shine Crawl 2012 - Black Mountain

[94Dodge Truggy]

New "TIMMAE" buggy looks good Tim and Kevin! Poor ole bronco!

[93 Krawler]

Originally Posted by 94Dodge Truggy

New "TIMMAE" buggy looks good Tim and Kevin! Poor ole bronco!

And where were you at? Thought you were going. It's always a real bang when you go.

[beer_goggles_009]

nice Vids Chris thanks for posting them... Just a note they are labeled incorrectly. that is Upper rock Garden, not Middle.


I'm always amazed how tame everything looks in the vids. When I was sliding down the rock sideways knowing there was a drop there. It was a pucker moment, looks like nothing in video.

[gothodgie]

[QUOTE=beer_goggles_009;65148]nice Vids Chris thanks for posting them... Just a note they are labeled incorrectly. that is Upper rock Garden, not Middle.
QUOTE]

thanks... fixed...

[67fastback]

ok I finally got all the vids upload and renamed.. over 100 vids...

http://www.youtube.com/playlist?list=PL339BA123F1DB1FE6

that is the playlist for all the Southern Shine Crawl 2012

you can also find them if you search using that in the search engine on youtube...

dont forget to subscribe also.. thanks for viewing...

[67fastback]

found some other vids.

[gothodgie]

I was under the Toyota the other night and found some more crap...

Nick(Coppertop) I guess that rock in the lower Rock Garden got me a little more than we thought it did... Tcase hit the floor board and shifted everything about 1/2" to the drivers side when it broke my make shift solid trans mount... My welds don't look like they held up to well either ... So far i don't see anything else, but time will tell...

[Coppertop]

Hodgie,when I arrived on the scene,that rock already had you hung up.You must have dropped down on it pretty hard to cause all the carnage.

Time for a skid plate.
Nick

[yellowjacket]

u need a patented hydro skid...the cutting edge technology that cushions while it simultaneously stores extra transmission fluid:)

them rocks bite hard!

Sent from my LS670 using Tapatalk 2

[67fastback]

Hodgie I feel for you I found some stuff too..
Well been working on the splattt today and got the starter swapped out and the chick at autozone looked at the starter I took in there and said you just took that off a running sami? yes... It was all rusted up and full of mudd... I just laughed at her and said it still works when you tap it a few times..lol... she tested it and nothing... then I asked her to test the new and when she put it in the machine she did not clamp it down so when it started up it spun in the box and she jump a mile high.. I just laughed again and said ok Ill take it...

while swapping out the start I looked up and noticed that the left side of the zor snatch and saw that the frame mount that it bolts to had almosted riped off the frame.. guess I need to make a new support now.. and i did ripe out the rear upper shock mount.. man more carnage than I thought from Harlan....
:mad:

[gothodgie]

Originally Posted by yellowjacket

u need a patented hydro skid...the cutting edge technology that cushions while it simultaneously stores extra transmission fluid:)

them rocks bite hard!

Sent from my LS670 using Tapatalk 2

Pics of the prototype so i can copy it ?

[gothodgie]

Originally Posted by Coppertop

Hodgie,when I arrived on the scene,that rock already had you hung up.You must have dropped down on it pretty hard to cause all the carnage.

Time for a skid plate.
Nick

Yea the more i think about i remember a good jaring when i abruptly came to a stop there... There a scratch on the tcase, that i couldn't get a good pic of that looked like where the contact was nade... That dent in the floor board is like a dipple the exact same shape as the top of the tcase... about an 1/8" deep...

[Drivermod]

Originally Posted by yellowjacket

u need a patented hydro skid...the cutting edge technology that cushions while it simultaneously stores extra transmission fluid:)

them rocks bite hard!

Sent from my LS670 using Tapatalk 2

Shhhhh! The patents not pending yet on that one. Moderators, please delete thread.







:p

[gothodgie]

Originally Posted by Drivermod

Shhhhh! The patents not pending yet on that one. Moderators, please delete thread.







:p

lol...

[98tjls]

Late but some of our trip.