Go Back   C.O.R.E. FORUM > Campfire > General Discussions

Reply
 
Thread Tools Display Modes
Old 01-08-2014, 12:13 PM   #1
bootlegger
 
Join Date: Nov 2012
Posts: 59
4.0 Death

Engine went to 260 and blew a hose in my xj.Now she won't stay runnin. I'm assuming head gasket went.203k on the clock.Do I fix, replace or repower? Tight budget. I like little 4 cyl. diesels though......?
bootlegger is offline   Reply With Quote
Old 01-08-2014, 01:11 PM   #2
monkeystrong
SeƱor Monkey
 
monkeystrong's Avatar
 
Join Date: May 2012
Location: Georgetown, Ohio
Posts: 185
Depends.. if its the gasket, then replace and keep on truck'n. if its the head itself, then I would start looking for options.
monkeystrong is offline   Reply With Quote
Old 01-08-2014, 01:36 PM   #3
WrenchMonkey
Mechanical Animal
- CORE Member -
- Moderator -
 
WrenchMonkey's Avatar
 
Join Date: Feb 2008
Location: Beechmont
Posts: 1,883
Tight budgets and diesel conversions do not go together...

Fixing what you have is almost always cheaper. Even if you have to replace the whole engine, a bolt-in replacement is going to be faster, easier and cheaper.
__________________
DIRTY DEEDS, DONE DIRT CHEAP
Whatever doesn't kill you makes you stranger
WrenchMonkey is offline   Reply With Quote
Old 01-08-2014, 01:59 PM   #4
bootlegger
 
Join Date: Nov 2012
Posts: 59
I guess I'll get the head off and go from there.I'm just thinking it's probably cracked.
BTW i was just reading that there's a 4.0 poweresd vehicle in the current Dakar rally.
bootlegger is offline   Reply With Quote
Old 01-08-2014, 03:54 PM   #5
humpy
 
Join Date: Sep 2008
Posts: 573
Put a tstat and new hose on and try it first... It's likely not runnin because of lack of coolant I noticed both if our 4.0 engines don't run right without coolant system sealed up and coolant in them ..., or u may have frozen it and junked it ... Is that possible?
__________________
S10 with a few air shocks..
humpy is offline   Reply With Quote
Old 01-08-2014, 04:15 PM   #6
bootlegger
 
Join Date: Nov 2012
Posts: 59
Something is freezing up.The crank pulley is smoking the belt.Accys are barely turning. I'm thinking water pump or power steering.
bootlegger is offline   Reply With Quote
Old 01-08-2014, 05:12 PM   #7
WrenchMonkey
Mechanical Animal
- CORE Member -
- Moderator -
 
WrenchMonkey's Avatar
 
Join Date: Feb 2008
Location: Beechmont
Posts: 1,883
Quote:
Originally Posted by bootlegger View Post
Something is freezing up.The crank pulley is smoking the belt.Accys are barely turning. I'm thinking water pump or power steering.
Oh, well if it's just an accessory, you're definitely better off fixing. Pull the serp belt, and see what won't turn by hand. Easy.

Unless you were looking for an excuse to bump up to a V8. I don't mean to discourage that!
__________________
DIRTY DEEDS, DONE DIRT CHEAP
Whatever doesn't kill you makes you stranger
WrenchMonkey is offline   Reply With Quote
Old 01-08-2014, 06:10 PM   #8
GPER
 
GPER's Avatar
 
Join Date: Feb 2007
Location: Kettering, Ohio
Posts: 811
Quote:
Originally Posted by bootlegger View Post
I guess I'll get the head off and go from there.I'm just thinking it's probably cracked.
BTW i was just reading that there's a 4.0 poweresd vehicle in the current Dakar rally.
There are two Jeeps in the Dakar and the top one was in 94th spot as of yesterday.
GPER is offline   Reply With Quote
Old 01-10-2014, 06:32 PM   #9
bootlegger
 
Join Date: Nov 2012
Posts: 59
After removing the belt , everything turns freely!!??
Good news is the oil looks fine and it drove back to the barn ok.I think i will change t stat, put a new hose and belt on ,fill up on critter killer and hope for the best.
bootlegger is offline   Reply With Quote
Old 01-10-2014, 08:27 PM   #10
tjrider
 
Join Date: May 2009
Location: fairfield
Posts: 320
My tj over heated at big rock last summer cause my electric fan motor gave up. It ran like **** for a while after I cooled it down, then was fine. They have to relearn after over heating
__________________
If you don't want it broke, don't let me drive it....
tjrider is offline   Reply With Quote
Old 01-10-2014, 10:49 PM   #11
WrenchMonkey
Mechanical Animal
- CORE Member -
- Moderator -
 
WrenchMonkey's Avatar
 
Join Date: Feb 2008
Location: Beechmont
Posts: 1,883
Quote:
Originally Posted by tjrider View Post
They have to relearn after over heating
Depends on the year. Pre-91 was Renix, and stone simple.

Overheated mine at DTOR after filling the radiator with mud. Cleaned it out and went on my merry way. No learning required...
__________________
DIRTY DEEDS, DONE DIRT CHEAP
Whatever doesn't kill you makes you stranger
WrenchMonkey is offline   Reply With Quote
Old 01-18-2014, 06:49 PM   #12
bootlegger
 
Join Date: Nov 2012
Posts: 59
Update: Today I put a new t-stat, water pump, upper hose and distilled water/ prestone mix and she seems fine.What a relief!!! And right before the snow started to fly.
It ran for way too long with the gauge pegged at 260 before I could get it off the road.So I was sure that it was going to be damaging.
BTW I'm a huge believer in Motorkote and I run it in all my vehicles.
bootlegger is offline   Reply With Quote
Old 01-18-2014, 07:10 PM   #13
WrenchMonkey
Mechanical Animal
- CORE Member -
- Moderator -
 
WrenchMonkey's Avatar
 
Join Date: Feb 2008
Location: Beechmont
Posts: 1,883
Good deal!

For what it's worth, I'm a huge believer in the 4-0. Awful hard to kill the bastards!
__________________
DIRTY DEEDS, DONE DIRT CHEAP
Whatever doesn't kill you makes you stranger
WrenchMonkey is offline   Reply With Quote
Old 01-18-2014, 10:36 PM   #14
underpowered
They call me......Scuba
 
Join Date: Sep 2010
Location: Burlington, KY
Posts: 292
Quote:
Originally Posted by WrenchMonkey View Post
Good deal!

For what it's worth, I'm a huge believer in the 4-0. Awful hard to kill the bastards!
x2.

the 4.0 in my old 95 ZJ has had the temp gauge buried multiple times, ran at the rev limiter for extended periods of time, been on Fire, and just generally beat on and still fires up and runs like a champ through all the abuse.
__________________
beat up rusted out k5
underpowered is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.