Weld on locks

Nuts · 07-10-2014, 08:25 PM

They are for 15" wheels, 2'' wide rings with 32, .375" holes. Just plane jane keep the tires on the wheels beadlocks. $125 a set.
513-283-7582

Nuts · 07-14-2014, 08:06 PM

BLEMS are gone. As of now I still have 3 good sets for $125 each but 1 set is pending

scotty85 · 09-17-2014, 03:12 PM

are you able to do a 16.5 set? if so,how much? no hurry on them

Nuts · 09-17-2014, 07:23 PM

I can, but with 16.5s the inner bead will slip off unless you weld a "safety" lip inside the wheel. I can also make those

$135 for the locks and $20 for weld on safety lips.

scotty85 · 09-17-2014, 07:33 PM

Cool,I'll take a set.

What is the safety lip? Like a piece of small rod?

Nuts · 09-17-2014, 08:03 PM

Pretty much. I burn a half circle out on the plasma table that's 1/8" x1/8" square. Once the tire pops over it theres no coming off! Text me and I can send a picture of mine welded on. 513-283-7582

Nuts · 10-06-2014, 07:50 AM

I have 6 sets ready to go. $125 picked up and will ship for $150-$160 depending on where they're going.

Nuts · 10-20-2014, 03:57 PM

Nuts · 11-06-2014, 10:40 PM

4 sets left, one time only deal for $120 a set. When these are gone they're gone. I won't be making anymore for probably the next year atleast.

07-10-2014, 08:25 PM	#1
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	Weld on locks They are for 15" wheels, 2'' wide rings with 32, .375" holes. Just plane jane keep the tires on the wheels beadlocks. $125 a set. 513-283-7582 Last edited by Nuts; 10-20-2014 at 03:57 PM.

09-17-2014, 03:12 PM	#3
scotty85 build it,not buy it! Join Date: Jan 2007 Location: dayton,oh Posts: 35	are you able to do a 16.5 set? if so,how much? no hurry on them __________________ scotty 85 grand wagoneer(whats left of it) 77 scout II truggy 84 chevy "home made crewcab" Delightfully Tacky,Yet Unrefined

09-17-2014, 07:33 PM	#5
scotty85 build it,not buy it! Join Date: Jan 2007 Location: dayton,oh Posts: 35	Cool,I'll take a set. What is the safety lip? Like a piece of small rod? __________________ scotty 85 grand wagoneer(whats left of it) 77 scout II truggy 84 chevy "home made crewcab" Delightfully Tacky,Yet Unrefined

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2014, 08:06 PM	#2
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	BLEMS are gone. As of now I still have 3 good sets for $125 each but 1 set is pending

09-17-2014, 07:23 PM	#4
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	I can, but with 16.5s the inner bead will slip off unless you weld a "safety" lip inside the wheel. I can also make those $135 for the locks and $20 for weld on safety lips.

09-17-2014, 08:03 PM	#6
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	Pretty much. I burn a half circle out on the plasma table that's 1/8" x1/8" square. Once the tire pops over it theres no coming off! Text me and I can send a picture of mine welded on. 513-283-7582

10-06-2014, 07:50 AM	#7
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	I have 6 sets ready to go. $125 picked up and will ship for $150-$160 depending on where they're going.

10-20-2014, 03:57 PM	#8
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508

11-06-2014, 10:40 PM	#9
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	4 sets left, one time only deal for $120 a set. When these are gone they're gone. I won't be making anymore for probably the next year atleast.