07-25-2016, 10:14 AM
|
#1 |
|
Adrenaline Junkie
- CORE Member -
- Moderator - 
|
Windrock 2016 August 5th-7th
Will be rolling out for Windrock at a current undecided time on Thursday August 5th, this will be once again a awesome time that no one with a rig and the time should miss.
So far heading down is... Tool man Tim Runoveru2 -Jim C 93 Krawler - Kevin Waffle - Mark Beer goggles - Jim B cvaske - Chris
__________________
No need for a Winch...You just have to make it !! Last edited by 93 Krawler; 07-25-2016 at 01:42 PM. |
|
|
|
07-25-2016, 01:50 PM
|
#3 |
|
>>>PMC<<<
- CORE Member -
- Administrator - 
|
Looks like we will all be leaving Thursday at different times. Mark and I will most likely leave by 3pm. Tim is unsure of what time he will be leaving. Chris will be leaving sometime mid afternoon after work.
|
|
|
|
|
07-26-2016, 08:22 PM
|
#4 |
Join Date: Jan 2014
Posts: 86
|
Man, Windrock is on my bucket list. Maybe next year.
Twist the knife and post up some photos after the event.
__________________
Facta, non Verba. 2001 Wrangler 2000 Wrangler TJ 1967 CJ5A 2004 Tow rig |
|
|
|
|
07-27-2016, 11:21 AM
|
#5 |
|
- CORE Member -
Join Date: Apr 2011
Location: Mt Washington
Posts: 188
|
Wish me luck on rebuilding what is left of the "unibody" on my jeep this weekend. If it is successful, I will be there !
|
|
|
|
|
07-27-2016, 01:58 PM
|
#6 | |
|
Adrenaline Junkie
- CORE Member -
- Moderator -
|
Quote:
__________________
No need for a Winch...You just have to make it !! |
|
|
|
|
|
07-27-2016, 02:00 PM
|
#7 | |
|
Adrenaline Junkie
- CORE Member -
- Moderator -
|
Quote:
__________________
No need for a Winch...You just have to make it !! |
|
|
|
|
|
07-27-2016, 02:05 PM
|
#8 |
|
- CORE Member -
Join Date: Apr 2011
Location: Mt Washington
Posts: 188
|
The problem is finding something substantial enough to build from. There is no cage in the area of the track bar mount. I wish I had a frame.... it would be an easy repair !
|
|
|
|
|
07-27-2016, 03:10 PM
|
#9 | |
|
Join Date: Sep 2014
Posts: 40
|
Quote:
Sent from my SM-G920V using Tapatalk |
|
|
|
|
|
07-28-2016, 10:12 AM
|
#10 | |
|
>>>PMC<<<
- CORE Member -
- Administrator -
|
Quote:
 Should've brought it over last weekend while I was sitting around doing nothing. If you bring it down early Saturday, we will get it fixed.
|
|
|
|
|
|
07-28-2016, 12:41 PM
|
#11 | |
|
- CORE Member -
Join Date: Apr 2011
Location: Mt Washington
Posts: 188
|
Quote:
Calm down Francis. I've been out of town, including getting hit while driving Sarah's car by a uninsured Meth-Head/Dealer in Alabama, making a cheap vacation very expensive and not very fun. I'm working on the Jeep this weekend. It will either be ready for Windrock or scrapped if the unibody is too far gone. You can't just throw a thick piece of steel at a uni-body, there is nothing to attach it to. You people with frames just don't understand! 
|
|
|
|
|
|
07-29-2016, 09:11 AM
|
#12 |
|
- CORE Member -
Join Date: Apr 2011
Location: Mt Washington
Posts: 188
|
The Damage:
"uni-frame" is completely split open at the bottom inside edge, where the trackbar was mounted. Motor mount barely attached, see the vertical cracks up both sides of the mount There is another vertical crack and buckle in the inside vertical plane of the frame about 8" rearward of motor mount. Frame is caved in at the bumpstop contact points.   I'm going to weld up all the cracks and plate the whole area (inner plane and bottom of the rail) with 1/8" plate, tied into the 10 gaguge that is already plating the outer part of the rail. I hope there is enough "good" metal there to attached the plates, that is just a few layers of sheet metal. |
|
|
|
|
07-29-2016, 01:10 PM
|
#13 |
|
Adrenaline Junkie
- CORE Member -
- Moderator -
|
Wow..they really screwed up when making that vehicle without a frame, what were they thinking ?
__________________
No need for a Winch...You just have to make it !! |
|
|
|
|
07-29-2016, 10:49 PM
|
#14 | |
|
Join Date: May 2009
Location: Union, KY
Posts: 225
|
Quote:
__________________
Ian 06 Toyota 4Runner |
|
|
|
|
|
07-30-2016, 03:08 AM
|
#17 | |
|
Mechanical Animal
- CORE Member -
- Moderator - 
Join Date: Feb 2008
Location: Beechmont
Posts: 1,883
|
Quote:
The trackbar mount, up front, requires a little more creativity.
__________________
DIRTY DEEDS, DONE DIRT CHEAP
Whatever doesn't kill you makes you stranger |
|
|
|
|
|
07-30-2016, 09:41 PM
|
#18 |
|
- CORE Member -
Join Date: Apr 2011
Location: Mt Washington
Posts: 188
|
The whole frame from front to back was already plated.... It's getting more plate! Not a lot you can do about metal fatigue. I repaired at least 12 different cracks today. Looks like it should be ready to go after I put another layer of plating on.
|
|
|
|
|
07-31-2016, 10:28 PM
|
#19 |
|
- CORE Member -
Join Date: Apr 2011
Location: Mt Washington
Posts: 188
|
My frame repair is done. I hope it last awhile.... because I don't want to do that again !
|
|
|
|
|
08-07-2016, 09:54 PM
|
#22 |
|
Adrenaline Junkie
- CORE Member -
- Moderator -
|
We rolled out from Tool man's bout 5pm for Windrock on Thursday and got all of our rigs a good pre-wash from several flash flooding on our way, got to camp bout 10:30 and most of us were able to setup before we got a little more rain, was agreed by most that we just call it a night and get ready to head to the trail - head first thing in the morning. Had a good first day hitting a few good numbered trails, mother nature and rigs changed some of the terrain big time from last year. After a awesome day of Wheeling Jim B decided it would be best if he threw in the towel due and call it after he inspected his rig and realized his link bar mount had cracked and would need extensive repair. I had a Massive Air - leak develop in my Air regulator for my ARB locker so I had to head to camp at the end of the night on Friday. A Few of us attempted Rattle Rock on Saturday, about 2 hours in the mess we called it quits, alot of rain made it pretty tough, Mark of Course was able to make it through the first part only having to mean to his rig a few times, Good thanks to Mark on the Air regulator repair, we were able to make it work for the day Saturday only for it to start leaking again not Long after my truck decided it was best to take a Nap right after Kevin Snapped a rear main leaf of his Rig. Overall it was a absolute Awesome Wheeling trip, it was good to Wheel with Tool Man once again and hope we can get em to do more in the near future, was great to wheel with Chris and Jessica, by the way Chris you broke her in right for her first wheeling trip ever, we love to see what a Razor in your hands can do when it's under warranty...ha ha ha !!! It was good to meet your buddy Ethan in the Wildcat, let em know to get back out with us, Big thanks To Tool - man Tim for hauling our Rigs down, will have alot of pics to post up so keep checking daily.
__________________
No need for a Winch...You just have to make it !! Last edited by Runoveru2; 08-07-2016 at 10:38 PM. |
|
|
|
|
08-07-2016, 10:06 PM
|
#24 |
|
Adrenaline Junkie
- CORE Member -
- Moderator -
|
Got the bright idea that maybe I could drive up the left side of the rock and squeeze through the rough spot, gravity won this round, maybe could have saved it if I had gased on it when they yelled at me. Lost all my cooler water on my co-pilot when this happened. Thought he was gonna die of shock when the water hit em, Man it was hot out.
__________________
No need for a Winch...You just have to make it !! |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
