Is this ring gear trash?

BlackCJ · 10-14-2017, 01:25 PM

Pulled the cover off of a 14 Bolt FF axle and found this on the ring gear

. Since there's some pitting I assume it's officially junk, but I wanted to see if anyone has run gears that look like this with any luck.

JeffK5 · 10-15-2017, 12:08 PM

If the bearings are ok then I'd run um ...not even think twice on a trail rig but I'd keep and eye on them on the street. Sometimes pits are a good starting point for cracks.

93 Krawler · 10-15-2017, 09:16 PM

What he said...

10-14-2017, 01:25 PM	#1
BlackCJ Stuck Member Join Date: Oct 2012 Location: Dayton, OH Posts: 37 Images: 24	Is this ring gear trash? Pulled the cover off of a 14 Bolt FF axle and found this on the ring gear . Since there's some pitting I assume it's officially junk, but I wanted to see if anyone has run gears that look like this with any luck. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-15-2017, 12:08 PM	#2
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	If the bearings are ok then I'd run um ...not even think twice on a trail rig but I'd keep and eye on them on the street. Sometimes pits are a good starting point for cracks.

10-15-2017, 09:16 PM	#3
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	What he said...