14 Bolt...

Nuts · 06-08-2009, 03:01 PM

Do they really sell for this much?

http://cincinnati.craigslist.org/pts/1179453867.html

I thought a couple/few hundred was a good price for one.

94Dodge Truggy · 06-08-2009, 04:02 PM

14 bolts go for 100-300 in my area open, posi, locked etc... May have special gear oil in it.

sarge · 06-08-2009, 04:08 PM

dream on nucca !!!! like Truggy said $100-$300 max ....... Bad thing is , if the guy holds on to it long enough some poor bastard will give him that for it !!!!

Nuts · 06-08-2009, 06:04 PM

I didn't think that sounded right lol

JeffK5 · 06-08-2009, 06:46 PM

Anything with a Gov-Loc $50-75
............Open 3.73-4.10 $100-125
............Open 4.56 $125-150
............No-Spin 4.56 $375

I bought 14ff that came with a complete running 4x4 truck attached to it for $250 from a buddy of Sarge's..:p

blazerbrad · 06-09-2009, 09:14 AM

I see it every once in awhile.......people hear that a "1-ton axle" is worth $750-$1,000, but they don't understand that is only for a FRONT D60 and not for the rears.

The local small junkyard by me asks $100 for any fullsize truck axle except for a front D60.

carwash · 06-09-2009, 12:19 PM

"but you don't have to remove the axles to take off the brake drums"

hahah, i'd like to see him press these drums off the hubs without removing the axles and hubs...

blazerbrad · 06-09-2009, 01:35 PM

Quote:

Originally Posted by carwash

"but you don't have to remove the axles to take off the brake drums"

hahah, i'd like to see him press these drums off the hubs without removing the axles and hubs...

Well.....actually GM did start going to a slip-on drum design in later years so you don't have to remove the whole shaft and hub assembly to get to the brakes, and the pictures look like this is one of those axles.

carwash · 06-09-2009, 09:48 PM

oh, every 14 i've messed with I have had to use the big shop press to pop them off the hub.

kyrel69 · 06-12-2009, 01:49 PM

mmm... the one is my jeep was one of the older one and I just took out the studd and hit the drum with a big hammer a few time so I could get a pry bar in there and pop it off

06-08-2009, 03:01 PM	#1
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	14 Bolt... Do they really sell for this much? http://cincinnati.craigslist.org/pts/1179453867.html I thought a couple/few hundred was a good price for one.

06-08-2009, 04:02 PM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	14 bolts go for 100-300 in my area open, posi, locked etc... May have special gear oil in it. __________________

06-09-2009, 12:19 PM	#7
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	"but you don't have to remove the axles to take off the brake drums" hahah, i'd like to see him press these drums off the hubs without removing the axles and hubs... __________________

06-09-2009, 09:48 PM	#9
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	oh, every 14 i've messed with I have had to use the big shop press to pop them off the hub. __________________

06-08-2009, 04:08 PM	#3
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	dream on nucca !!!! like Truggy said $100-$300 max ....... Bad thing is , if the guy holds on to it long enough some poor bastard will give him that for it !!!!

06-08-2009, 06:04 PM	#4
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	I didn't think that sounded right lol

06-08-2009, 06:46 PM	#5
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	Anything with a Gov-Loc $50-75 ............Open 3.73-4.10 $100-125 ............Open 4.56 $125-150 ............No-Spin 4.56 $375 I bought 14ff that came with a complete running 4x4 truck attached to it for $250 from a buddy of Sarge's..:p

06-09-2009, 09:14 AM	#6
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	I see it every once in awhile.......people hear that a "1-ton axle" is worth $750-$1,000, but they don't understand that is only for a FRONT D60 and not for the rears. The local small junkyard by me asks $100 for any fullsize truck axle except for a front D60.

06-12-2009, 01:49 PM	#10
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	mmm... the one is my jeep was one of the older one and I just took out the studd and hit the drum with a big hammer a few time so I could get a pry bar in there and pop it off