Dana 30 hub conversion

itbrokeagain · 01-13-2010, 12:39 AM

Can I take Cj outer knuckles and do a hub conversion on my Xj and then put the bolt pattern adapter spacers on the back to make it all work?

kyrel69 · 01-13-2010, 07:49 AM

no,, the ball joint in a CJ go in the outter knuckles and the XJ are pressed into the inner knuckles.

But I did see were someone is makeing knuckles for the XJ(and other jeeps that use that knuckles) that use all the older hub parts

GPER · 01-13-2010, 09:29 AM

Should have just got a CJ, they last forever.

jfiscus · 01-13-2010, 09:59 AM

why? I would assume running a full-time front locker?

kyrel69 · 01-13-2010, 10:49 AM

http://www.reiderracing.com/product_...ducts_id=32424

here is a link to the knuckles I was talking about

itbrokeagain · 01-13-2010, 08:50 PM

Quote:

Originally Posted by jfiscus

why? I would assume running a full-time front locker?

For now i want to weld it and possibly put some good shafts and joints in. I also dont want to deal with the unit bearings

sarge · 01-15-2010, 03:14 PM

If you have a CJ 30 couldn't you use the inner C's and knuckles on the XJ 30 ??? just an idea .... prolly alot more work then it's worth but an idea.

kyrel69 · 01-15-2010, 04:13 PM

Quote:

Originally Posted by sarge

If you have a CJ 30 couldn't you use the inner C's and knuckles on the XJ 30 ??? just an idea .... prolly alot more work then it's worth but an idea.

well the tube size are different between the CJ dana 30 and the XJ dana 30.
Scotty has been wanting to do this for a while and has looked into it a lot. Maybe he will speak up

scotty85 · 01-15-2010, 05:11 PM

Quote:

Originally Posted by sarge

If you have a CJ 30 couldn't you use the inner C's and knuckles on the XJ 30 ??? just an idea .... prolly alot more work then it's worth but an idea.

depends on if you want to use a stock xj inner shaft. the Cs themselves are different lengths,due to hos the balljoints are pressed into the inner C on the xj.

the tube diameters are the same- you can carefully cut off the xj C and persuade the cj C onto the xj housing. however,you axle is essentially narrower now,so youll need a custom inner shaft

i have had this project on the back burner for a long time now,lol... in order to use stock xj inner shafts you need to space the cj inner C out a couple inches,in whatever manner you are comfortable. anywhere from changing out the tube (

) to sleeving it with something.

ive got cj Cs with a couple inches of tube still attached. when i determine exactly how much wider it needs to be im planning to weld the 2 tubes together,then sleeve the joint with 2 halves of tubing(welded together,and to each tube) another method that would be alittle more effort(unless you own a machine shop) would be to extend the xj housing with a bigger tube,then machine the cj inner Cs to slide over that larger diameter.

if you have any other questions let me know,or of it helps you any i can snap a few pics later. right now i gotta get movin to go help dave pick up his new junk

itbrokeagain · 01-15-2010, 05:27 PM

Nope but it sounds like more than I want to get into.

Did you ever do anything with that Super Duty axle?

scotty85 · 01-15-2010, 11:03 PM

nope im a slacker. too many irons inthe fire

WrenchMonkey · 01-16-2010, 02:17 AM

Quote:

Originally Posted by itbrokeagain

Did you ever do anything with that Super Duty axle?

I don't even like the SuperDuty axle under my SuperDuty. I certainly wouldn't infect a project rig with one...

Robert

01-13-2010, 12:39 AM	#1
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Dana 30 hub conversion Can I take Cj outer knuckles and do a hub conversion on my Xj and then put the bolt pattern adapter spacers on the back to make it all work? __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-15-2010, 05:27 PM	#10
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Nope but it sounds like more than I want to get into. Did you ever do anything with that Super Duty axle? __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-15-2010, 11:03 PM	#11
scotty85 build it,not buy it! Join Date: Jan 2007 Location: dayton,oh Posts: 35	nope im a slacker. too many irons inthe fire __________________ scotty 85 grand wagoneer(whats left of it) 77 scout II truggy 84 chevy "home made crewcab" Delightfully Tacky,Yet Unrefined

01-13-2010, 07:49 AM	#2
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	no,, the ball joint in a CJ go in the outter knuckles and the XJ are pressed into the inner knuckles. But I did see were someone is makeing knuckles for the XJ(and other jeeps that use that knuckles) that use all the older hub parts

01-13-2010, 09:29 AM	#3
GPER Join Date: Feb 2007 Location: Kettering, Ohio Posts: 811	Should have just got a CJ, they last forever.

01-13-2010, 09:59 AM	#4
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	why? I would assume running a full-time front locker?

01-13-2010, 10:49 AM	#5
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	http://www.reiderracing.com/product_...ducts_id=32424 here is a link to the knuckles I was talking about

01-15-2010, 03:14 PM	#7
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	If you have a CJ 30 couldn't you use the inner C's and knuckles on the XJ 30 ??? just an idea .... prolly alot more work then it's worth but an idea.