35's

dan · 02-02-2007, 12:10 AM

how bad would 35's be on a four bananger trying to decide on what tire size I want 35's but think the four banger would crap out or the ax5 would

carwash · 02-02-2007, 12:22 AM

with stock gears, yes it will bring the suck.

JET455 · 02-02-2007, 12:23 AM

you will need 4.88's to make it worth it.

JET455 · 02-02-2007, 12:47 AM

By the way I have some 35's here I need to move

did you ever get your blower/heat working?

Bear Chow · 02-02-2007, 08:35 AM

That ax5 will go long before the 4cyl. If you do the gears you'll be fine, stock is miserable. And you have to worry about the rear axle if it's a 35C.

dan · 02-02-2007, 10:29 PM

what kind of 35's, yea i got the heat working it was a twenty dollar switch

94Dodge Truggy · 02-02-2007, 10:48 PM

with stock axles? (35 & 30)

94Dodge Truggy · 02-02-2007, 11:12 PM

With stock axles and 4.88's I would find a light weight 33 that is not too wide. If you really want 35's try the super swamper tsl bias ply tires in a narrow width or the irocs.

dan · 02-02-2007, 11:24 PM

if i go 35's going to get a set of 44s, actually i need to do that any way so i'm in the market if anybody has some

94Dodge Truggy · 02-02-2007, 11:40 PM

I have a dana 44 with 4.56 ratio from a 1995 dodge ram. It comes with coil springs, steering linkage, steering box, steering pump, steering shaft, track bar, and 2 sets of extra inner axle shafts for the left and right side. 250.00

dan · 02-03-2007, 07:22 AM

where are u located and my next day off isn't until tuesday would i be able to check them out then

94Dodge Truggy · 02-03-2007, 10:14 AM

I may be able to do that. Let me see how this weekend goes.

dan · 02-03-2007, 08:44 PM

just let me know

dan · 02-04-2007, 12:54 AM

anybody know where to find some spring perches for a tj

sarge · 02-09-2007, 12:45 AM

http://www.ruffstuffspecialties.com/...83a9b87168749c

there you go !!!

dan · 02-09-2007, 08:47 AM

thanks sarge

carwash · 02-09-2007, 09:44 AM

sarge, yer a butthole, how bout "contact carwash for spring perches for a TJ"

damn you.

JET455 · 02-09-2007, 09:51 AM

Quote:

Originally Posted by carwash

sarge, yer a butthole, how bout "contact carwash for spring perches for a TJ"

damn you.

Ya! where's all your love Mike?

94Dodge Truggy · 02-09-2007, 09:58 AM

Hey dan, carwash has top notch quality spring perches made of the finest materials known to man and JET455 can weld em in better than anyone. And it could be done this weekend.

Maybe

sarge · 02-10-2007, 07:33 AM

ooooppppps, I like your PG-13 Butt Hole comment !! it made me feel all warm and fuzzy

Hey Dan ,

This guy on our board ..... I think his name is CRANKWASHER or something like that sells parts from Ruff Stuff ..... you might want to give him a call

dan · 02-10-2007, 08:40 AM

all right I'll get a hold of this crank washer guy first, hey carwash if you could pm me your number

sarge · 02-10-2007, 11:14 PM

hehehehehehehehe

02-02-2007, 12:10 AM	#1
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	35's how bad would 35's be on a four bananger trying to decide on what tire size I want 35's but think the four banger would crap out or the ax5 would

02-02-2007, 12:22 AM	#2
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	with stock gears, yes it will bring the suck. __________________

02-02-2007, 12:23 AM	#3
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	you will need 4.88's to make it worth it. __________________ if i am not currently offending you, i will be shortly.

02-02-2007, 12:47 AM	#4
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	By the way I have some 35's here I need to move did you ever get your blower/heat working? __________________ if i am not currently offending you, i will be shortly.

02-09-2007, 09:44 AM	#17
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	sarge, yer a butthole, how bout "contact carwash for spring perches for a TJ" damn you. __________________

02-02-2007, 08:35 AM	#5
Bear Chow Jeepless Join Date: Feb 2007 Location: Oxford, Oh Posts: 302	That ax5 will go long before the 4cyl. If you do the gears you'll be fine, stock is miserable. And you have to worry about the rear axle if it's a 35C.

02-02-2007, 10:29 PM	#6
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	what kind of 35's, yea i got the heat working it was a twenty dollar switch

02-02-2007, 10:48 PM	#7
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	with stock axles? (35 & 30)

02-02-2007, 11:12 PM	#8
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	With stock axles and 4.88's I would find a light weight 33 that is not too wide. If you really want 35's try the super swamper tsl bias ply tires in a narrow width or the irocs.

02-02-2007, 11:24 PM	#9
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	if i go 35's going to get a set of 44s, actually i need to do that any way so i'm in the market if anybody has some

02-02-2007, 11:40 PM	#10
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	I have a dana 44 with 4.56 ratio from a 1995 dodge ram. It comes with coil springs, steering linkage, steering box, steering pump, steering shaft, track bar, and 2 sets of extra inner axle shafts for the left and right side. 250.00

02-03-2007, 07:22 AM	#11
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	where are u located and my next day off isn't until tuesday would i be able to check them out then

02-03-2007, 10:14 AM	#12
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	I may be able to do that. Let me see how this weekend goes.

02-03-2007, 08:44 PM	#13
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	just let me know

02-04-2007, 12:54 AM	#14
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	anybody know where to find some spring perches for a tj

02-09-2007, 12:45 AM	#15
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	http://www.ruffstuffspecialties.com/...83a9b87168749c there you go !!!

02-09-2007, 08:47 AM	#16
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	thanks sarge

02-09-2007, 09:58 AM	#19
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Hey dan, carwash has top notch quality spring perches made of the finest materials known to man and JET455 can weld em in better than anyone. And it could be done this weekend. Maybe

02-10-2007, 07:33 AM	#20
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	ooooppppps, I like your PG-13 Butt Hole comment !! it made me feel all warm and fuzzy Hey Dan , This guy on our board ..... I think his name is CRANKWASHER or something like that sells parts from Ruff Stuff ..... you might want to give him a call

02-10-2007, 08:40 AM	#21
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	all right I'll get a hold of this crank washer guy first, hey carwash if you could pm me your number

02-10-2007, 11:14 PM	#22
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	hehehehehehehehe