3/16th plate steel

sarge · 02-28-2010, 10:46 AM

anyone need any , I got a deal ( I think ) on 4'x8'+ sheets if there is enough interest I may get a bunch. I'm going to pick some up on Monday , if it is good quality , as in rust and twist free I'll post up prices.

JeffK5 · 02-28-2010, 11:13 AM

I'd be down for one sheet once you get an idea of price... any chance for 1/8"?

How about Aluminium sheet?

Jeff

Hope Springs Hauler · 02-28-2010, 11:15 AM

I could use 1 as well

WrenchMonkey · 02-28-2010, 12:01 PM

Depending on the price, I might...

Thanks!

Robert

KennyTJ · 02-28-2010, 12:58 PM

I would be in for a sheet of 3/16" (or even 7ga.) may be up for 1/8" sheet as well. Let us know what price you can get.

sarge · 02-28-2010, 04:11 PM

can only get the 3/16 , I talked to my guy today and they will be out of the shop until midweek so I will be waiting on him to call me . I will let everyone know as soon as I get the first load. Looks like it's going to run about $100.00 for a full 4'x8' sheet. just a ball park guess , I will confirm when I pick mine up.

KennyTJ · 02-28-2010, 05:28 PM

I assume it's A36 plate and should be about 250lbs. per 4x8 sheet for 3/16". Have to figure how manny strong backs needed to load a sheet in the truck!

carwash · 02-28-2010, 08:07 PM

sarge, count me in....

boomhauer · 02-28-2010, 08:36 PM

i may be interested in a sheet depending on price...thanks

kyrel69 · 02-28-2010, 09:09 PM

I might be in too,, :)

gothodgie · 02-28-2010, 09:13 PM

Sorry gonna have to back out... After my truck dying today i need all the cash i got right now... If it ends up i can do it i'll let you know....
Thanks
Chris

03-01-2010, 01:41 AM

Quote:

Originally Posted by gothodgie

I could probably use 1/2 a sheet

I could use the other half if you wanted to cut a sheet in half

Got any pics?

JET455 · 03-01-2010, 03:10 AM

Quote:

Originally Posted by Brad@TORC

I could use the other half if you wanted to cut a sheet in half

Got any pics?

it looks like this from the side:)

_______________________________________________

03-01-2010, 03:11 AM

Are you sure thats 3/16"? Looks a little thin.

:p

JET455 · 03-01-2010, 03:15 AM

Quote:

Originally Posted by Brad@TORC

Are you sure thats 3/16"? Looks a little thin.

:p

is that better?

________________________________________

carwash · 03-01-2010, 10:17 AM

that doens't look quite like 8'... or 4' for that matter.

WrenchMonkey · 03-01-2010, 11:03 AM

Didn't you see Willy Wonka? When you transmit stuff over the innerweb, it comes out smaller on the other side.

Do I have to explain everything to you people?

Robert

gothodgie · 03-01-2010, 11:53 AM

Quote:

Originally Posted by JET455

it looks like this from the side:)

_______________________________________________

looks good...

sarge · 03-16-2010, 01:20 PM

I'm only going to be able to get about 6 sheets , it is straight , twist and rust free new plate and is 245 lbs.

I will be getting it next week I hope ! I will let everyone know when I get it . I will be bringing it to my house and putting it in the garage to keep it out of the weather . I will not deliver ! the **** is just too heavy to be loading and unloading ...... the cost is $95 a sheet . I have a plasma cutter and can cut a sheet in half if needed for cardboard box with frosty adult beverages inside.

If your in, and want a sheet post up , I will go in order of post.

Sarge

Hope Springs Hauler · 03-16-2010, 01:30 PM

Half sheet

What Brand

sarge · 03-16-2010, 01:52 PM

Quote:

Originally Posted by Hope Springs Hauler

Half sheet

What Brand

I'm a cheap bastard so, Natty light

jfiscus · 03-16-2010, 02:30 PM

on 2nd thought i'll take a whole sheet if available, but can you cut it in half?
My plasma has not made it home yet... :(

kyrel69 · 03-16-2010, 03:41 PM

I will take 1/2 a sheet

comanchedude · 03-16-2010, 04:46 PM

I will take half sheet

JeffK5 · 03-16-2010, 09:37 PM

I'll take a whole uncut sheet.. let me know if you need money before you get the sheets in your possession.

I can tell you that getting money up front is a good idea.. When I was pimping the 1/4" plate I had 20 people "commit" to wanting full and half sheets and when it came time to collect I was left holding the bag. It ended up taking 3 months of re-pimping to clear my garage of 6,000 lbs. of steel

Jeff

02-28-2010, 10:46 AM	#1
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	3/16th plate steel anyone need any , I got a deal ( I think ) on 4'x8'+ sheets if there is enough interest I may get a bunch. I'm going to pick some up on Monday , if it is good quality , as in rust and twist free I'll post up prices.

02-28-2010, 11:15 AM	#3
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	I could use 1 as well __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

02-28-2010, 12:01 PM	#4
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Depending on the price, I might... Thanks! Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

02-28-2010, 08:07 PM	#8
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	sarge, count me in.... __________________

02-28-2010, 08:36 PM	#9
boomhauer Join Date: Mar 2008 Posts: 188	i may be interested in a sheet depending on price...thanks __________________ 95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!!

02-28-2010, 11:13 AM	#2
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	I'd be down for one sheet once you get an idea of price... any chance for 1/8"? How about Aluminium sheet? Jeff

02-28-2010, 12:58 PM	#5
KennyTJ The Pirate Join Date: Oct 2007 Location: Lebanon, Oh. Posts: 297	I would be in for a sheet of 3/16" (or even 7ga.) may be up for 1/8" sheet as well. Let us know what price you can get.

02-28-2010, 04:11 PM	#6
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	can only get the 3/16 , I talked to my guy today and they will be out of the shop until midweek so I will be waiting on him to call me . I will let everyone know as soon as I get the first load. Looks like it's going to run about $100.00 for a full 4'x8' sheet. just a ball park guess , I will confirm when I pick mine up.

02-28-2010, 05:28 PM	#7
KennyTJ The Pirate Join Date: Oct 2007 Location: Lebanon, Oh. Posts: 297	I assume it's A36 plate and should be about 250lbs. per 4x8 sheet for 3/16". Have to figure how manny strong backs needed to load a sheet in the truck!

02-28-2010, 09:09 PM	#10
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	I might be in too,, :)

02-28-2010, 09:13 PM	#11
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	Sorry gonna have to back out... After my truck dying today i need all the cash i got right now... If it ends up i can do it i'll let you know.... Thanks Chris __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired Last edited by gothodgie; 03-16-2010 at 10:49 PM. Reason: truck died

03-01-2010, 03:11 AM	#14
Brad@TORC Guest Posts: n/a	Are you sure thats 3/16"? Looks a little thin. :p

03-01-2010, 10:17 AM	#16
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	that doens't look quite like 8'... or 4' for that matter. __________________

03-01-2010, 11:03 AM	#17
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Didn't you see Willy Wonka? When you transmit stuff over the innerweb, it comes out smaller on the other side. Do I have to explain everything to you people? Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

03-16-2010, 01:20 PM	#19
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	I'm only going to be able to get about 6 sheets , it is straight , twist and rust free new plate and is 245 lbs. I will be getting it next week I hope ! I will let everyone know when I get it . I will be bringing it to my house and putting it in the garage to keep it out of the weather . I will not deliver ! the **** is just too heavy to be loading and unloading ...... the cost is $95 a sheet . I have a plasma cutter and can cut a sheet in half if needed for cardboard box with frosty adult beverages inside. If your in, and want a sheet post up , I will go in order of post. Sarge

03-16-2010, 01:30 PM	#20
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	Half sheet What Brand __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

03-16-2010, 02:30 PM	#22
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	on 2nd thought i'll take a whole sheet if available, but can you cut it in half? My plasma has not made it home yet... :(

03-16-2010, 03:41 PM	#23
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	I will take 1/2 a sheet

03-16-2010, 04:46 PM	#24
comanchedude COMANCHE NUT Join Date: Jan 2007 Location: Ross Twp Posts: 166	I will take half sheet __________________ just don’t get stupid and stick a Chevy engine in your Jeep. Man I hate that

03-16-2010, 09:37 PM	#25
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	I'll take a whole uncut sheet.. let me know if you need money before you get the sheets in your possession. I can tell you that getting money up front is a good idea.. When I was pimping the 1/4" plate I had 20 people "commit" to wanting full and half sheets and when it came time to collect I was left holding the bag. It ended up taking 3 months of re-pimping to clear my garage of 6,000 lbs. of steel Jeff