Solid mounts

93 Krawler · 11-29-2011, 10:13 PM

Was thinking about making solid mounts on my rig to keep everything from moving around when I'm beating on it. I have poly mounts on the engine and trans now, and now realize after breaking the tail end of 2 transmissions that I need some kind of mount on the rear of the stock t-case. What are the pros and cons of using solid mounts? I'm sure vibrations are a con, but what else? I'm wondering if the poly mounts are any good to begin with.

humpy · 11-29-2011, 11:06 PM

Quote:

Originally Posted by 93 Krawler

Was thinking about making solid mounts on my rig to keep everything from moving around when I'm beating on it. I have poly mounts on the engine and trans now, and now realize after breaking the tail end of 2 transmissions that I need some kind of mount on the rear of the stock t-case. What are the pros and cons of using solid mounts? I'm sure vibrations are a con, but what else? I'm wondering if the poly mounts are any good to begin with.

My .02 is upgrade your t case crossmember to support the t case AND to support any rotational force... A good t case mount really needs to attach in at least 2 places... Something on centerline and somethin off one one side to protect from rotation and splitting end of your trans off... I would stay away from solid mounts because with chassis flex u will transferring problem to a different point... But again that's just what I have learned over the years

Nuts · 11-29-2011, 11:14 PM

I've had both and never had any trouble out of either except the vibrations with the solid mounts.

No matter what make them all solid or all bushings but do not use both.

carwash · 11-30-2011, 11:03 AM

The best way is to make sure you have the same amount of movement or lack of movement at every point. When movement is in different ranges, stuff breaks. Auxiliary mount on the tcase is a great thing.

93 Krawler · 11-30-2011, 09:29 PM

Thanks for the input. It looks like the trans mount is junk. I'm going to get a new poly trans mount and fab up a mount for the t-case. Better not break this time.

93 Krawler · 12-01-2011, 01:17 PM

Quote:

Originally Posted by stickman

If your up to it kevin, I'd gladly help you fab a rear mount like mine. It would take awhile but worth it. Here's what I'm talkin bout..... it's not a pic of my yota, but same mount I have.

I'm game. I was thinking along those lines, but only catching 2 or 3 bolts on the case on each side. Where are those pics from? Wondering what diameter bushings to use. Like a shock or sway bar bushing?

Also thinking about making something to attach the trans and t-case together where the trans and t-case adapter mounts are? That should be more solid than just the 4 bolts in the tail.

Will probably start on that tonight. Already got the tranny and t-case back in. I'd like to go wheelin somewhere next weekend so you can try out your rig.

humpy · 12-01-2011, 01:29 PM

http://www.ruffstuffspecialties.com/...t_Code=BUSHDOM

93 Krawler · 12-01-2011, 07:14 PM

Quote:

Originally Posted by stickman

My rig? Well sheeeeeaaaaaaatt. Guess I'll start finishing mine up.

What ya waitin on, Christmas...

The garage is sittin there empty waitin on ya...

93 Krawler · 12-01-2011, 09:47 PM

Quote:

Originally Posted by stickman

I'll have it there this weekend.

Sweet!!!

Got the rest of the trans crap hooked back up. It looks like I can hit 4 bolts on the passenger side and 3 bolts on the driver. Started making a cardboard template, will finish tomorrow. I can't believe that Energy Suspension poly mount gave out like it did. I thought they were tough. At 3 times the price of a stock one, they should be indestructable. I guess it couldn't handle my heavy foot.

Anyone local sell those bushings I need? I'd like to get it done this weekend.

humpy · 12-01-2011, 09:54 PM

What bushings?

93 Krawler · 12-01-2011, 10:00 PM

The bushings I need to mount the new brackets to the 1/4" skid plate that covers the bottom of the truck.

humpy · 12-01-2011, 10:36 PM

Like the ruffstuff ones I posted a link too?

race10 · 12-01-2011, 11:51 PM

Rhodus fab should have some or be able to get you some. He's not far from you if your in Ross. I might even have a couple sitting in the garage I could get to you if he has to order them. I go through Ross twice a day everyday of the week.

93 Krawler · 12-02-2011, 01:47 PM

Quote:

Originally Posted by humpy

Like the ruffstuff ones I posted a link too?

I could use those, but it seems a little over kill for this application. If I was supporting a big heavy case or doubler I could see. But it's just keeping the stock alum. case from rotating. I was thinking something smaller like a poly shock bushing. Maybe I'm wrong.

Quote:

Originally Posted by race10

Rhodus fab should have some or be able to get you some. He's not far from you if your in Ross. I might even have a couple sitting in the garage I could get to you if he has to order them. I go through Ross twice a day everyday of the week.

Never heard of that fab shop. Where they at? I may have you stop by. I'm 2 mins off 27 and 128.

race10 · 12-02-2011, 01:58 PM

He's on a side road off of layhigh rd. Hell of a good guy. Were you at off 128? I can throw a couple in the truck one day next week and swing by so you could see if they'd work for you.

93 Krawler · 12-02-2011, 03:47 PM

Quote:

Originally Posted by race10

He's on a side road off of layhigh rd. Hell of a good guy. Were you at off 128? I can throw a couple in the truck one day next week and swing by so you could see if they'd work for you.

I'm actually off of Layhigh near the Venice cemetary. I'll let you know, thanks.

93 Krawler · 12-08-2011, 09:35 PM

This is what I came up with to keep the t-case from twisting off the tail of my tranny again. Ended up using 2 1/2" x 3/4" bushings. This better do the trick. I'm out of extra transmissions.

humpy · 12-09-2011, 10:25 AM

Really need to connect those bottom main plates somehow... It will add tons of strength... Otherwise looks cool

jwend · 12-09-2011, 11:44 AM

Quote:

Originally Posted by humpy

Really need to connect those bottom main plates somehow... It will add tons of strength... Otherwise looks cool

Agreed.. you are still going to have a little twist.. wont be much but may be enough to brake somthing.. but it is a awesome design good work on it!

93 Krawler · 12-09-2011, 01:51 PM

Quote:

Originally Posted by jwend

Agreed.. you are still going to have a little twist.. wont be much but may be enough to brake somthing.. but it is a awesome design good work on it!

With the 1/4" skid plate tying both sides of the frame and cross member together, I wouldn't think it could move much. The brackets are bolted through the skid plate as well. I don't think I could get it mounted if they are tied together. It's real tight.

jwend · 12-10-2011, 11:05 AM

Quote:

Originally Posted by 93 Krawler

With the 1/4" skid plate tying both sides of the frame and cross member together, I wouldn't think it could move much. The brackets are bolted through the skid plate as well. I don't think I could get it mounted if they are tied together. It's real tight.

Gotcha, then just make sure what ever movement you have in your trans mount is the same amount as the transfer mount and engine mounts. I am sure you already knew that though..just want to make sure thought of it.. want you to keep it together so we can wheel together in 2012 when mines done..

carwash · 12-10-2011, 11:11 AM

Quote:

then just make sure what ever movement you have in your trans mount is the same amount as the transfer mount and engine mounts.

This is still my main concern, as said earlier. You have to duplicate mount movement at all point, or chit will break. One awesome mount won't cut it.

93 Krawler · 12-10-2011, 12:43 PM

Quote:

Originally Posted by jwend

Gotcha, then just make sure what ever movement you have in your trans mount is the same amount as the transfer mount and engine mounts. I am sure you already knew that though..just want to make sure thought of it.. want you to keep it together so we can wheel together in 2012 when mines done..

Quote:

Originally Posted by carwash

This is still my main concern, as said earlier. You have to duplicate mount movement at all point, or chit will break. One awesome mount won't cut it.

How does one figure that out? The poly engine mounts are stiff. The trans mount is more of a pivot point. The new t-case mounts are stiff. What else can I do besides beating on it and see what happens? A belhousing mount? A better frame to frame trans mount?

Tool Man · 12-10-2011, 09:28 PM

Quote:

Originally Posted by 93 Krawler

How does one figure that out? The poly engine mounts are stiff. The trans mount is more of a pivot point. The new t-case mounts are stiff. What else can I do besides beating on it and see what happens? A belhousing mount? A better frame to frame trans mount?

you can always test it out by beating the poo out of it at Big Rock where you broke before

11-29-2011, 10:13 PM	#1
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Solid mounts Was thinking about making solid mounts on my rig to keep everything from moving around when I'm beating on it. I have poly mounts on the engine and trans now, and now realize after breaking the tail end of 2 transmissions that I need some kind of mount on the rear of the stock t-case. What are the pros and cons of using solid mounts? I'm sure vibrations are a con, but what else? I'm wondering if the poly mounts are any good to begin with.

11-30-2011, 11:03 AM	#4
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	The best way is to make sure you have the same amount of movement or lack of movement at every point. When movement is in different ranges, stuff breaks. Auxiliary mount on the tcase is a great thing. __________________

12-01-2011, 01:29 PM	#7
humpy Join Date: Sep 2008 Posts: 573	http://www.ruffstuffspecialties.com/...t_Code=BUSHDOM __________________ S10 with a few air shocks..

12-01-2011, 09:54 PM	#10
humpy Join Date: Sep 2008 Posts: 573	What bushings? __________________ S10 with a few air shocks..

12-01-2011, 10:36 PM	#12
humpy Join Date: Sep 2008 Posts: 573	Like the ruffstuff ones I posted a link too? __________________ S10 with a few air shocks..

11-29-2011, 11:14 PM	#3
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	I've had both and never had any trouble out of either except the vibrations with the solid mounts. No matter what make them all solid or all bushings but do not use both.

11-30-2011, 09:29 PM	#5
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Thanks for the input. It looks like the trans mount is junk. I'm going to get a new poly trans mount and fab up a mount for the t-case. Better not break this time.

12-01-2011, 10:00 PM	#11
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	The bushings I need to mount the new brackets to the 1/4" skid plate that covers the bottom of the truck.

12-01-2011, 11:51 PM	#13
race10 Join Date: Dec 2010 Location: oxford Posts: 179	Rhodus fab should have some or be able to get you some. He's not far from you if your in Ross. I might even have a couple sitting in the garage I could get to you if he has to order them. I go through Ross twice a day everyday of the week.

12-02-2011, 01:58 PM	#15
race10 Join Date: Dec 2010 Location: oxford Posts: 179	He's on a side road off of layhigh rd. Hell of a good guy. Were you at off 128? I can throw a couple in the truck one day next week and swing by so you could see if they'd work for you.

12-08-2011, 09:35 PM	#17
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	This is what I came up with to keep the t-case from twisting off the tail of my tranny again. Ended up using 2 1/2" x 3/4" bushings. This better do the trick. I'm out of extra transmissions. Attached Thumbnails

12-09-2011, 10:25 AM	#18
humpy Join Date: Sep 2008 Posts: 573	Really need to connect those bottom main plates somehow... It will add tons of strength... Otherwise looks cool __________________ S10 with a few air shocks..