Dana 60

itbrokeagain · 08-26-2007, 04:29 PM

Is a full float rear 60 the same all years? Will shafts from one fit the other?

94Dodge Truggy · 08-26-2007, 05:27 PM

No. I have seen spline counts and shaft size vary.

JET455 · 08-26-2007, 10:43 PM

Quote:

Originally Posted by 94Dodge Truggy

No. I have seen spline counts and shaft size vary.

Yeah me to my Shaft is Bigger....:p

itbrokeagain · 08-26-2007, 11:51 PM

Any web sites that will tell you what you have?

94Dodge Truggy · 08-27-2007, 08:03 AM

The dom number on the tubing of the axle will usually help. Power clutch and drive were able to use that number to refrence. The ring and pinion also have markings on them which could help.

JET455 · 08-27-2007, 08:36 AM

take a look here..

http://www.autohobbydigest.com/dana.html

itbrokeagain · 08-28-2007, 12:07 AM

Wow. That was very helpful. Thank you.

JET455 · 08-28-2007, 12:23 AM

Quote:

Originally Posted by itbrokeagain

Wow. That was very helpful. Thank you.

NP

08-26-2007, 04:29 PM	#1
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Dana 60 Is a full float rear 60 the same all years? Will shafts from one fit the other? __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

08-26-2007, 11:51 PM	#4
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Any web sites that will tell you what you have? __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

08-27-2007, 08:36 AM	#6
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	take a look here.. http://www.autohobbydigest.com/dana.html __________________ if i am not currently offending you, i will be shortly.

08-28-2007, 12:07 AM	#7
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Wow. That was very helpful. Thank you. __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

08-26-2007, 05:27 PM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	No. I have seen spline counts and shaft size vary.

08-27-2007, 08:03 AM	#5
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	The dom number on the tubing of the axle will usually help. Power clutch and drive were able to use that number to refrence. The ring and pinion also have markings on them which could help.