Go Back   C.O.R.E. FORUM > Campfire > General Discussions

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-13-2010, 04:02 PM   #1
sarge
Pure Bacon
 
sarge's Avatar
 
Join Date: Jan 2007
Location: Trenton, Oh
Posts: 1,098
Project JimmyRig almost ready to begin.

plan A ,

I scored a set of 1 ton Dodge axles ( I'm not going to get into the whole ball joint / unit bearing vs. King pin issue , I don't care which is stronger, the axles were free and that means they kick the **** out of a $1200.00 King Pin axle )
This is going to be a very very low budget 1 ton project that I hope to be able to drive to Ky, wheel , and then drive home ...... :confused: well maybe not !!!! but you know what I mean ....

1999 GMC Jimmy 2 dr 4x4 ( the little ***** in my avatar ) $600.00 out of pocket , with an under 5k mile 4.3 crate motor.



Going to order a set of 37" military goodyears and hummer beadlocks from 406YJ on Pirate4x4 - $588.00 to my front door for all.

$600.00
+$588.00
__________
$1188.00 + Misc. stuff like steel and u-bolts ( $250.00)

$1438.00

I'm going SOA with stock Jimmy springs in the rear and maybe an extra leaf or two from the pile of springs that I have been hanging on to.

Front will be SOA also , was going to go coils but for a whole bunch of reasons I'm going to stick with leafs up front . going to try stock YJs , but may go with XJ's , pushing the axle foward about 6" and running an Astro van steering box .
Will be running hydro assist , built with tapped box and Surplus Center ram and fix'ns.

I'm stuck on a transfer case at this point , I'm drivers drop so I'm trying to research what will mate to my trans. May go with a 231C

Plan is to get everything gathered up in the next month and knock it out in a long week end and be ready to wheel before summer.

Plan B ,

I have a buddy searching the Co-parts auctions (Walton Ky and Columbus Oh) for a S-10 or Sonoma ext. cab that has been hit in the rear hard ( so it's cheap) or a 4 door S-10 ( I know , I know they are fairly rare ) but the cool factor would be through the roof !
Cut the rear frame off tube it out and dove tail it with the 1 tons and run at least 39.5's .

If I do the Jimmy and then find a truck I can go to the bone yard and grab some Jeep stockers and throw under her in an afternoon run my 32's and keep it a DD.

Stay tuned for the build,,,,, and or buildsssss
sarge is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.