Fusible links

itbrokeagain · 12-31-2010, 06:44 PM

So the last day of the Rocked to the Core tour my Yj quit running. Finally figured out it was a bad ECU. Popped a new one in and it ran for about 20 min then it quit. Found 2 fusible links blown at the solonoid. I am thinking that using the starter to put my Jeep on the trailer heated up the links and they finally blew. Cut them out and put fuse holders in. It ran fine all day today with fuses. It only says 20 guage on the wire. Does anyone know what this equals in amperage for a fuse. I ran 10 amp fuses but I want to make sure it is right

12-31-2010, 06:44 PM	#1
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Fusible links So the last day of the Rocked to the Core tour my Yj quit running. Finally figured out it was a bad ECU. Popped a new one in and it ran for about 20 min then it quit. Found 2 fusible links blown at the solonoid. I am thinking that using the starter to put my Jeep on the trailer heated up the links and they finally blew. Cut them out and put fuse holders in. It ran fine all day today with fuses. It only says 20 guage on the wire. Does anyone know what this equals in amperage for a fuse. I ran 10 amp fuses but I want to make sure it is right __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon. Last edited by itbrokeagain; 12-31-2010 at 08:16 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode