Going From An NP435 to TH400

Trigger · 08-08-2011, 06:17 PM

Asked this on Pirate and didn't get much response, so I figured I'd ask here. My current setup is 5.3L/NP435/Ford 205. I picked up a TH400 and am wanting to swap the 4-speed for the auto. I know that I'm going to need a different flywheel/adapter that I can get from AA to mate the tranny to the engine. I'm not too concerned about that, as it's only about $150 from AA. They also make an adapter that will mate the Ford 205 to the TH400, but it runs over $600 and I don't really want to spend that much.

Are there any cheaper alternatives to get this done? Anyone had any experience with doing it? Let me know.

08-08-2011, 06:17 PM	#1
Trigger Join Date: Mar 2007 Location: Xenia, OH Posts: 281	Going From An NP435 to TH400 Asked this on Pirate and didn't get much response, so I figured I'd ask here. My current setup is 5.3L/NP435/Ford 205. I picked up a TH400 and am wanting to swap the 4-speed for the auto. I know that I'm going to need a different flywheel/adapter that I can get from AA to mate the tranny to the engine. I'm not too concerned about that, as it's only about $150 from AA. They also make an adapter that will mate the Ford 205 to the TH400, but it runs over $600 and I don't really want to spend that much. Are there any cheaper alternatives to get this done? Anyone had any experience with doing it? Let me know.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode