2000 Dodge Truggy

94Dodge Truggy · 02-03-2008, 09:21 PM

Here I go towards another build! Got 2 going but put one on hold to concentrate on the smaller project.

Platform: 2000 Dodge (of course) Durango R/T with the 360, auto and heated leather seats and 6 disc cd/dvd

Axles: 2.5 ton rockwells with high steer, detroits, and spare inner axle shafts, wilwood 4 piston calipers and cross drilled and slotted rotors on pinion

Transfer case: Stak 3 speed 1.1, 3.0, 5.4

Driveshafts: 1410 joints, 12'' spline length, 1/4 wall alloy tubing

Tools and recovery: Onboard air, highlift jack, 12,000lb winch, CB

Front suspension: 4 link with track bar, 14'' swayaway coilovers

Rear suspension: Triangulated 4 link, 16'' 2.5 king air shocks

Steering: PSC full hydraulic

Electric: 190 amp alternator, auxilary lighting

1.750 DOM cage

Wheels: usa 6x6, humvee or stazworks 16 x 10 dual beadlocks I think

Tires: Interco super swamper tsl 42's, 44's or LTB 47's I think

Working towards 120'' wheelbase, 88'' width, 86'' height (crossing my fingers on these numbers) Needs to fit into my trailer and on the trails!

Weight estimated at 5,000 lbs.

Planning on wheeling with the body for 1 year or until it gets hard to get into as the body crumbles and squishes! I have been taking pictures and really just got started but hope to be running by april. I will learn how to post pics. with this thread so cross your fingers and wish me luck on the build and more luck on the pics. posting!

Lookin for advice on rims, tires and hydraulic steering. :confused: Thanks, Scott

02-03-2008, 09:21 PM	#1
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	2000 Dodge Truggy Here I go towards another build! Got 2 going but put one on hold to concentrate on the smaller project. Platform: 2000 Dodge (of course) Durango R/T with the 360, auto and heated leather seats and 6 disc cd/dvd Axles: 2.5 ton rockwells with high steer, detroits, and spare inner axle shafts, wilwood 4 piston calipers and cross drilled and slotted rotors on pinion Transfer case: Stak 3 speed 1.1, 3.0, 5.4 Driveshafts: 1410 joints, 12'' spline length, 1/4 wall alloy tubing Tools and recovery: Onboard air, highlift jack, 12,000lb winch, CB Front suspension: 4 link with track bar, 14'' swayaway coilovers Rear suspension: Triangulated 4 link, 16'' 2.5 king air shocks Steering: PSC full hydraulic Electric: 190 amp alternator, auxilary lighting 1.750 DOM cage Wheels: usa 6x6, humvee or stazworks 16 x 10 dual beadlocks I think Tires: Interco super swamper tsl 42's, 44's or LTB 47's I think Working towards 120'' wheelbase, 88'' width, 86'' height (crossing my fingers on these numbers) Needs to fit into my trailer and on the trails! Weight estimated at 5,000 lbs. Planning on wheeling with the body for 1 year or until it gets hard to get into as the body crumbles and squishes! I have been taking pictures and really just got started but hope to be running by april. I will learn how to post pics. with this thread so cross your fingers and wish me luck on the build and more luck on the pics. posting! Lookin for advice on rims, tires and hydraulic steering. :confused: Thanks, Scott