Yes Virginia, it does exist...

KargoMaster · 12-31-2008, 08:01 PM

It's at least sitting on 4 tires now... that's far more than I can say for the last few years... I had to CUT the frame out of the weeds (glad that I repainted the whole thing a few years ago)... it was amazing how much growth there was...

60/14 all fresh... 14 bolt shaved, Dana 60 now all 35spl
(14 full spool, 60 full Detroit)

Engine mounts for the 5.0L done... pics below (yes, it's painted now.)
NP435 done
NP203 needs reassembled (easier mockup empty)
Dana300 needs reassembled (easier mockup empty)

4-Link tube is ready to be cut to length... one end with threaded forged Johnny Joints already in, and the other will be welded JJ once cut to length.

It's a start...

The Wrangler MT 37's are rollers/street... 39.5 Iroks seen in back. (5 pressed wheel centers just showed up, so they will get torn down/cut/re-welded soon.)

12-31-2008, 08:01 PM	#1
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	Yes Virginia, it does exist... It's at least sitting on 4 tires now... that's far more than I can say for the last few years... I had to CUT the frame out of the weeds (glad that I repainted the whole thing a few years ago)... it was amazing how much growth there was... 60/14 all fresh... 14 bolt shaved, Dana 60 now all 35spl (14 full spool, 60 full Detroit) Engine mounts for the 5.0L done... pics below (yes, it's painted now.) NP435 done NP203 needs reassembled (easier mockup empty) Dana300 needs reassembled (easier mockup empty) 4-Link tube is ready to be cut to length... one end with threaded forged Johnny Joints already in, and the other will be welded JJ once cut to length. It's a start... The Wrangler MT 37's are rollers/street... 39.5 Iroks seen in back. (5 pressed wheel centers just showed up, so they will get torn down/cut/re-welded soon.) __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway... Last edited by KargoMaster; 01-01-2009 at 03:20 PM.