Truggy Build 3.0

94Dodge Truggy · 11-15-2017, 05:14 PM

Building a truggy from a 2004 Dodge Ram 1500.

Picked this up from Cincy Thouroubred Harley Davidson. Was a parts hauler till it got side swiped on the highway.
Parts that I will be keeping on the truck are part of the front end, most of the frame, motor, trans and cab. Sold most of what I am not using to help the funds. Still wondering if the cab should go or not.

Here is what I am currently thinking of using for this build.

97 Dodge dually Dana 60 front 4.10 gears welded (looking to upgrade shafts)

2004 GMC 2500 14 bolt 10.5 ring gear rear. Posi that I need to lock in some fashion.

Full hydro from PSC ? or homebrew

NP241 Rubicon t-case 4 to 1

1350 driveshafts. Have 2 fronts from JK builds that I will build up

42" Irok Stickies with Stazworks dual beadlocks (thanks Scott A)

Warn 8274 that I have had for quite a while

116" wheelbase possibly and shooting for under 5000 lbs.

4 link front with track bar, 3 link rear with track bar, 4" JK springs, looking into heim joint brands

11-15-2017, 05:14 PM	#1
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Truggy Build 3.0 Building a truggy from a 2004 Dodge Ram 1500. Picked this up from Cincy Thouroubred Harley Davidson. Was a parts hauler till it got side swiped on the highway. Parts that I will be keeping on the truck are part of the front end, most of the frame, motor, trans and cab. Sold most of what I am not using to help the funds. Still wondering if the cab should go or not. Here is what I am currently thinking of using for this build. 97 Dodge dually Dana 60 front 4.10 gears welded (looking to upgrade shafts) 2004 GMC 2500 14 bolt 10.5 ring gear rear. Posi that I need to lock in some fashion. Full hydro from PSC ? or homebrew NP241 Rubicon t-case 4 to 1 1350 driveshafts. Have 2 fronts from JK builds that I will build up 42" Irok Stickies with Stazworks dual beadlocks (thanks Scott A) Warn 8274 that I have had for quite a while 116" wheelbase possibly and shooting for under 5000 lbs. 4 link front with track bar, 3 link rear with track bar, 4" JK springs, looking into heim joint brands Attached Thumbnails __________________ Last edited by 94Dodge Truggy; 11-15-2017 at 05:19 PM.