Lug Nut seized!! - Page 2

Bear Chow · 04-29-2009, 11:58 AM

I would just weld a good nut to the end of each one of those lug nuts and prepare myself to spend money on new ones. (they do get pricey when you add them up) If you can't do that is the vehicle mobile? I'm sure a goodyear, tire discounter, or even walmart would be happy to exchange some dollars for some labor.

bigbadxj · 04-29-2009, 04:36 PM

Quote:

Originally Posted by Bear Chow

I would just weld a good nut to the end of each one of those lug nuts and prepare myself to spend money on new ones. (they do get pricey when you add them up) If you can't do that is the vehicle mobile? I'm sure a goodyear, tire discounter, or even walmart would be happy to exchange some dollars for some labor.

I may just do that! take it and say I can't get them off and not tell them that they are stripped, seized, and completely ****afied!

Bear Chow · 04-29-2009, 04:58 PM

No matter what you bring them, they have seen worst.

JeffK5 · 04-29-2009, 06:40 PM

Drill it out ... carbide faced masonry bit if a regular cobalt/HSS twist drill has problems dealing with the stud material.

Step drill up to something close to the dia. of the stud ....then drive a hex bodied chisel into the hole ... put adjustable wrench on the hex body and work whats left of the nut/stud in various directions until metal fatigue becomes your friend...enjoy

bigbadxj · 04-29-2009, 10:56 PM

Thanks for all the help guys and I'll let you know when and how I get them off!

GPER · 04-30-2009, 07:53 AM

And don't forget the anti seize the next time around.

8UP · 04-30-2009, 07:43 PM

Huh? Are we talkng about the factory nuts here? The ones with the crappy stamped cover on them? Hard to tell from your pics. If so split the cover off with a chisle, drive the smallest socket on the actual nut (usually metric) and turn 'em off. It's hard for me to believe you could drive a socket two sizes smaller than the nut if it's a solid nut.

bigbadxj · 05-01-2009, 01:18 AM

Quote:

Originally Posted by 8UP

Huh? Are we talkng about the factory nuts here? The ones with the crappy stamped cover on them? Hard to tell from your pics. If so split the cover off with a chisle, drive the smallest socket on the actual nut (usually metric) and turn 'em off. It's hard for me to believe you could drive a socket two sizes smaller than the nut if it's a solid nut.

Believe what you want but I did. Trust me No One wants these off more than I do! So I have no reason to lie. I tryed drilling into one and using a hex socket hammered it in there and snap one snap two snap three sockets your out! Then came the rain!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-29-2009, 11:58 AM	#26
Bear Chow Jeepless Join Date: Feb 2007 Location: Oxford, Oh Posts: 302	I would just weld a good nut to the end of each one of those lug nuts and prepare myself to spend money on new ones. (they do get pricey when you add them up) If you can't do that is the vehicle mobile? I'm sure a goodyear, tire discounter, or even walmart would be happy to exchange some dollars for some labor.

04-29-2009, 04:58 PM	#28
Bear Chow Jeepless Join Date: Feb 2007 Location: Oxford, Oh Posts: 302	No matter what you bring them, they have seen worst.

04-29-2009, 06:40 PM	#29
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	Drill it out ... carbide faced masonry bit if a regular cobalt/HSS twist drill has problems dealing with the stud material. Step drill up to something close to the dia. of the stud ....then drive a hex bodied chisel into the hole ... put adjustable wrench on the hex body and work whats left of the nut/stud in various directions until metal fatigue becomes your friend...enjoy

04-29-2009, 10:56 PM	#30
bigbadxj BIG DADDY Join Date: Mar 2009 Posts: 28	Thanks for all the help guys and I'll let you know when and how I get them off!

04-30-2009, 07:53 AM	#31
GPER Join Date: Feb 2007 Location: Kettering, Ohio Posts: 811	And don't forget the anti seize the next time around.

04-30-2009, 07:43 PM	#32
8UP Join Date: Oct 2008 Location: 1 Posts: 92	Huh? Are we talkng about the factory nuts here? The ones with the crappy stamped cover on them? Hard to tell from your pics. If so split the cover off with a chisle, drive the smallest socket on the actual nut (usually metric) and turn 'em off. It's hard for me to believe you could drive a socket two sizes smaller than the nut if it's a solid nut.