trying to figure out what a parts called

77k10 · 10-28-2009, 02:18 PM

Im new with jeeps and i have a 2000 xj thats lifted.... the part that runs across the front of the frame underneath the motor is loose... it connects to rods on each side with like a pin in them that can be adjusted higher or lower. Whats this called and i cand tighten it.. My numers 859 250 9560 if u wanna call it be greatly appreciated!

94Dodge Truggy · 10-28-2009, 02:31 PM

sounds like a front swaybar that is removeable possibly. Is the vehicle stock with no lift? Pics?

Flxratd · 10-28-2009, 03:53 PM

yeah sounds like swaybar dissconnects which should be connected in two places on the frame and then have a rod on each end going down to the axle.

if its loose at the frame hopefully the brackets are still there and all you need to do is tighten them or maybe replace a broken bolt if missing

if you could get a pic that would be the best and dont be afraid to be pointing to the problem area in the pic

jfiscus · 10-28-2009, 03:59 PM

sounds like adjustable swaybar links, possibly one of the bushings deteriorated & now it is loose. As mentioned above a picture says a thousand words.

77k10 · 10-28-2009, 04:21 PM

the vehicle is lifted... and ill take a pic when i get home... I believe it is the sway bar and the bolts dont tighten anymore so i think its the bushings but i dont know where to get raplacement bushings.... but its makig some noises

Coppertop · 10-28-2009, 07:22 PM

Yep,sounds like the sway bar and links.

Nick

jmb8813 · 10-29-2009, 12:53 AM

who needs sway bars

sarge · 11-06-2009, 10:18 AM

you can get bushing from Quadratec.com , I think the kit is 20 bucks from Poly.

10-28-2009, 02:18 PM	#1
77k10 Join Date: May 2008 Location: ft thomas Posts: 24	trying to figure out what a parts called Im new with jeeps and i have a 2000 xj thats lifted.... the part that runs across the front of the frame underneath the motor is loose... it connects to rods on each side with like a pin in them that can be adjusted higher or lower. Whats this called and i cand tighten it.. My numers 859 250 9560 if u wanna call it be greatly appreciated!

10-28-2009, 02:31 PM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	sounds like a front swaybar that is removeable possibly. Is the vehicle stock with no lift? Pics? __________________

10-28-2009, 03:53 PM	#3
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	yeah sounds like swaybar dissconnects which should be connected in two places on the frame and then have a rod on each end going down to the axle. if its loose at the frame hopefully the brackets are still there and all you need to do is tighten them or maybe replace a broken bolt if missing if you could get a pic that would be the best and dont be afraid to be pointing to the problem area in the pic __________________ One of these days Zuk 2.0

10-28-2009, 07:22 PM	#6
Coppertop XJWHEELING Join Date: Nov 2007 Location: Colerain Township Posts: 837	Yep,sounds like the sway bar and links. Nick __________________ Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille ..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-28-2009, 03:59 PM	#4
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	sounds like adjustable swaybar links, possibly one of the bushings deteriorated & now it is loose. As mentioned above a picture says a thousand words.

10-28-2009, 04:21 PM	#5
77k10 Join Date: May 2008 Location: ft thomas Posts: 24	the vehicle is lifted... and ill take a pic when i get home... I believe it is the sway bar and the bolts dont tighten anymore so i think its the bushings but i dont know where to get raplacement bushings.... but its makig some noises

10-29-2009, 12:53 AM	#7
jmb8813 01 jeep tj Join Date: May 2009 Location: the city that offers nothing Posts: 153	who needs sway bars

11-06-2009, 10:18 AM	#8
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	you can get bushing from Quadratec.com , I think the kit is 20 bucks from Poly.