tacoma truggy build

riegel · 01-28-2010, 03:55 PM

1998 tacoma.leafs in the front with toy axles,4 link and fox 2.0 rear.22r on propane.

KargoMaster · 01-28-2010, 05:27 PM

cool, I dig it...

hotrod · 01-28-2010, 06:34 PM

nice

JET455 · 01-28-2010, 06:56 PM

Looks good so far.

mckeddie · 01-28-2010, 09:19 PM

i like it, if the bed were half as nice as that cab though, i would have had a hard time cutting that thing up! i would love to have a tacoma identical to that.

chris_dishmon · 01-28-2010, 09:30 PM

you know i'm in on this one. are you using a tacoma or earlier frame? why not use the 3.4 or 2.7? are you using a 22r cause you got the drivetrain laying around to make a passenger side drop for the front axle? did you get the taco gutless?

srussell · 01-29-2010, 12:18 AM

Looks good
Love the grill

riegel · 01-29-2010, 11:20 AM

it had no drive train in her when i got it.its the taco frame. plus you dont see many with toy axles or a 22r and i had both lol.

riegel · 02-10-2010, 11:49 AM

new si@t

camospeedsquare · 02-11-2010, 11:15 AM

that grill is bad a$$ the truck looks good cant wait to wheel with it ,give me a call bout those shackles ,but truck looks great

chris_dishmon · 02-16-2010, 11:44 PM

keep up the good work.

riegel · 03-03-2010, 11:43 AM

some new stuff now that my pc works

KennyTJ · 03-03-2010, 11:12 PM

Wow, that rear is bobbed really short. Looks good though!

riegel · 03-19-2010, 02:12 PM

more of my junk

KargoMaster · 03-22-2010, 05:55 PM

I have a comment on one little aspect of the cage... Take it or leave it, it's just a comment...

If you were to "apply downward force" to that top bar (like rolling on your lid, for example... not that it will happen, purely hypothetical

) that little bend in the rear-most diagonals would give the force a direction to bend those diagonals... and they are going to bend toward the interior of the bed (and your "stuff" in it), while taking out the nice shocks... anyone else see this?
Hate to sound pirate-ish, but more triangulation?

Overall, I really dig this build... great stuff...

mckeddie · 03-22-2010, 09:41 PM

that was the exact thing that ran through my head brad. some sort of brace on that tube i think would be a good idea.

riegel · 03-24-2010, 01:39 PM

i dont have all the bracing done in the rear yet but thanks and keep them comming.

riegel · 04-28-2010, 02:07 PM

a little more

KargoMaster · 04-28-2010, 03:46 PM

Oh yeah, I like that MUCH better for that area of the cage that I noted...

Are these roller tires/wheels... (or is it camera angle?) They seem really close to the rear bumps on both sides... (as if one dropped, the other would be dragging the bump)

Nice clean design, I really do like it... I just ask too many questions...

riegel · 04-29-2010, 11:14 AM

yes those are rollers,it will have 37 boggers on it.its bumpstop at 6 inches of up. wanna keep her low as i can.

KargoMaster · 04-29-2010, 11:37 AM

I can appreciate keeping it low... guess I was talking about the sideways distance to the tires... if the wheels that you're going to run have less backspacing I would think that you'd be fine, but I'm looking at this...

Just feels like flexed out to one side, the opposite side would be dragging the bump or bump support... could be camera angle though...

If you're gonna keep a tool bag behind the Propane tank, would it make more sense to turn the schrader valves of the shock outward? (I was riding with Butch once when a freak tree branch came down and popped the schrader valve off... talk about surprising...

)

carwash · 04-29-2010, 11:45 AM

yer too damn bored brad... quit drawing pictures... if you need to critique and work on a rig, get the hell down here!! I got all kinds of pictures i need drawn...

riegel · 04-29-2010, 02:22 PM

the 37s have 2inches less backspace.and there is a plate thats not on there yet to block the valve.

riegel · 05-06-2010, 12:48 PM

almost there

riegel · 06-26-2010, 03:38 PM

done hunk of phoo

01-28-2010, 03:55 PM	#1
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	tacoma truggy build 1998 tacoma.leafs in the front with toy axles,4 link and fox 2.0 rear.22r on propane. Attached Thumbnails

01-28-2010, 05:27 PM	#2
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	cool, I dig it... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

01-28-2010, 06:34 PM	#3
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	nice __________________ 2013 RZR S

01-28-2010, 06:56 PM	#4
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	Looks good so far. __________________ if i am not currently offending you, i will be shortly.

01-28-2010, 09:19 PM	#5
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	i like it, if the bed were half as nice as that cab though, i would have had a hard time cutting that thing up! i would love to have a tacoma identical to that. __________________ zuk buggy.....it'll be a jeep eventually.

01-28-2010, 09:30 PM	#6
chris_dishmon "let's fab some $h!t up!! Join Date: Sep 2007 Location: Mt. Healthy Posts: 95	you know i'm in on this one. are you using a tacoma or earlier frame? why not use the 3.4 or 2.7? are you using a 22r cause you got the drivetrain laying around to make a passenger side drop for the front axle? did you get the taco gutless? __________________ I understand the Jeep thing.......that's why i drive a Toyota. '91 Toyota truck(3.0 to 3.4 swapped) "F@#k vacuum lines my truck sucks enough!"

01-29-2010, 12:18 AM	#7
srussell Join Date: Nov 2009 Location: Lancaster, Ohio Posts: 26	Looks good Love the grill

01-29-2010, 11:20 AM	#8
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	it had no drive train in her when i got it.its the taco frame. plus you dont see many with toy axles or a 22r and i had both lol.

02-10-2010, 11:49 AM	#9
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	new si@t Attached Thumbnails

02-11-2010, 11:15 AM	#10
camospeedsquare camospeedsquare Join Date: Dec 2009 Location: eastgate ohio Posts: 18	tight that grill is bad a$$ the truck looks good cant wait to wheel with it ,give me a call bout those shackles ,but truck looks great __________________ nasty native

02-16-2010, 11:44 PM	#11
chris_dishmon "let's fab some $h!t up!! Join Date: Sep 2007 Location: Mt. Healthy Posts: 95	keep up the good work. __________________ I understand the Jeep thing.......that's why i drive a Toyota. '91 Toyota truck(3.0 to 3.4 swapped) "F@#k vacuum lines my truck sucks enough!"

03-03-2010, 11:43 AM	#12
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	some new stuff now that my pc works Attached Thumbnails

03-03-2010, 11:12 PM	#13
KennyTJ The Pirate Join Date: Oct 2007 Location: Lebanon, Oh. Posts: 297	Wow, that rear is bobbed really short. Looks good though!

03-19-2010, 02:12 PM	#14
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	more of my junk Attached Thumbnails

03-22-2010, 05:55 PM	#15
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	I have a comment on one little aspect of the cage... Take it or leave it, it's just a comment... If you were to "apply downward force" to that top bar (like rolling on your lid, for example... not that it will happen, purely hypothetical ) that little bend in the rear-most diagonals would give the force a direction to bend those diagonals... and they are going to bend toward the interior of the bed (and your "stuff" in it), while taking out the nice shocks... anyone else see this? Hate to sound pirate-ish, but more triangulation? Overall, I really dig this build... great stuff... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway... Last edited by KargoMaster; 03-23-2010 at 08:58 AM.

03-22-2010, 09:41 PM	#16
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	that was the exact thing that ran through my head brad. some sort of brace on that tube i think would be a good idea. __________________ zuk buggy.....it'll be a jeep eventually.

03-24-2010, 01:39 PM	#17
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	i dont have all the bracing done in the rear yet but thanks and keep them comming.

04-28-2010, 02:07 PM	#18
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	a little more Attached Thumbnails

04-28-2010, 03:46 PM	#19
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	Oh yeah, I like that MUCH better for that area of the cage that I noted... Are these roller tires/wheels... (or is it camera angle?) They seem really close to the rear bumps on both sides... (as if one dropped, the other would be dragging the bump) Nice clean design, I really do like it... I just ask too many questions... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

04-29-2010, 11:14 AM	#20
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	yes those are rollers,it will have 37 boggers on it.its bumpstop at 6 inches of up. wanna keep her low as i can.

04-29-2010, 11:37 AM	#21
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	I can appreciate keeping it low... guess I was talking about the sideways distance to the tires... if the wheels that you're going to run have less backspacing I would think that you'd be fine, but I'm looking at this... Just feels like flexed out to one side, the opposite side would be dragging the bump or bump support... could be camera angle though... If you're gonna keep a tool bag behind the Propane tank, would it make more sense to turn the schrader valves of the shock outward? (I was riding with Butch once when a freak tree branch came down and popped the schrader valve off... talk about surprising... ) __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

04-29-2010, 11:45 AM	#22
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	yer too damn bored brad... quit drawing pictures... if you need to critique and work on a rig, get the hell down here!! I got all kinds of pictures i need drawn... __________________

04-29-2010, 02:22 PM	#23
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	the 37s have 2inches less backspace.and there is a plate thats not on there yet to block the valve.

05-06-2010, 12:48 PM	#24
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	almost there Attached Thumbnails

06-26-2010, 03:38 PM	#25
riegel hellbilly fab Join Date: Dec 2009 Location: circleville ohio Posts: 34	done hunk of phoo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode