Hydrographics, camo dipping

customizer1000 · 03-17-2012, 03:07 PM

I recently started a company doing camo dipping as well as a thousand other patterns, if you have any questions just ask, thanks.

TrooperII · 03-18-2012, 09:57 PM

What is some of the basic pricing? How big of a piece can you do?

customizer1000 · 03-18-2012, 10:01 PM

Price varies depending on size color and patterns, biggest pieces I usually do are like dash trim, can do bigger but that's just the biggest normally

sarge · 03-19-2012, 12:24 PM

post up you contact information , or PM me . my Chief is interested .

customizer1000 · 03-19-2012, 12:28 PM

Website is www.liquidinnovationsbydeano.com its partially working lol my cell is 937.751.3769 thank you.

sarge · 03-19-2012, 02:28 PM

past on ! Thanks

customizer1000 · 03-19-2012, 02:48 PM

Thanks a lot!

KillerKoatings · 03-19-2012, 04:44 PM

Just out of curiosity if you do a piece and it is flawed how hard is it to strip the part and do it again?

customizer1000 · 03-19-2012, 04:56 PM

Let it dry and sand it all back down. Ask me how I know lol

cheapthrills49 · 04-03-2012, 07:20 AM

can you do al. propane tanks? would i have to take the valve and other junk off and place a plug in them or could you just "mask" these parts off

customizer1000 · 04-03-2012, 11:50 PM

Yeah can do them, I could just mask that stuff up not an issue

cheapthrills49 · 04-07-2012, 04:48 AM

So how permanent is this process? Is it electronicly bonded kinda like electro static paint? I know, or at least I think I know, cuz I saw on "how it's made"

lol they dipped some plastic fenders in, so on metal its the same process?

How does it come off or what not. Does it tend to flake or peel off like a sticker after you initially scratch or gouge it? Or will it be completely bonded and have to wear off or sand

Thanks, Ian

customizer1000 · 04-07-2012, 08:54 AM

Well its just like how a car gets painted but an added step. primer,basecoat, then dipped then clearcoat, the ink from the graphic actually etches itself into the basecoat color, doesnt flake or chip anymore then car paint does on a car

cheapthrills49 · 04-08-2012, 12:04 AM

Ok thats what i needed to hear, how much to "woodgrain" three propane tanks? If you have to order the mat. about how much would you be able to do........"woodgrain" my entire axle tubes lol!

gothodgie · 04-08-2012, 12:12 AM

Quote:

Originally Posted by cheapthrills49

........"woodgrain" my entire axle tubes lol!

oh hell yea!!!

customizer1000 · 04-08-2012, 01:18 AM

Quote:

Originally Posted by cheapthrills49

Ok thats what i needed to hear, how much to "woodgrain" three propane tanks? If you have to order the mat. about how much would you be able to do........"woodgrain" my entire axle tubes lol!

Pmd

cheapthrills49 · 04-08-2012, 01:01 PM

Quote:

Originally Posted by customizer1000

Pmd

Try to send it again, I didn't get it.

Thanks, Ian

chris_dishmon · 05-22-2012, 03:08 PM

nevermind. i just realized "dipping" is just a process to apply a sticker. "dipping" makes it sound like it's applied like chrome in the sense it's more scientifically done with ions and electrons and all that good ****.

customizer1000 · 06-15-2012, 03:55 PM

It's far from a sticker, it is ink embedded into a basecoat

03-17-2012, 03:07 PM	#1
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	Hydrographics, camo dipping I recently started a company doing camo dipping as well as a thousand other patterns, if you have any questions just ask, thanks.

03-18-2012, 09:57 PM	#2
TrooperII Isuzu's in the house Join Date: Feb 2007 Location: Franklin, ohio Posts: 60	What is some of the basic pricing? How big of a piece can you do? __________________ 03 Frontier Crewy (yeah) 85 Trooper lifted\caged and ragged top 89 Trooper RS (really short) x2 www.nightcrawlers4x4.com www.testtubegraphics.com

04-03-2012, 07:20 AM	#10
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	propane tanks can you do al. propane tanks? would i have to take the valve and other junk off and place a plug in them or could you just "mask" these parts off __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!!

04-07-2012, 04:48 AM	#12
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	So how permanent is this process? Is it electronicly bonded kinda like electro static paint? I know, or at least I think I know, cuz I saw on "how it's made" lol they dipped some plastic fenders in, so on metal its the same process? How does it come off or what not. Does it tend to flake or peel off like a sticker after you initially scratch or gouge it? Or will it be completely bonded and have to wear off or sand Thanks, Ian __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!!

04-08-2012, 12:04 AM	#14
cheapthrills49 VANILLA GORILLA Join Date: Oct 2007 Location: blanmolester, ohio.......stonelick lake Posts: 192	Ok thats what i needed to hear, how much to "woodgrain" three propane tanks? If you have to order the mat. about how much would you be able to do........"woodgrain" my entire axle tubes lol! __________________ I EAT BURRITOS ON EVERYTHING!!!!!!!!!

03-18-2012, 10:01 PM	#3
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	Price varies depending on size color and patterns, biggest pieces I usually do are like dash trim, can do bigger but that's just the biggest normally

03-19-2012, 12:24 PM	#4
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	post up you contact information , or PM me . my Chief is interested .

03-19-2012, 12:28 PM	#5
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	Website is www.liquidinnovationsbydeano.com its partially working lol my cell is 937.751.3769 thank you.

03-19-2012, 02:28 PM	#6
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	past on ! Thanks

03-19-2012, 02:48 PM	#7
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	Thanks a lot!

03-19-2012, 04:44 PM	#8
KillerKoatings Join Date: Jan 2011 Posts: 119	Just out of curiosity if you do a piece and it is flawed how hard is it to strip the part and do it again?

03-19-2012, 04:56 PM	#9
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	Let it dry and sand it all back down. Ask me how I know lol

04-03-2012, 11:50 PM	#11
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	Yeah can do them, I could just mask that stuff up not an issue

04-07-2012, 08:54 AM	#13
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	Well its just like how a car gets painted but an added step. primer,basecoat, then dipped then clearcoat, the ink from the graphic actually etches itself into the basecoat color, doesnt flake or chip anymore then car paint does on a car

05-22-2012, 03:08 PM	#18
chris_dishmon "let's fab some $h!t up!! Join Date: Sep 2007 Location: Mt. Healthy Posts: 95	nevermind. i just realized "dipping" is just a process to apply a sticker. "dipping" makes it sound like it's applied like chrome in the sense it's more scientifically done with ions and electrons and all that good ***. __________________ I understand the Jeep thing.......that's why i drive a Toyota. '91 Toyota truck(3.0 to 3.4 swapped) "F@#k vacuum lines my truck sucks enough!" Last edited by chris_dishmon; 05-22-2012 at 03:18 PM.*

06-15-2012, 03:55 PM	#19
customizer1000 Join Date: Mar 2012 Location: centerville / miamisburg Posts: 20	It's far from a sticker, it is ink embedded into a basecoat

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode