Installing laminate flooring

itbrokeagain · 01-03-2013, 07:37 PM

Getting ready to install the lock together laminate flooring. I have never done this. Any tips?

biggin69 · 01-03-2013, 07:42 PM

Its pretty easy. I like the stuff with the moisture barrier attached.

fastford · 01-04-2013, 02:35 PM

Pretty simple, I put some in our condo last year, just make sure you stagger the joints on each row

WrenchMonkey · 01-04-2013, 03:23 PM

It's high on my to-do list too.

The only bit that worries me is how to make it fit against the molding around the doors?

Ideas?

Robert

fastford · 01-04-2013, 04:01 PM

Quote:

Originally Posted by WrenchMonkey

It's high on my to-do list too.

The only bit that worries me is how to make it fit against the molding around the doors?

Ideas?

Robert

Take a scrap piece of flooring, and use a back cut saw , put scrap piece buy the door frame and cut bottoms of frame/moulding, new floor will slide under it

gothodgie · 01-04-2013, 04:21 PM

Quote:

Originally Posted by fastford

Take a scrap piece of flooring, and use a back cut saw , put scrap piece buy the door frame and cut bottoms of frame/moulding, new floor will slide under it

And you can also install a shoe mold after the floor is in to hide the edge around the baseboard...

itbrokeagain · 01-04-2013, 07:06 PM

The fun begins tonight. Hopefully I will be done Sunday. I have heard once you get it going it goes quick.

fastford · 01-04-2013, 07:41 PM

Quote:

Originally Posted by gothodgie

And you can also install a shoe mold after the floor is in to hide the edge around the baseboard...

Yeah around baseboard not doors though

gothodgie · 01-04-2013, 08:12 PM

Quote:

Originally Posted by fastford

Yeah around baseboard not doors though

did i say doors...

try your best to stay straight and square... It will make the end of the install much easier... a new blade with at least 44tpi will make the cuts much nicer too..

If you have any trouble give me a call i don't have anything going on this weekend...

comanchedude · 01-04-2013, 10:57 PM

When I did my kitchen I bought a metal tool that you use to slide on end of boards and tap with hammer to get them snug so the joints are tight. Helped a lot. . If you don't have one you may want to get one. It can be tough to get the last boards tight when your against the wall. This tool slides in tight ends . Just FYI .but the install is like doing a puzzle and its really easy.

fmlewis · 01-05-2013, 11:06 AM

For cutting door frames or similar i always use a pull saw. Place a scrap piece down and use the saw its a really thin saw and will cut really nice.

Also you will want to make sure you measure you room width so that your first and last pieces are similar widths. Not a big deal but its the details that make these installs look good.

Also buy the right tools. A knock block and an edge pull bar. These will eliminate floor damage.

Its pretty easy. Take your time and stagger the joints.

itbrokeagain · 01-07-2013, 12:12 PM

Done. It is very easy. I recommmend getting the flooring with padding attached. It would make it that much easier.

biggin69 · 01-07-2013, 12:20 PM

Quote:

Originally Posted by itbrokeagain

Done. It is very easy. I recommmend getting the flooring with padding attached. It would make it that much easier.

Quote:

Originally Posted by biggin69

Its pretty easy. I like the stuff with the moisture barrier attached.

93 Krawler · 01-07-2013, 12:41 PM

I had to put about 700 sq ft of this stuff down in a 2 bedroom apt in the basement. Had some long runs down the hallway that sucked real bad.

01-03-2013, 07:37 PM	#1
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Installing laminate flooring Getting ready to install the lock together laminate flooring. I have never done this. Any tips? __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-03-2013, 07:42 PM	#2
biggin69 Really??? Join Date: Sep 2009 Location: Cincy Posts: 678	Its pretty easy. I like the stuff with the moisture barrier attached. __________________ One Country, One Flag, One Language... LIKE IT OR LEAVE IT!!!

01-04-2013, 03:23 PM	#4
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	It's high on my to-do list too. The only bit that worries me is how to make it fit against the molding around the doors? Ideas? Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

01-04-2013, 07:06 PM	#7
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	The fun begins tonight. Hopefully I will be done Sunday. I have heard once you get it going it goes quick. __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-04-2013, 10:57 PM	#10
comanchedude COMANCHE NUT Join Date: Jan 2007 Location: Ross Twp Posts: 166	When I did my kitchen I bought a metal tool that you use to slide on end of boards and tap with hammer to get them snug so the joints are tight. Helped a lot. . If you don't have one you may want to get one. It can be tough to get the last boards tight when your against the wall. This tool slides in tight ends . Just FYI .but the install is like doing a puzzle and its really easy. __________________ just don’t get stupid and stick a Chevy engine in your Jeep. Man I hate that

01-04-2013, 02:35 PM	#3
fastford Banned Join Date: May 2007 Location: Hamilton OH Posts: 163 Images: 13	Pretty simple, I put some in our condo last year, just make sure you stagger the joints on each row

01-05-2013, 11:06 AM	#11
fmlewis The best damn Engineer!!! Join Date: Aug 2008 Location: Fairfield Posts: 135	For cutting door frames or similar i always use a pull saw. Place a scrap piece down and use the saw its a really thin saw and will cut really nice. Also you will want to make sure you measure you room width so that your first and last pieces are similar widths. Not a big deal but its the details that make these installs look good. Also buy the right tools. A knock block and an edge pull bar. These will eliminate floor damage. Its pretty easy. Take your time and stagger the joints.

01-07-2013, 12:12 PM	#12
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Done. It is very easy. I recommmend getting the flooring with padding attached. It would make it that much easier. __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

01-07-2013, 12:41 PM	#14
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	I had to put about 700 sq ft of this stuff down in a 2 bedroom apt in the basement. Had some long runs down the hallway that sucked real bad. Attached Thumbnails Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode