02-15-2013, 11:25 PM
|
#1 |
|
Join Date: Jan 2009
Location: Richmond, Indiana
Posts: 50
 |
2.46:1 Low Range Dana 20- INDIANA
REBUILT with 0 miles on transfer case. Includes a rear output gear for a T18. Could not use.
  $300.00. |
|
|
|
02-16-2013, 07:10 PM
|
#2 |
|
Cleaning off the rust...
Join Date: Jan 2007
Location: Cincinnati, OH
Posts: 1,009
|
So this one has big bore Dana18 gears in it? Cool!
I always wanted to try that back when I was running a 20... relatively easy gearing upgrade... Does this one have 10spl or 26spl outputs?
__________________
brad  5.0L | 435 | 203 | 300 | 4.10 | 39.5 Buildup BACK underway... 
|
|
|
|
|
02-17-2013, 01:06 AM
|
#3 |
|
Join Date: Jan 2009
Location: Richmond, Indiana
Posts: 50
|
This T/C has a combination of gears from a Jeep Dana 18 transfercase and an older Early Bronco Dana 20 put inside a clearanced Jeep Dana 20 case. This is why it has a 2.46:1 low range.
Don't really know if it has 10spl or 26spl outputs. A good friend built it and I thought I could run it. NOT!!!! Bummer... Last edited by cjbilly; 02-17-2013 at 03:52 PM. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
