sand/media blasting of a large item?

underpowered · 04-03-2013, 09:21 PM

looking for someone that has the capability to blast a large item, like the Flat bed on my truck.

ideally it would be great if they had a stand alone setup that could blast the bed while still on the truck as it is very large and heavy, but if need be it could be removed to go in a large room to blast.

I am just looking for a link to someone that can do it, as i figure it would be much easier to blast the bed before paint than spend Hours sanding it down to be painted, as it already has 2 layers on it which are flaking.

Hope Springs Hauler · 04-03-2013, 09:33 PM

Blasting Impressions on Donald drive in Fairfield, OH. He is used to doing big stuff (semi trailers....etc)

biggin69 · 04-04-2013, 07:21 AM

^^^ x2 ^^^

Flxratd · 04-04-2013, 06:55 PM

^^^708-3300 he has done several rear sections of semi frames with the cab still on so i dont think it would be an issue to leave it on....

04-03-2013, 09:21 PM	#1
underpowered They call me......Scuba Join Date: Sep 2010 Location: Burlington, KY Posts: 292	sand/media blasting of a large item? looking for someone that has the capability to blast a large item, like the Flat bed on my truck. ideally it would be great if they had a stand alone setup that could blast the bed while still on the truck as it is very large and heavy, but if need be it could be removed to go in a large room to blast. I am just looking for a link to someone that can do it, as i figure it would be much easier to blast the bed before paint than spend Hours sanding it down to be painted, as it already has 2 layers on it which are flaking. __________________ beat up rusted out k5

04-03-2013, 09:33 PM	#2
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	Blasting Impressions on Donald drive in Fairfield, OH. He is used to doing big stuff (semi trailers....etc) __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

04-04-2013, 07:21 AM	#3
biggin69 Really??? Join Date: Sep 2009 Location: Cincy Posts: 678	^^^ x2 ^^^ __________________ One Country, One Flag, One Language... LIKE IT OR LEAVE IT!!!

04-04-2013, 06:55 PM	#4
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	^^^708-3300 he has done several rear sections of semi frames with the cab still on so i dont think it would be an issue to leave it on.... __________________ One of these days Zuk 2.0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode