Building a mild SBC 350

4RunnerAdam · 10-09-2007, 06:05 PM

I'm going to be starting a long term project on my 4Runner. I'm going to yank the V6 and put in a Chevy 350. I plan on finding a cheap stock donor 350 and rebuilding it to maybe 225-275hp. I've never rebuilt a motor. This will be a learning experience for me. I'll do it in my spare time in the garage. Main focus here is CHEAP. I'll sell my V6 to buy some parts for the 350.

Any reccomendations on inexpensive performance parts? Any tips or tricks? Junkyard performance heads or anything like that? I'm going carb for now, maybe EFI in the future. I see a bunch of stuff in the Summit catalog, I just don't know what I should get. Of course I want good low torque, but a little top end won't hurt. This won't be a daily driver. Just a weekend toy.

One last thing. Any good rebuilding manuals? Something that goes step by step?

I'm going to use an Advance Adapters bellhousing to keep my stock trans and transfer.

94Dodge Truggy · 10-09-2007, 09:57 PM

Barnes and noble has a whole bunch of books on the popular 350 buildups. If you decide on a ford, dodge or amc build I have books you can borrow.

OH-cj5 · 10-09-2007, 10:02 PM

you may have the books scott but someone else always does the work LOL!

tjjeepjeep · 10-09-2007, 10:04 PM

Quote:

Originally Posted by OH-cj5

you may have the books scott but someone else always does the work LOL!

That's some funny stuff there.....

94Dodge Truggy · 10-09-2007, 10:06 PM

Ohcj4 you are sooooo funny! I built an 11hp briggs and stratton once when I was 13. How about that?

OH-cj5 · 10-09-2007, 10:11 PM

LOL but did it run? ok i have my blind fold on hand me the briggs motor so i can put it together for you scott LOL come on i'm just busting your chopps lets quit steeling this guys thread

sarge · 10-10-2007, 12:25 AM

with the HP numbers you are looking for you can purchase a TBI 350 out of the junk yard and not touch it . you will spend much more rebuilding one then you can purchase one for if you look for a good deal. you can find deals right around the 300-500 dollar mark all the time and alot of the yards will let you take the donor vehicle with you and bring it back when you are done yanking the motor , harness , ECM ......... if you are on a tighter budget then that , then I would suggest trying to find a 305 TBI motor out of a 90's Camaro or Truck .

10-09-2007, 06:05 PM	#1
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	Building a mild SBC 350 I'm going to be starting a long term project on my 4Runner. I'm going to yank the V6 and put in a Chevy 350. I plan on finding a cheap stock donor 350 and rebuilding it to maybe 225-275hp. I've never rebuilt a motor. This will be a learning experience for me. I'll do it in my spare time in the garage. Main focus here is CHEAP. I'll sell my V6 to buy some parts for the 350. Any reccomendations on inexpensive performance parts? Any tips or tricks? Junkyard performance heads or anything like that? I'm going carb for now, maybe EFI in the future. I see a bunch of stuff in the Summit catalog, I just don't know what I should get. Of course I want good low torque, but a little top end won't hurt. This won't be a daily driver. Just a weekend toy. One last thing. Any good rebuilding manuals? Something that goes step by step? I'm going to use an Advance Adapters bellhousing to keep my stock trans and transfer.

10-10-2007, 12:25 AM	#7
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	with the HP numbers you are looking for you can purchase a TBI 350 out of the junk yard and not touch it . you will spend much more rebuilding one then you can purchase one for if you look for a good deal. you can find deals right around the 300-500 dollar mark all the time and alot of the yards will let you take the donor vehicle with you and bring it back when you are done yanking the motor , harness , ECM ......... if you are on a tighter budget then that , then I would suggest trying to find a 305 TBI motor out of a 90's Camaro or Truck . Last edited by sarge; 10-10-2007 at 12:44 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-09-2007, 09:57 PM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Barnes and noble has a whole bunch of books on the popular 350 buildups. If you decide on a ford, dodge or amc build I have books you can borrow.

10-09-2007, 10:02 PM	#3
OH-cj5 Join Date: Feb 2007 Location: Waiting for obama to go away Posts: 90	you may have the books scott but someone else always does the work LOL!

10-09-2007, 10:06 PM	#5
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Ohcj4 you are sooooo funny! I built an 11hp briggs and stratton once when I was 13. How about that?

10-09-2007, 10:11 PM	#6
OH-cj5 Join Date: Feb 2007 Location: Waiting for obama to go away Posts: 90	LOL but did it run? ok i have my blind fold on hand me the briggs motor so i can put it together for you scott LOL come on i'm just busting your chopps lets quit steeling this guys thread