house insulation question...

yellowjacket · 10-06-2014, 01:16 PM

So the icing is actually called icenene i just found out.and itslike a hard foam when done. So i assume if u have 1 inchs worth put in then the batts that go over it have to be squished a bit..im not sure. If a 2x6 wall is 5.5, and the foam is 1, then you have 4.5 available..
So is the second type i mentioned worth the coin? It looks like regular insulation.blown in wet. And they kind of scrape it flush with the studs.

10-06-2014, 01:16 PM	#5
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	So the icing is actually called icenene i just found out.and itslike a hard foam when done. So i assume if u have 1 inchs worth put in then the batts that go over it have to be squished a bit..im not sure. If a 2x6 wall is 5.5, and the foam is 1, then you have 4.5 available.. So is the second type i mentioned worth the coin? It looks like regular insulation.blown in wet. And they kind of scrape it flush with the studs. __________________ my next rig will be on the trail before zuk 2.0 will

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode