My new Toy

kyrel69 · 07-27-2017, 09:40 PM

Just got this last week some of you might know this rig

kyrel69 · 07-27-2017, 09:41 PM

more pic

Runoveru2 · 07-27-2017, 11:21 PM

That's tool man Tim's old Rig !!

WrenchMonkey · 07-28-2017, 12:18 AM

Sure is. I knew he traded it for a RZR, but that was months ago. Guess it's been passed around...

kyrel69 · 07-28-2017, 07:23 AM

Quote:

Originally Posted by Runoveru2

That's tool man Tim's old Rig !!

Yes it is Tim old rig

Quote:

Originally Posted by WrenchMonkey

Sure is. I knew he traded it for a RZR, but that was months ago. Guess it's been passed around...

I got it from the guy Tim trade for the RZR

93 Krawler · 07-28-2017, 09:16 AM

Quote:

Originally Posted by kyrel69

I got it from the guy Tim trade for the RZR

Tim took it in the ass on that trade. That rzr is a ragged out piece of junk. I hope you made out better than he did...

Looks like the only change was the tires and wheels. What size are they now?

kyrel69 · 07-28-2017, 09:55 AM

Quote:

Originally Posted by 93 Krawler

Tim took it in the ass on that trade. That rzr is a ragged out piece of junk. I hope you made out better than he did...

Looks like the only change was the tires and wheels. What size are they now?

I traded him a jeep on tons and we keep our tires. I have a set of 44 tsl to put on it but I have to make the beadlocks for them still.

The tires on it are 38's right now. They look small on there

93 Krawler · 07-28-2017, 11:23 AM

His 39.5's looked small too. 44's will look good. I don't think the rear axles will handle them. The dana 70 has an odd spline count. 17 I believe

Sent from my SM-G930V using Tapatalk

kyrel69 · 07-28-2017, 12:09 PM

Quote:

Originally Posted by 93 Krawler

His 39.5's looked small too. 44's will look good. I don't think the rear axles will handle them. The dana 70 has an odd spline count. 17 I believe

Sent from my SM-G930V using Tapatalk

well guess I will run it till it breaks. and replace it with a 14bolt later.

I was told the axles have 488 gears, is that true?

93 Krawler · 07-28-2017, 01:27 PM

Yes, it has 4.88's. I was looking in to changing the carrier to a newer 35 spline so you could get cromo axles.

Sent from my SM-G930V using Tapatalk

kyrel69 · 07-28-2017, 03:11 PM

Quote:

Originally Posted by 93 Krawler

Yes, it has 4.88's. I was looking in to changing the carrier to a newer 35 spline so you could get cromo axles.

Sent from my SM-G930V using Tapatalk

ok thanks for the info

want to get together with you guys and go wheeling again,,,,, I had to miss Day at the farm to take my boy to Boy Scout camp again this year

93 Krawler · 07-28-2017, 04:26 PM

Quote:

Originally Posted by kyrel69

ok thanks for the info

want to get together with you guys and go wheeling again,,,,, I had to miss Day at the farm to take my boy to Boy Scout camp again this year

Join us in harlan next weekend.

Sent from my SM-G930V using Tapatalk

kyrel69 · 07-28-2017, 05:42 PM

Quote:

Originally Posted by 93 Krawler

Join us in harlan next weekend.

Sent from my SM-G930V using Tapatalk

I would love to but I have to work on the 6th :(

I will watch for you next ride and try to make that one

WrenchMonkey · 07-29-2017, 12:31 AM

Next big one is Rush on Labor Day weekend.

kyrel69 · 03-04-2018, 11:21 AM

New shoes

Sent from my SM-G955U using Tapatalk

93 Krawler · 03-04-2018, 05:11 PM

Quote:

Originally Posted by kyrel69

New shoes

Sent from my SM-G955U using Tapatalk

What size?

Sent from my SM-G930V using Tapatalk

WrenchMonkey · 03-04-2018, 05:29 PM

Quote:

Originally Posted by 93 krawler

what size?

huge!

kyrel69 · 03-04-2018, 06:53 PM

Quote:

Originally Posted by 93 Krawler

What size?

Sent from my SM-G930V using Tapatalk

44

Sent from my SM-G955U using Tapatalk

kyrel69 · 03-04-2018, 06:55 PM

Got them on. They are big. Thing I am going to be e to clearance the front cab mount a little. Had to change the front brakes so I could fit the 15in rims on it

Sent from my SM-G955U using Tapatalk

93 Krawler · 03-05-2018, 09:34 AM

Quote:

Originally Posted by kyrel69

44

Sent from my SM-G955U using Tapatalk

Those will look good on there. Did you change the rear axle yet? The Dana 70 didn't like the 39.5's

Sent from my SM-G930V using Tapatalk

kyrel69 · 03-05-2018, 09:37 AM

Quote:

Originally Posted by 93 Krawler

Those will look good on there. Did you change the rear axle yet? The Dana 70 didn't like the 39.5's

Sent from my SM-G930V using Tapatalk

No I have not changed it yet. I guess I will see how it holds up. Try to take it easy on it.

Did it ever brake with the 39?

Sent from my SM-G955U using Tapatalk

blazerbrad · 03-05-2018, 04:52 PM

I wonder what the cost of upgrading the D70 carrier and buying new shafts is compared to slapping in a 14-bolt with 4.88 gears?

kyrel69 · 03-05-2018, 06:11 PM

Quote:

Originally Posted by Waffle

I seem to recall it breaking a shaft before. What you have is the older coarse 23 spline d70. Think these have 1.5" shafts but they neck down pretty far. Something like 1.2". The trick is knowing whether you have a .5" offset carrier or not as I think this makes a big difference when trying to put the bigger 35spline stuff in, source parts, and have it all line up correctly.

Quote:

Originally Posted by blazerbrad

I wonder what the cost of upgrading the D70 carrier and buying new shafts is compared to slapping in a 14-bolt with 4.88 gears?

well I will have to try to figure out what carrier is in it so I know what parts to look for. I have a friend that has some dana 70 parts but who know if they will fit or now

As for the cost. Well I looked last night and the cheapest 14 bolt axle I found uses was 250 and the cheapest 488 gear for about 185 shipped. So I am going to be on the look out for both and hope that the 70 holds till then.

scotty85 · 03-05-2018, 06:34 PM

Looks good sir.

Sent from my HTC 10 using Tapatalk

kyrel69 · 03-06-2018, 11:11 AM

any of you guys know if that rear is a 2 part carrier or not?

07-27-2017, 09:40 PM	#1
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	My new Toy Just got this last week some of you might know this rig Attached Thumbnails

07-27-2017, 09:41 PM	#2
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	more pic Attached Thumbnails

07-27-2017, 11:21 PM	#3
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	That's tool man Tim's old Rig !! __________________ No need for a Winch...You just have to make it !!

07-28-2017, 12:18 AM	#4
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Sure is. I knew he traded it for a RZR, but that was months ago. Guess it's been passed around... __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

07-29-2017, 12:31 AM	#14
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Next big one is Rush on Labor Day weekend. __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

07-28-2017, 11:23 AM	#8
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	His 39.5's looked small too. 44's will look good. I don't think the rear axles will handle them. The dana 70 has an odd spline count. 17 I believe Sent from my SM-G930V using Tapatalk

07-28-2017, 01:27 PM	#10
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Yes, it has 4.88's. I was looking in to changing the carrier to a newer 35 spline so you could get cromo axles. Sent from my SM-G930V using Tapatalk

03-04-2018, 11:21 AM	#15
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	New shoes Sent from my SM-G955U using Tapatalk

03-04-2018, 06:55 PM	#19
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	Got them on. They are big. Thing I am going to be e to clearance the front cab mount a little. Had to change the front brakes so I could fit the 15in rims on it Sent from my SM-G955U using Tapatalk

03-05-2018, 04:52 PM	#22
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	I wonder what the cost of upgrading the D70 carrier and buying new shafts is compared to slapping in a 14-bolt with 4.88 gears?

03-05-2018, 06:34 PM	#24
scotty85 build it,not buy it! Join Date: Jan 2007 Location: dayton,oh Posts: 35	Looks good sir. Sent from my HTC 10 using Tapatalk __________________ scotty 85 grand wagoneer(whats left of it) 77 scout II truggy 84 chevy "home made crewcab" Delightfully Tacky,Yet Unrefined

03-06-2018, 11:11 AM	#25
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	any of you guys know if that rear is a 2 part carrier or not?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode