Harlan Southern Shine 2016

Runoveru2 · 04-19-2016, 12:32 PM

Hope to have my junk finalized and ready to go in the next couple of weeks. This should not be a problem with the help of Kevin and Mark...

This is a awesome trip every year, those who have never been should consider making it, Talked to Ben and he is most likely gonna be ready for this trip also.

Most of us will leave out early Thursday Morning May 26th, at the current moment I'm unable to head out till 4pm on Thursday but hope this will change.

So....Who else is in ?

93 Krawler · 04-19-2016, 02:05 PM

You know I'm in.

bbtank45 · 04-20-2016, 12:17 AM

Shooting to be ready for this trip. Finished up painting this evening. Reassemble, plumb and wire. Rounding third...

bbtank45 · 04-20-2016, 12:19 AM

Just before paint..

Runoveru2 · 04-20-2016, 01:29 AM

Looks awesome, can't wait to see it finished, don't let a few things keep ya from not making it, you need help let us know.

bbtank45 · 04-20-2016, 03:22 PM

Thanks Mark and Jim.

Yeah, they're 47" LTB's....big ol' non-sticky bastards

Im definitely the slowest fabricator of all time, but i am starting to feel like this project could be wrapping up soon, finally!

93 Krawler · 04-20-2016, 11:25 PM

Wow, what a huge transformation. Looks sick. Hope you make it to Harlan

beer_goggles_009 · 04-22-2016, 01:37 PM

I'm in, as long as I can get my rig ready in time. Otherwise, Ill be asking for a passenger seat from somebody!

Runoveru2 · 04-22-2016, 06:13 PM

Quote:

Originally Posted by beer_goggles_009

I'm in, as long as I can get my rig ready in time. Otherwise, Ill be asking for a passenger seat from somebody!

What happened to your Rig ?

beer_goggles_009 · 04-24-2016, 08:42 AM

Trans and tcase studs are loose, which requires disassembly of the.suspensions and crossmemmbers. and the bearings on the front axle need to be replaced. But in the middle of moving I'm not sure I can get it done in time.

Sent from my SAMSUNG-SGH-I257 using Tapatalk

Runoveru2 · 05-03-2016, 06:50 PM

Anyone else out there ?

Come on guys...this is a killer run, guaranteed to have a blast, don't pass this up, there is nothing better than being in the woods beating on your rig with your buds.
Nick ?
Robert ?
Rob ?
Chris ?
Brad ?
Tony ?

93 Krawler · 05-03-2016, 08:21 PM

What he said ^^^^^^

Flint · 05-05-2016, 03:53 PM

I would like to make it down to Harlan again but I am fighting a starting issue on the jeep. While it's down I'd love to get a full roll cage on it before summer. I have to have the cage if I am going to try to hang with you guys...

Runoveru2 · 05-05-2016, 06:52 PM

Quote:

Originally Posted by Flint

I would like to make it down to Harlan again but I am fighting a starting issue on the jeep. While it's down I'd love to get a full roll cage on it before summer. I have to have the cage if I am going to try to hang with you guys...

Fix the starter, let's go, we will keep you safe and keep you off of the stuff with the high roll factor.

Runoveru2 · 05-05-2016, 06:56 PM

Quote:

Originally Posted by Waffle

Bbtank45 isnt going. Looks like it's just 3 rigs with a 4th maybe.

I really thought for sure he would make it.

Runoveru2 · 05-06-2016, 09:00 AM

Quote:

Originally Posted by Waffle

Bbtank45 isnt going. Looks like it's just 3 rigs with a 4th maybe.

Talked to Adam a few days ago (Nuts), says he is going and a few rigs with em, not sure when they plan to head down, Also my son and a couple of his friends may come also "This should be interesting "..it's still in the works so we will see.

bbtank45 · 05-06-2016, 09:36 AM

Quote:

Originally Posted by Runoveru2

I really thought for sure he would make it.

Me too....im putting her together. I will be wheeling this summer, just not in time for Harlan

Drivermod · 05-20-2016, 07:02 PM

I'll be down there with a group of guys from Louisville and a few buggies. I'm sure we will run into each other.

93 Krawler · 05-20-2016, 07:25 PM

Freakin rain

93 Krawler · 05-22-2016, 08:51 PM

Come on Thursday...

10 day https://weather.com/weather/tenday/l/USKY0881:1:US

93 Krawler · 05-24-2016, 07:25 PM

Quote:

Originally Posted by Waffle

The closer we get the drier the weather forcast!

Runoveru2 · 05-24-2016, 07:36 PM

Runoveru2 · 05-28-2016, 08:34 AM

An idea of how the first day started off

Runoveru2 · 05-29-2016, 11:26 AM

And on the first day my rig wanted to take a nap ? Gotta figure out a way to stop that nonsense. We have alot of wheeling to get in !!!

Runoveru2 · 05-29-2016, 11:29 AM

I have bout 250 pictures I have to look through for this trip, will post up when I sort em out.

04-19-2016, 12:32 PM	#1
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	Harlan Southern Shine 2016 Hope to have my junk finalized and ready to go in the next couple of weeks. This should not be a problem with the help of Kevin and Mark... This is a awesome trip every year, those who have never been should consider making it, Talked to Ben and he is most likely gonna be ready for this trip also. Most of us will leave out early Thursday Morning May 26th, at the current moment I'm unable to head out till 4pm on Thursday but hope this will change. So....Who else is in ? __________________ No need for a Winch...You just have to make it !!

04-20-2016, 12:17 AM	#3
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	Shooting to be ready for this trip. Finished up painting this evening. Reassemble, plumb and wire. Rounding third... __________________ 1985 4runner "Redneck Gigalo"

04-20-2016, 12:19 AM	#4
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	Just before paint.. __________________ 1985 4runner "Redneck Gigalo"

04-20-2016, 01:29 AM	#5
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	Looks awesome, can't wait to see it finished, don't let a few things keep ya from not making it, you need help let us know. __________________ No need for a Winch...You just have to make it !!

04-20-2016, 03:22 PM	#6
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	Thanks Mark and Jim. Yeah, they're 47" LTB's....big ol' non-sticky bastards Im definitely the slowest fabricator of all time, but i am starting to feel like this project could be wrapping up soon, finally! __________________ 1985 4runner "Redneck Gigalo"

04-19-2016, 02:05 PM	#2
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	You know I'm in.

04-20-2016, 11:25 PM	#7
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Wow, what a huge transformation. Looks sick. Hope you make it to Harlan

04-22-2016, 01:37 PM	#8
beer_goggles_009 - CORE Member - Join Date: Apr 2011 Location: Mt Washington Posts: 188	I'm in, as long as I can get my rig ready in time. Otherwise, Ill be asking for a passenger seat from somebody!

04-24-2016, 08:42 AM	#10
beer_goggles_009 - CORE Member - Join Date: Apr 2011 Location: Mt Washington Posts: 188	Trans and tcase studs are loose, which requires disassembly of the.suspensions and crossmemmbers. and the bearings on the front axle need to be replaced. But in the middle of moving I'm not sure I can get it done in time. Sent from my SAMSUNG-SGH-I257 using Tapatalk

05-03-2016, 06:50 PM	#11
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	Anyone else out there ? Come on guys...this is a killer run, guaranteed to have a blast, don't pass this up, there is nothing better than being in the woods beating on your rig with your buds. Nick ? Robert ? Rob ? Chris ? Brad ? Tony ? __________________ No need for a Winch...You just have to make it !!

05-03-2016, 08:21 PM	#12
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	What he said ^^^^^^

05-05-2016, 03:53 PM	#13
Flint Join Date: Jan 2014 Posts: 86	I would like to make it down to Harlan again but I am fighting a starting issue on the jeep. While it's down I'd love to get a full roll cage on it before summer. I have to have the cage if I am going to try to hang with you guys... __________________ Facta, non Verba. 2001 Wrangler 2000 Wrangler TJ 1967 CJ5A 2004 Tow rig

05-20-2016, 07:02 PM	#18
Drivermod Join Date: May 2009 Location: Union, KY Posts: 225	I'll be down there with a group of guys from Louisville and a few buggies. I'm sure we will run into each other. __________________ Ian 06 Toyota 4Runner

05-20-2016, 07:25 PM	#19
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Freakin rain

05-22-2016, 08:51 PM	#20
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Come on Thursday... 10 day https://weather.com/weather/tenday/l/USKY0881:1:US

05-24-2016, 07:36 PM	#22
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	__________________ No need for a Winch...You just have to make it !!

05-28-2016, 08:34 AM	#23
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	An idea of how the first day started off Attached Thumbnails __________________ No need for a Winch...You just have to make it !!

05-29-2016, 11:26 AM	#24
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	And on the first day my rig wanted to take a nap ? Gotta figure out a way to stop that nonsense. We have alot of wheeling to get in !!! Attached Thumbnails __________________ No need for a Winch...You just have to make it !!

05-29-2016, 11:29 AM	#25
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	I have bout 250 pictures I have to look through for this trip, will post up when I sort em out. __________________ No need for a Winch...You just have to make it !!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode