CORE Sweatshirts

tjjeepjeep · 11-12-2007, 07:35 AM

Hey everyone. Some of you may have seen the post in the Vendor area on sweatshirts. I was thinking a black hoodie with the logo below on the shirtpocket. (Thanks Carwash for the logo.) Trying to gauge interest in it to determine the final cost (as it will vary some depending on the number of shirts). However so you can plan, lets say they'll cost us $30 a shirt. Post up if you're interested (size(s) too and we'll use this as the order) and I can work with Jason/TrooperII on details. Any questions or suggestions, etc, just let me know.

If you'd rather see the logo across the entire front, let me know. I'm open to suggestions on what everyone wants to see.

94Dodge Truggy · 11-12-2007, 10:43 AM

How about the logo on the sleeves and another different logo on the back too?

TrooperII · 11-12-2007, 11:18 AM

this is what I was thinking, with it going all the way across the chest..

tjjeepjeep · 11-12-2007, 11:31 AM

I kind of like this one with just CORE (no text underneath and no shadowing) going across the chest..

KargoMaster · 11-12-2007, 12:12 PM

I like Trooper II's version... CORE seems easier to read... slightly "vectorized" tread is nice touch... and it will keep folks from asking what CORE stands for...

??possible variation...??
Orange "C.O.R.E." and black bubble with "Cincinnati Off-Road Enthusiasts" large and center front of chest, and then the white bogger (or IROK, but that's a WHOLE different discussion) tread ONLY down the sleaves??

count me in for a large! However we end up... Thanks Lisa and Jason!!

Stang849 · 11-12-2007, 12:27 PM

??possible variation...??
Orange "C.O.R.E." and black bubble with "Cincinnati Off-Road Enthusiasts" large and center front of chest, and white bogger (or IROK, but that's a WHOLE different discussion) tread down the sleaves??

I like this idea, but with out the bogger track going through the letters on the front, just use then down the sleeve

KargoMaster · 11-12-2007, 12:29 PM

Yes, forgive me, my description was not great... so I've edited slightly...

Tread on the sleaves only was my intention.

But again, this is a possible variation... not sure what everyone might think of it.
(or if Jason's Ok with some printing on the sleeve, even??)

tjjeepjeep · 11-12-2007, 12:55 PM

Great ideas. Keep them coming. Sleeve was a viable option. And I'll work on the graphics and post up as I can.

94Dodge Truggy · 11-12-2007, 12:57 PM

How about a TSL swamper pattern? :p My 2 cents

tjjeepjeep · 11-12-2007, 01:23 PM

Quote:

Originally Posted by 94Dodge Truggy

How about a TSL swamper pattern? :p My 2 cents

I'd ask if you have one to send me or post...but then I realized who I was talking to.

KargoMaster · 11-12-2007, 03:24 PM

This is why I said that the tread pattern of choice was a different discussion...

I just think that the white "tread" down the black hoodie arm would be a nice contrast...

I'll help as much as I can, JeepJeep... I like the direction that Jason is heading...

jfiscus · 11-12-2007, 03:41 PM

Can I add an idea?
I may be way off-base, but I had a few free minutes.
I also do not have the CORE font or logo art, so I just used something kinda similar.

Treefrogsw · 11-12-2007, 03:51 PM

I would love a sweat shirt. I don't care on design. I am easy, just ask my wife.

Anyway good ideas. Excited to see what pans out.

94Dodge Truggy · 11-12-2007, 04:14 PM

Quote:

Originally Posted by jfiscus

Can I add an idea?
I may be way off-base, but I had a few free minutes.
I also do not have the CORE font or logo art, so I just used something kinda similar.

This makes my eyes hurt!

KargoMaster · 11-12-2007, 05:03 PM

I love the wrenches, saw blade, screwdriver handles, and stuff that can be identified... but the vectorization artifacts, and the extra "squiggles" and things make it a little busy... (this is what Scott meant too)

I would think that from a distance it may look as though Johnny Knoxville took aim with the paintball gun... which could be cool, but I'm leaning toward simplicity... (personal preference, but I do think this is sweet)

tjjeepjeep · 11-12-2007, 05:08 PM

I'd agree. Cool from a detail perspective but am afraid it wouldn't translate well to a shirt design as it would appear too busy.

KargoMaster · 11-12-2007, 06:18 PM

Here's some options...

I'm kinda diggin' 4... JFiscus' one... some of the others are not doing anything for me in the least...

8 would be awesome if we could get tread alllllllll the way around...

carwash · 11-12-2007, 06:23 PM

#1

Hybrid · 11-12-2007, 06:31 PM

I really like #5 or #8

drmeece · 11-12-2007, 08:10 PM

5

94Dodge Truggy · 11-12-2007, 09:12 PM

8 or 5 is the best. Swamper TSL tracks on the back? Hey jfiscus if the image is toned down just a bit it would be the best I believe. But my opinion is a bit warped. ;)

TrooperII · 11-12-2007, 09:43 PM

sadly enough I kind of like 7. :confused:

JasonCJ7 · 11-12-2007, 11:04 PM

My personal vote would be for 3B. Do we have an official cost of these sweatshirts???

hardluck · 11-12-2007, 11:21 PM

i like both of the 3's

KargoMaster · 11-12-2007, 11:29 PM

Trooper II... I was trying to be as accurate as possible when representing these images on the shirts... I tried not to do things that weren't possible... I'm assuming that the silkscreen can't really go over a seam or a front pocket?? (or for that matter all the way around a shirt except maybe a front and back image that was close to the edges.)

Let me know if there's anything that you see that isn't possible or seems dumb.

Things like, if we did #5, could we customize the sleeves for "our" tires... (assume Bogger/IROK/TSL are requested in equal parts, I guess)
If I gave you vector files (asuming that would be easiest) for each...would that blow our budget? How close to the shoulders can we get the image, and whatnot.

11-12-2007, 11:18 AM	#3
TrooperII Isuzu's in the house Join Date: Feb 2007 Location: Franklin, ohio Posts: 60	this is what I was thinking, with it going all the way across the chest.. Attached Thumbnails __________________ 03 Frontier Crewy (yeah) 85 Trooper lifted\caged and ragged top 89 Trooper RS (really short) x2 www.nightcrawlers4x4.com www.testtubegraphics.com

11-12-2007, 11:31 AM	#4
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	I kind of like this one with just CORE (no text underneath and no shadowing) going across the chest.. Attached Thumbnails

11-12-2007, 12:29 PM	#7
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	Yes, forgive me, my description was not great... so I've edited slightly... Tread on the sleaves only was my intention. But again, this is a possible variation... not sure what everyone might think of it. (or if Jason's Ok with some printing on the sleeve, even??) __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway... Last edited by KargoMaster; 11-12-2007 at 06:20 PM.

11-12-2007, 03:24 PM	#11
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	This is why I said that the tread pattern of choice was a different discussion... I just think that the white "tread" down the black hoodie arm would be a nice contrast... I'll help as much as I can, JeepJeep... I like the direction that Jason is heading... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

11-12-2007, 03:41 PM	#12
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	Can I add an idea? I may be way off-base, but I had a few free minutes. I also do not have the CORE font or logo art, so I just used something kinda similar. Last edited by jfiscus; 11-12-2007 at 03:57 PM. Reason: updated image

11-12-2007, 07:35 AM	#1
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	CORE Sweatshirts Hey everyone. Some of you may have seen the post in the Vendor area on sweatshirts. I was thinking a black hoodie with the logo below on the shirtpocket. (Thanks Carwash for the logo.) Trying to gauge interest in it to determine the final cost (as it will vary some depending on the number of shirts). However so you can plan, lets say they'll cost us $30 a shirt. Post up if you're interested (size(s) too and we'll use this as the order) and I can work with Jason/TrooperII on details. Any questions or suggestions, etc, just let me know. If you'd rather see the logo across the entire front, let me know. I'm open to suggestions on what everyone wants to see. Attached Thumbnails Last edited by tjjeepjeep; 11-12-2007 at 09:38 AM. Reason: logo placement

11-12-2007, 10:43 AM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	How about the logo on the sleeves and another different logo on the back too?

11-12-2007, 12:12 PM	#5
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	I like Trooper II's version... CORE seems easier to read... slightly "vectorized" tread is nice touch... and it will keep folks from asking what CORE stands for... ??possible variation...?? Orange "C.O.R.E." and black bubble with "Cincinnati Off-Road Enthusiasts" large and center front of chest, and then the white bogger (or IROK, but that's a WHOLE different discussion) tread ONLY down the sleaves?? count me in for a large! However we end up... Thanks Lisa and Jason!! __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway... Last edited by KargoMaster; 11-12-2007 at 12:33 PM. Reason: improved description...

11-12-2007, 12:27 PM	#6
Stang849 Stinkin Bastige Join Date: Aug 2007 Location: Anderson Twp. Posts: 178 Images: 236	??possible variation...?? Orange "C.O.R.E." and black bubble with "Cincinnati Off-Road Enthusiasts" large and center front of chest, and white bogger (or IROK, but that's a WHOLE different discussion) tread down the sleaves?? I like this idea, but with out the bogger track going through the letters on the front, just use then down the sleeve

11-12-2007, 12:55 PM	#8
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	Great ideas. Keep them coming. Sleeve was a viable option. And I'll work on the graphics and post up as I can.

11-12-2007, 12:57 PM	#9
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	How about a TSL swamper pattern? :p My 2 cents

11-12-2007, 03:51 PM	#13
Treefrogsw Join Date: Jan 2007 Location: Trenton , Oh Posts: 31	sweat shirt I would love a sweat shirt. I don't care on design. I am easy, just ask my wife. Anyway good ideas. Excited to see what pans out.

11-12-2007, 05:03 PM	#15
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	I love the wrenches, saw blade, screwdriver handles, and stuff that can be identified... but the vectorization artifacts, and the extra "squiggles" and things make it a little busy... (this is what Scott meant too) I would think that from a distance it may look as though Johnny Knoxville took aim with the paintball gun... which could be cool, but I'm leaning toward simplicity... (personal preference, but I do think this is sweet) __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

11-12-2007, 05:08 PM	#16
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	I'd agree. Cool from a detail perspective but am afraid it wouldn't translate well to a shirt design as it would appear too busy.

11-12-2007, 06:18 PM	#17
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	Here's some options... I'm kinda diggin' 4... JFiscus' one... some of the others are not doing anything for me in the least... 8 would be awesome if we could get tread alllllllll the way around... Attached Images __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

11-12-2007, 06:23 PM	#18
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	#1 __________________

11-12-2007, 06:31 PM	#19
Hybrid Join Date: Mar 2007 Location: Fairfield, OH Posts: 134	I really like #5 or #8 __________________ '84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage

11-12-2007, 08:10 PM	#20
drmeece Join Date: Apr 2007 Location: Amelia Ohio Posts: 136	5 __________________ I got a jeep

11-12-2007, 09:12 PM	#21
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	8 or 5 is the best. Swamper TSL tracks on the back? Hey jfiscus if the image is toned down just a bit it would be the best I believe. But my opinion is a bit warped. ;) Last edited by 94Dodge Truggy; 11-12-2007 at 09:57 PM. Reason: Cuz

11-12-2007, 09:43 PM	#22
TrooperII Isuzu's in the house Join Date: Feb 2007 Location: Franklin, ohio Posts: 60	sadly enough I kind of like 7. :confused: __________________ 03 Frontier Crewy (yeah) 85 Trooper lifted\caged and ragged top 89 Trooper RS (really short) x2 www.nightcrawlers4x4.com www.testtubegraphics.com

11-12-2007, 11:04 PM	#23
JasonCJ7 Throttle Jockey Join Date: Jan 2007 Location: Liberty Twp., Ohio Posts: 182	My personal vote would be for 3B. Do we have an official cost of these sweatshirts??? __________________ 78 CJ-7, 350 V8, T-18a Tranny, Twin Stick Dana 300, Scout 44's, 4.27 Gears, 36" TSL's, Welded rear and Full Spool Front, Hi-Steer with GM Knuckles

11-12-2007, 11:21 PM	#24
hardluck Poor Bastard Join Date: Jan 2007 Location: Lynchburg, OH Posts: 189	i like both of the 3's __________________ if you can't fit it....FORCE IT!!!!!!!!!

11-12-2007, 11:29 PM	#25
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	Trooper II... I was trying to be as accurate as possible when representing these images on the shirts... I tried not to do things that weren't possible... I'm assuming that the silkscreen can't really go over a seam or a front pocket?? (or for that matter all the way around a shirt except maybe a front and back image that was close to the edges.) Let me know if there's anything that you see that isn't possible or seems dumb. Things like, if we did #5, could we customize the sleeves for "our" tires... (assume Bogger/IROK/TSL are requested in equal parts, I guess) If I gave you vector files (asuming that would be easiest) for each...would that blow our budget? How close to the shoulders can we get the image, and whatnot. __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode