pay for help

SixFtUnd · 03-09-2008, 07:11 PM

Thinking about paying someone to help me with my truck
if anyone has time and would like to make a few bucks
can't pay much though
I want help doing jobs not jobs done becouse I want to learn as I go
well if anyone may be enterested let me know
like I said I can't pay alot

you can give me a call at 471-2617
thanks

4RunnerAdam · 03-09-2008, 08:00 PM

What truck and whats wrong with it

SixFtUnd · 03-09-2008, 08:09 PM

86 bronco
I just got done trying to replace the u-joing on the front left axil with no luck :(

JET455 · 03-10-2008, 11:10 AM

It cost more if you help.....:p

4RunnerAdam · 03-10-2008, 05:35 PM

Your best bet is to take the shaft with the new ujoint into a shop and ask them to put it on for you. I've done that and paid $25 or so.

If you cant find a a shop to help, and if your close by, bring it to me. I'll take it to work and use a press to install it. I'll charge you $25 if you bring me the shaft and new ujoint.

SixFtUnd · 03-10-2008, 09:58 PM

can't get the shaft out I don't think the u joint will be a problem

jfiscus · 03-11-2008, 12:29 PM

Is it a c-clip shaft?
What else would be holding it?
Do you have the hub off yet?

SixFtUnd · 03-11-2008, 01:22 PM

don't know anything about a c-clip
thats probably what it is

eighty3bronco · 03-11-2008, 03:17 PM

Since it is the front there is not a clip. Passenger side if it has never been removed can be a PITA. There is a slip yoke that won't lt go. Your best bet is to make sure it is good and set on some jack stands and use a long spud bar and put alot of pressure on it. Eventually it will come out. It took a friend of mine and me about an hour of prying to get it out. The drivers side should come out without much issue. It is just the hub that holds it in place.

94Dodge Truggy · 03-11-2008, 03:36 PM

Duct tape a 1/4 stick of some explosive material and ignite. That hopefully will loosen it up and make it easier for ya and will be entertaining at the same time. Where do you live? I may be able to come over and help.

SixFtUnd · 03-11-2008, 06:01 PM

Price Hill

truck is still running fine
I could come to you also

03-09-2008, 07:11 PM	#1
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	pay for help Thinking about paying someone to help me with my truck if anyone has time and would like to make a few bucks can't pay much though I want help doing jobs not jobs done becouse I want to learn as I go well if anyone may be enterested let me know like I said I can't pay alot you can give me a call at 471-2617 thanks

03-10-2008, 11:10 AM	#4
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	It cost more if you help.....:p __________________ if i am not currently offending you, i will be shortly.

03-11-2008, 03:17 PM	#9
eighty3bronco anywhere but there Join Date: Jan 2007 Location: Blanchester, Oh Posts: 174	Since it is the front there is not a clip. Passenger side if it has never been removed can be a PITA. There is a slip yoke that won't lt go. Your best bet is to make sure it is good and set on some jack stands and use a long spud bar and put alot of pressure on it. Eventually it will come out. It took a friend of mine and me about an hour of prying to get it out. The drivers side should come out without much issue. It is just the hub that holds it in place. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-09-2008, 08:00 PM	#2
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	What truck and whats wrong with it

03-09-2008, 08:09 PM	#3
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	86 bronco I just got done trying to replace the u-joing on the front left axil with no luck :(

03-10-2008, 05:35 PM	#5
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	Your best bet is to take the shaft with the new ujoint into a shop and ask them to put it on for you. I've done that and paid $25 or so. If you cant find a a shop to help, and if your close by, bring it to me. I'll take it to work and use a press to install it. I'll charge you $25 if you bring me the shaft and new ujoint.

03-10-2008, 09:58 PM	#6
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	can't get the shaft out I don't think the u joint will be a problem

03-11-2008, 12:29 PM	#7
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	Is it a c-clip shaft? What else would be holding it? Do you have the hub off yet?

03-11-2008, 01:22 PM	#8
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	don't know anything about a c-clip thats probably what it is

03-11-2008, 03:36 PM	#10
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Duct tape a 1/4 stick of some explosive material and ignite. That hopefully will loosen it up and make it easier for ya and will be entertaining at the same time. Where do you live? I may be able to come over and help.

03-11-2008, 06:01 PM	#11
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	Price Hill truck is still running fine I could come to you also