04-13-2008, 08:58 PM
|
#1 |
Join Date: Nov 2007
Location: Sidney, Ohio
Posts: 52
|
winch mount measurements
I plan on making my own winch mounting plate for my MileMarker se9500c. Could anyone get me some measurements from their's so I have somewhere to start? Thanks. I know the bolt pattern but am interested in overall height, width, etc...
BiggDaddy |
|
|
|
04-14-2008, 08:31 AM
|
#2 |
|
EX-Vice President
Join Date: Jan 2007
Location: Fairfield, Ohio
Posts: 3,048
 |
Check on ebay for some measurements. I have found measurements there before. The 9500 warn is 4.5'' by 10'' bolt pattern.
__________________
|
|
|
|
|
04-14-2008, 11:59 PM
|
#4 |
Join Date: Feb 2008
Location: middletown,oh
Posts: 508
|
You could just measure the winch:confused:
|
|
|
|
|
04-15-2008, 12:33 AM
|
#5 |
|
Your wifes pimp!
Join Date: Jan 2007
Location: Everywhere!!!!!!
Posts: 548
 |
SE9500C (76-50246) Technical Dimensions
__________________
   if i am not currently offending you, i will be shortly. |
|
|
|
|
04-15-2008, 12:39 AM
|
#6 |
|
Your wifes pimp!
Join Date: Jan 2007
Location: Everywhere!!!!!!
Posts: 548
|
If you really need to build your own winch mount? But this would do the trick and save a lot of time. Or just run over to Harbor Frieght and pick up one.
http://www.truckspring.com/mile-mark...-50-87283.html
__________________
if i am not currently offending you, i will be shortly. |
|
|
|
|
04-16-2008, 11:20 AM
|
#7 |
|
Join Date: Nov 2007
Location: Sidney, Ohio
Posts: 52
|
more time than $$
Thanks guys. I've got more time than money right now, and a bit of steel laying around also. So I'm gonna see what I can come up with. I'll let you see some pics when I get done.
BiggDaddy |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
