welding

SixFtUnd · 09-25-2009, 01:10 PM

can someone check out a welder I bought at the flea market
and maybe give me a quick welding lessen let me know what I can and can't do with it
I can bring it to you or you can come here

I know nothing about welding but it's a 110v craftsman wire fed welder

I was able to get two peices of metal to hold together so it works a little anyway

superjeep · 09-25-2009, 01:47 PM

Does it have reference chart for thick. Should have amp/wirefeed this is a good start. biggest thing is to clean the metal extremly good for a good clean weld.I am guessing it is flux core wire so make sure you have the right wire.

check the torch for wear and replace tips as needed this will also cause welding problems and keep the torch in straight as possible position for the weld this to will cause weld problems.

have fun, practice alought and stay safe.

Shawn

jeeptech77 · 09-25-2009, 02:14 PM

hi danny i wanted to know what type of craftsman welder you bought .
is it a professional series ?
is it a flux core welder?

KennyTJ · 09-25-2009, 03:56 PM

Hey Danny, my boy Josh is an certified welder. He can come over and give you some tips. Shoot me a PM.

Coppertop · 09-25-2009, 04:30 PM

Since we got rained out tomorrow. I'll be home in the garage.. Shoot me a pm if you still need someone to check it out and give you some lessons..

I got you benefit dvd as well.

Nick

SixFtUnd · 09-25-2009, 07:38 PM

here are some pics

Coppertop · 09-25-2009, 10:33 PM

Looks good.. lets weld!! Danny, I'll give you a call saturday .

Nick

09-25-2009, 01:10 PM	#1
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	welding can someone check out a welder I bought at the flea market and maybe give me a quick welding lessen let me know what I can and can't do with it I can bring it to you or you can come here I know nothing about welding but it's a 110v craftsman wire fed welder I was able to get two peices of metal to hold together so it works a little anyway __________________ 86 Ford Bronco

09-25-2009, 02:14 PM	#3
jeeptech77 jeeptech77 Join Date: Aug 2007 Location: cincinnati Posts: 12	welding hi danny i wanted to know what type of craftsman welder you bought . is it a professional series ? is it a flux core welder?

09-25-2009, 04:30 PM	#5
Coppertop XJWHEELING Join Date: Nov 2007 Location: Colerain Township Posts: 837	Since we got rained out tomorrow. I'll be home in the garage.. Shoot me a pm if you still need someone to check it out and give you some lessons.. I got you benefit dvd as well. Nick __________________ Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille .. Last edited by Coppertop; 09-25-2009 at 10:29 PM.

09-25-2009, 07:38 PM	#6
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	here are some pics __________________ 86 Ford Bronco

09-25-2009, 10:33 PM	#7
Coppertop XJWHEELING Join Date: Nov 2007 Location: Colerain Township Posts: 837	Looks good.. lets weld!! Danny, I'll give you a call saturday . Nick __________________ Just a 200 dollar cherokee that wouldn't start .. Ten years later same chrome grille ..

09-25-2009, 01:47 PM	#2
superjeep Join Date: Jan 2007 Posts: 88	Does it have reference chart for thick. Should have amp/wirefeed this is a good start. biggest thing is to clean the metal extremly good for a good clean weld.I am guessing it is flux core wire so make sure you have the right wire. check the torch for wear and replace tips as needed this will also cause welding problems and keep the torch in straight as possible position for the weld this to will cause weld problems. have fun, practice alought and stay safe. Shawn

09-25-2009, 03:56 PM	#4
KennyTJ The Pirate Join Date: Oct 2007 Location: Lebanon, Oh. Posts: 297	Hey Danny, my boy Josh is an certified welder. He can come over and give you some tips. Shoot me a PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode