How much is my Sammi worth?

[hotrod]

Just as the title says, im wondering how much my samurai is worth.
Stock drive train with custom rear shaft by B&T in milford and locked rear and 31 10.5s. Spring over axle and have the mercedes steering arms for it. Full cage with seats bolted to cage and 2 4 point harnesses. Dove tailed (i have shortened tail gate to fit) with 2 4.5" round LED tail lights, 1/2 doors, and a few other little things here and there. would just like a rough estamate what somebody would really pay for this. Thanks!
Oh, i have the title in my name and is street legal.



The stack is fake... just there for laughs

[rmballou]

idk whats it worth but id like to buy it lol

[hotrod]

Everything is for sale for the right price

[fabricator]

If you are really wanting to sell it
you need to access the price you want to sell it for

It is your unit, you are the only one that knows what you will
take for it

If you are wanting poeple to bid for it I would
suggest ebay .

For the record...from your description
you have a stock sammi on 31's that has a cage
thats it.....
Based on that description I would give no more than 300 for it
which is way less than your thinking I am sure

So in my opinion you need to describe the unit in detail
with plenty of pics, put it in the proper section
and put a price on it
if it is 5 bucks or 5000 bucks , thats the price that you want and it's yours
so price it to where you feel you will take for it to be satisfied
done............

bottom line....you really do have a number in your head as to what you will take for it.....grow a set and share that number with us

[Nuts]

Originally Posted by fabricator

If you are really wanting to sell it
you need to access the price you want to sell it for

It is your unit, you are the only one that knows what you will
take for it

If you are wanting poeple to bid for it I would
suggest ebay .

For the record...from your description
you have a stock sammi on 31's that has a cage
thats it.....
Based on that description I would give no more than 300 for it
which is way less than your thinking I am sure

So in my opinion you need to describe the unit in detail
with plenty of pics, put it in the proper section
and put a price on it
if it is 5 bucks or 5000 bucks , thats the price that you want and it's yours
so price it to where you feel you will take for it to be satisfied
done............

bottom line....you really do have a number in your head as to what you will take for it.....grow a set and share that number with us

X2, It doesn't have a rear floor, looks like at least part of the dash if not all is missing,there are some things that some people may think look goofy(lights in the hood,front bumper with all the little lights and the winsheild is cracked,doesn't apear to sit all the way back in the factory postition or even bolt on) that might keep the price down. What about a top and doors? I'd probably give $500-$700 depending on how it runs.

[Trigger]

IMO, right now, it looks like a project vehicle more than a ready to wheel vehicle. A few hundred dollars could get it from being a $500 project vehicle to a $5,000 wheeler.

[Jordandg]

If you are serious about selling this for some of the prices that others have listed above, ie. 300-700 range let me know, I am in the market for a cheap wheeler and would like to work something out.

[hotrod]

well it isnt officially for sale yet was just trying to get a rough idea. I have done a lot since the pics floor is done and dash is in. I personally hate the lights on the hood also just dont want 2 holes and havent found a good replacement yet. Also i have a winch for it so that front bumper is gone soon. But thanks for the input ive been lookin for yota axles and new windshield for it.

[fabricator]

Originally Posted by hotrod

.................1. I personally hate the lights on the hood also just dont want 2 holes and havent found a good replacement yet. .................................................. .................................................. ..2.been lookin for yota axles

1. Refrigerator magnets should cover the holes well

2. What you got to trade for some Toyota axles

[hotrod]

Originally Posted by fabricator

1. Refrigerator magnets should cover the holes well

2. What you got to trade for some Toyota axles

1. ah good idea, i accually too them off tonight and put a bolt through them with a washer on each side, doesnt look great, but better than the mickey mouse ears haha

2. only thing i have at the moment (vehicle related) is a narrow ratio t19, a 1980 Scout II frame minus axles, and a few samurai axles, none of which anyone wants so im sure thats not any kind of trade you were thinking.
also have a pretty nice 5x8 trailer with a mesh back gate and a new wood deck has a 2" coupler, but i dont have the cirtificate of origin for it. :(

[BiggDaddy]

I have no idea how wide a samurai is, but why don't you put a hi-lift mount where the lights were. Pretty popular among the Jeep folks, and it will fill your holes.

BiggDaddy

[KargoMaster]

Originally Posted by hotrod

...pretty nice 5x8 trailer ...but i dont have the cirtificate of origin for it. :(

Get a wieght slip, take your driver's license, and tell them it's homemade... DONE.




Put up some pics of the updates... might bring more imaginary dollars.
I dig the dovetail and the tailgate...

[hotrod]

Originally Posted by KargoMaster

Get a wieght slip, take your driver's license, and tell them it's homemade... DONE.

I was going do do that got a weight slip and everything, just never made it up to the title office.


Put up some pics of the updates... might bring more imaginary dollars.
I dig the dovetail and the tailgate...

I will here soon, i dont get home from work untill 6 so its always dark :mad:
and thank you