3/16th plate steel

sarge · 02-28-2010, 10:46 AM

anyone need any , I got a deal ( I think ) on 4'x8'+ sheets if there is enough interest I may get a bunch. I'm going to pick some up on Monday , if it is good quality , as in rust and twist free I'll post up prices.

JeffK5 · 02-28-2010, 11:13 AM

I'd be down for one sheet once you get an idea of price... any chance for 1/8"?

How about Aluminium sheet?

Jeff

Hope Springs Hauler · 02-28-2010, 11:15 AM

I could use 1 as well

WrenchMonkey · 02-28-2010, 12:01 PM

Depending on the price, I might...

Thanks!

Robert

KennyTJ · 02-28-2010, 12:58 PM

I would be in for a sheet of 3/16" (or even 7ga.) may be up for 1/8" sheet as well. Let us know what price you can get.

sarge · 02-28-2010, 04:11 PM

can only get the 3/16 , I talked to my guy today and they will be out of the shop until midweek so I will be waiting on him to call me . I will let everyone know as soon as I get the first load. Looks like it's going to run about $100.00 for a full 4'x8' sheet. just a ball park guess , I will confirm when I pick mine up.

KennyTJ · 02-28-2010, 05:28 PM

I assume it's A36 plate and should be about 250lbs. per 4x8 sheet for 3/16". Have to figure how manny strong backs needed to load a sheet in the truck!

carwash · 02-28-2010, 08:07 PM

sarge, count me in....

boomhauer · 02-28-2010, 08:36 PM

i may be interested in a sheet depending on price...thanks

kyrel69 · 02-28-2010, 09:09 PM

I might be in too,, :)

gothodgie · 02-28-2010, 09:13 PM

Sorry gonna have to back out... After my truck dying today i need all the cash i got right now... If it ends up i can do it i'll let you know....
Thanks
Chris

03-01-2010, 01:41 AM

Quote:

Originally Posted by gothodgie

I could probably use 1/2 a sheet

I could use the other half if you wanted to cut a sheet in half

Got any pics?

JET455 · 03-01-2010, 03:10 AM

Quote:

Originally Posted by Brad@TORC

I could use the other half if you wanted to cut a sheet in half

Got any pics?

it looks like this from the side:)

_______________________________________________

03-01-2010, 03:11 AM

Are you sure thats 3/16"? Looks a little thin.

:p

JET455 · 03-01-2010, 03:15 AM

Quote:

Originally Posted by Brad@TORC

Are you sure thats 3/16"? Looks a little thin.

:p

is that better?

________________________________________

carwash · 03-01-2010, 10:17 AM

that doens't look quite like 8'... or 4' for that matter.

WrenchMonkey · 03-01-2010, 11:03 AM

Didn't you see Willy Wonka? When you transmit stuff over the innerweb, it comes out smaller on the other side.

Do I have to explain everything to you people?

Robert

gothodgie · 03-01-2010, 11:53 AM

Quote:

Originally Posted by JET455

it looks like this from the side:)

_______________________________________________

looks good...

sarge · 03-16-2010, 01:20 PM

I'm only going to be able to get about 6 sheets , it is straight , twist and rust free new plate and is 245 lbs.

I will be getting it next week I hope ! I will let everyone know when I get it . I will be bringing it to my house and putting it in the garage to keep it out of the weather . I will not deliver ! the **** is just too heavy to be loading and unloading ...... the cost is $95 a sheet . I have a plasma cutter and can cut a sheet in half if needed for cardboard box with frosty adult beverages inside.

If your in, and want a sheet post up , I will go in order of post.

Sarge

Hope Springs Hauler · 03-16-2010, 01:30 PM

Half sheet

What Brand

sarge · 03-16-2010, 01:52 PM

Quote:

Originally Posted by Hope Springs Hauler

Half sheet

What Brand

I'm a cheap bastard so, Natty light

jfiscus · 03-16-2010, 02:30 PM

on 2nd thought i'll take a whole sheet if available, but can you cut it in half?
My plasma has not made it home yet... :(

kyrel69 · 03-16-2010, 03:41 PM

I will take 1/2 a sheet

comanchedude · 03-16-2010, 04:46 PM

I will take half sheet

JeffK5 · 03-16-2010, 09:37 PM

I'll take a whole uncut sheet.. let me know if you need money before you get the sheets in your possession.

I can tell you that getting money up front is a good idea.. When I was pimping the 1/4" plate I had 20 people "commit" to wanting full and half sheets and when it came time to collect I was left holding the bag. It ended up taking 3 months of re-pimping to clear my garage of 6,000 lbs. of steel

Jeff

02-28-2010, 10:46 AM	#1
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	3/16th plate steel anyone need any , I got a deal ( I think ) on 4'x8'+ sheets if there is enough interest I may get a bunch. I'm going to pick some up on Monday , if it is good quality , as in rust and twist free I'll post up prices.

02-28-2010, 11:15 AM	#3
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	I could use 1 as well __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

02-28-2010, 12:01 PM	#4
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Depending on the price, I might... Thanks! Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

02-28-2010, 08:07 PM	#8
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	sarge, count me in.... __________________

02-28-2010, 08:36 PM	#9
boomhauer Join Date: Mar 2008 Posts: 188	i may be interested in a sheet depending on price...thanks __________________ 95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!!

02-28-2010, 11:13 AM	#2
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	I'd be down for one sheet once you get an idea of price... any chance for 1/8"? How about Aluminium sheet? Jeff

02-28-2010, 12:58 PM	#5
KennyTJ The Pirate Join Date: Oct 2007 Location: Lebanon, Oh. Posts: 297	I would be in for a sheet of 3/16" (or even 7ga.) may be up for 1/8" sheet as well. Let us know what price you can get.

02-28-2010, 04:11 PM	#6
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	can only get the 3/16 , I talked to my guy today and they will be out of the shop until midweek so I will be waiting on him to call me . I will let everyone know as soon as I get the first load. Looks like it's going to run about $100.00 for a full 4'x8' sheet. just a ball park guess , I will confirm when I pick mine up.

02-28-2010, 05:28 PM	#7
KennyTJ The Pirate Join Date: Oct 2007 Location: Lebanon, Oh. Posts: 297	I assume it's A36 plate and should be about 250lbs. per 4x8 sheet for 3/16". Have to figure how manny strong backs needed to load a sheet in the truck!

02-28-2010, 09:09 PM	#10
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	I might be in too,, :)

02-28-2010, 09:13 PM	#11
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	Sorry gonna have to back out... After my truck dying today i need all the cash i got right now... If it ends up i can do it i'll let you know.... Thanks Chris __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired Last edited by gothodgie; 03-16-2010 at 10:49 PM. Reason: truck died

03-01-2010, 03:11 AM	#14
Brad@TORC Guest Posts: n/a	Are you sure thats 3/16"? Looks a little thin. :p

03-01-2010, 10:17 AM	#16
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	that doens't look quite like 8'... or 4' for that matter. __________________

03-01-2010, 11:03 AM	#17
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Didn't you see Willy Wonka? When you transmit stuff over the innerweb, it comes out smaller on the other side. Do I have to explain everything to you people? Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

03-16-2010, 01:20 PM	#19
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	I'm only going to be able to get about 6 sheets , it is straight , twist and rust free new plate and is 245 lbs. I will be getting it next week I hope ! I will let everyone know when I get it . I will be bringing it to my house and putting it in the garage to keep it out of the weather . I will not deliver ! the **** is just too heavy to be loading and unloading ...... the cost is $95 a sheet . I have a plasma cutter and can cut a sheet in half if needed for cardboard box with frosty adult beverages inside. If your in, and want a sheet post up , I will go in order of post. Sarge

03-16-2010, 01:30 PM	#20
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	Half sheet What Brand __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

03-16-2010, 02:30 PM	#22
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	on 2nd thought i'll take a whole sheet if available, but can you cut it in half? My plasma has not made it home yet... :(

03-16-2010, 03:41 PM	#23
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	I will take 1/2 a sheet

03-16-2010, 04:46 PM	#24
comanchedude COMANCHE NUT Join Date: Jan 2007 Location: Ross Twp Posts: 166	I will take half sheet __________________ just don’t get stupid and stick a Chevy engine in your Jeep. Man I hate that

03-16-2010, 09:37 PM	#25
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	I'll take a whole uncut sheet.. let me know if you need money before you get the sheets in your possession. I can tell you that getting money up front is a good idea.. When I was pimping the 1/4" plate I had 20 people "commit" to wanting full and half sheets and when it came time to collect I was left holding the bag. It ended up taking 3 months of re-pimping to clear my garage of 6,000 lbs. of steel Jeff

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode