JB welding plastic tank reliably?

94Dodge Truggy · 04-22-2010, 08:59 PM

I have a 2" wide slit that is on the side of the tank that really leaks badly. Wondering if sanding and preping will work with some JB weld? What are your experiences? Thanks, Scott

fabricator · 04-22-2010, 09:18 PM

factory dodge?
what does it fit

carwash · 04-22-2010, 09:21 PM

drain it and plastic weld it.

there are also epoxies that are made to do what you are doing, specifically for fuel tanks i believe.

Hope Springs Hauler · 04-22-2010, 09:49 PM

I used the fuel tank epoxy. It is resistant to gas and oils. It should last

Waffle · 04-22-2010, 10:27 PM

Harbor Freight has a plastic weld kit. Never used it though.

94Dodge Truggy · 04-23-2010, 06:44 AM

It is on the Polaris RZRs. I had a log rip through the skid and tank. Went through 7 gallons in 5 minutes. Can gas tank epoxy be had at autozone or?

04-22-2010, 08:59 PM	#1
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	JB welding plastic tank reliably? I have a 2" wide slit that is on the side of the tank that really leaks badly. Wondering if sanding and preping will work with some JB weld? What are your experiences? Thanks, Scott __________________

04-22-2010, 09:18 PM	#2
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	factory dodge? what does it fit __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

04-22-2010, 09:21 PM	#3
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	drain it and plastic weld it. there are also epoxies that are made to do what you are doing, specifically for fuel tanks i believe. __________________

04-22-2010, 09:49 PM	#4
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	I used the fuel tank epoxy. It is resistant to gas and oils. It should last __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

04-23-2010, 06:44 AM	#6
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	It is on the Polaris RZRs. I had a log rip through the skid and tank. Went through 7 gallons in 5 minutes. Can gas tank epoxy be had at autozone or? __________________

04-22-2010, 10:27 PM	#5
Waffle Join Date: Aug 2009 Location: . Posts: 75 Images: 10	Harbor Freight has a plastic weld kit. Never used it though.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode