Go Back   C.O.R.E. FORUM > Campfire > Tech and How-To

Reply
 
Thread Tools Display Modes
Old 07-17-2010, 11:53 AM   #1
FollowMyRuts
That Guy
 
FollowMyRuts's Avatar
 
Join Date: Sep 2009
Location: Hamilton OH
Posts: 23
caburated vs fuel injected.

Ill try and make this short. I bought a 350 with a TBI. I'd like to run a fuel injection, cause let's be honest, no one offroads on flat ground. The person I'm building the jeep with (stubborn father) wants to run Carburated because of the throttle response, and easy to operate. Here's my question, do I run fuel injected, or do I spend the money to convert back to caburated? I know Holley has a 4wd carb. And I know with Fuel Injected you have to worry about a wet computer. They both have pro's and con's. Any input is greatly appreciated, thanks!
FollowMyRuts is offline   Reply With Quote
Old 07-17-2010, 01:22 PM   #2
itbrokeagain
Just Empty Every Pocket
- CORE Member -
 
itbrokeagain's Avatar
 
Join Date: Feb 2007
Location: Amelia
Posts: 1,435
Send a message via AIM to itbrokeagain
Throttle response is just as good with injection. Can be harder to work on but ultimately is more reliable in my opinion. I have had my jeep on steep hills and almost over and with out injection would have stalled and would have put me in bad situations. Keep the injection. If you dont you will wish you had.
__________________
91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.
itbrokeagain is offline   Reply With Quote
Old 07-17-2010, 01:27 PM   #3
FollowMyRuts
That Guy
 
FollowMyRuts's Avatar
 
Join Date: Sep 2009
Location: Hamilton OH
Posts: 23
Quote:
Originally Posted by itbrokeagain View Post
Throttle response is just as good with injection. Can be harder to work on but ultimately is more reliable in my opinion. I have had my jeep on steep hills and almost over and with out injection would have stalled and would have put me in bad situations. Keep the injection. If you dont you will wish you had.
That's what I was saying, plus we're going to be running a Comp Cam Thumper cam that's going to make it rev up quicker. Thanks for the advise!
FollowMyRuts is offline   Reply With Quote
Old 07-17-2010, 04:05 PM   #4
Mike F
EFI AMC 360
 
Join Date: Mar 2007
Location: New Lebanon, OH
Posts: 32
Quote:
Originally Posted by FollowMyRuts View Post
That's what I was saying, plus we're going to be running a Comp Cam Thumper cam that's going to make it rev up quicker. Thanks for the advise!
Even the mildest "Thumper" cam for the 89 to 98 Chevy motors says in the install notes "Not for use with EFI applications" and are for originally roller camed morors

Any thing but a very mild cam that affects idle vacuum too much will require major retuning if it could be made to work smoothly at all. I would find a cam meant to work with the TBI.
__________________
89 YJ EFI AMC 360, T18a, D20, built D44, 14 bolt, 38" Creepy Crawlers.
Mike F is offline   Reply With Quote
Old 07-18-2010, 01:22 PM   #5
pfreer3
Old Newb
 
pfreer3's Avatar
 
Join Date: Jun 2009
Location: Independence
Posts: 49
going backwards is stupid, ditch the cam for an RV cam & run an upgaded TBI computer. It will run 10X better off road, and TBI has a huge following. Simple once you learn it.
pfreer3 is offline   Reply With Quote
Old 07-18-2010, 09:55 PM   #6
TomH
Gearhead
 
TomH's Avatar
 
Join Date: Mar 2008
Location: Anderson
Posts: 95
Throttle response in an EFI setup pwns carbs, period. (Even TBI setups.) Add weather and angle to the equation and it's not even close. EFI rules.
TomH is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.