how do i set up my radiator in the rear of my buggy?

Haddix505 · 12-29-2010, 12:56 AM

how do i set up my radiator in the rear of my buggy? Do I got to get a different water pump? Humpy had it in the rear, but he had problems with it. He said when he climbed hills it kept loosing prime and cavitating. Anyone have any info?

Bear Chow · 12-29-2010, 09:13 AM

The ones I've seen did not have an additional pump but did have high flow pumps. Burping all the air out should fix the cavitation. Put the front end into a deep ditch and start bleeding air. As soon as you think you have all the air out your only half way there. As I recall the expansion tank location is one of banes of the problem.

sarge · 12-30-2010, 12:22 PM

I had a standard pump on mine and had no problems at all . You just have to make sure the cap is the highest part of the cooling system. Also make sure that you keep the hoses in the correct flow direction ( upper hose to top and lower hose to bottom ) . I ran pipe along the frame rail with rubber lines at each end. This set up with a Taurus2 speed fan kept my 350 SBC cool even in the hottest conditions.

Haddix505 · 12-30-2010, 02:33 PM

Thank you guys for the info.

twiztedzuki · 01-03-2011, 09:13 PM

Sarge is rite on! took me awhile bleed all air out though

humpy · 01-04-2011, 09:16 AM

Quote:

Originally Posted by sarge

I had a standard pump on mine and had no problems at all . You just have to make sure the cap is the highest part of the cooling system. Also make sure that you keep the hoses in the correct flow direction ( upper hose to top and lower hose to bottom ) . I ran pipe along the frame rail with rubber lines at each end. This set up with a Taurus2 speed fan kept my 350 SBC cool even in the hottest conditions.

sbc pump must be much better than a yota pump...i had all these exactly as you say...the cap was prob 6-8 inches higher than valve cover of motor...system worked great till i started shootin hills...had no t stat in it... a yota water pump is much smaller than a sbc pump...

do you think an electric inline pusher pump would help keep the original pump primed??

Flxratd · 01-04-2011, 10:29 AM

Quote:

Originally Posted by humpy

sbc pump must be much better than a yota pump...i had all these exactly as you say...the cap was prob 6-8 inches higher than valve cover of motor...system worked great till i started shootin hills...had no t stat in it... a yota water pump is much smaller than a sbc pump...

do you think an electric inline pusher pump would help keep the original pump primed??

having no t stat in it will cause an issue also if you dont run at least a restriction plate to slow the coolant down. with no t stat the coolant will run through the radiator faster than it has time to cool. if you want to run without one gut the insides and leave the t stat housing as a restriction

humpy · 01-04-2011, 11:29 AM

i agree with that but it wont cause it to suck air in it and cavitate will it?? cause i tried it both ways...restrictor and none

Flxratd · 01-04-2011, 11:47 AM

Quote:

Originally Posted by humpy

i agree with that but it wont cause it to suck air in it and cavitate will it?? cause i tried it both ways...restrictor and none

nope wouldnt do that

twiztedzuki · 01-04-2011, 05:28 PM

my single seater has tracker motor and it took alot of bleeding air out out system. once I got air out it stays 180. filler neck maybe 10" higher than top motor

Haddix505 · 01-04-2011, 05:40 PM

Im gonna put in the rear next week, so we'll give it a shot. Im running a gutted thermstat.

humpy · 01-04-2011, 05:50 PM

maybe twistedzuki is onto somethin rogi....raise that dude up higher that i had it....maybe thats the problem..

12-29-2010, 12:56 AM	#1
Haddix505 Join Date: Sep 2010 Location: Bethel,oh Posts: 134	how do i set up my radiator in the rear of my buggy? how do i set up my radiator in the rear of my buggy? Do I got to get a different water pump? Humpy had it in the rear, but he had problems with it. He said when he climbed hills it kept loosing prime and cavitating. Anyone have any info? __________________ Jeeps are cute. Barbe drives one.

12-30-2010, 02:33 PM	#4
Haddix505 Join Date: Sep 2010 Location: Bethel,oh Posts: 134	Thank you guys for the info. __________________ Jeeps are cute. Barbe drives one.

01-04-2011, 05:40 PM	#11
Haddix505 Join Date: Sep 2010 Location: Bethel,oh Posts: 134	Im gonna put in the rear next week, so we'll give it a shot. Im running a gutted thermstat. __________________ Jeeps are cute. Barbe drives one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-29-2010, 09:13 AM	#2
Bear Chow Jeepless Join Date: Feb 2007 Location: Oxford, Oh Posts: 302	The ones I've seen did not have an additional pump but did have high flow pumps. Burping all the air out should fix the cavitation. Put the front end into a deep ditch and start bleeding air. As soon as you think you have all the air out your only half way there. As I recall the expansion tank location is one of banes of the problem.

12-30-2010, 12:22 PM	#3
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	I had a standard pump on mine and had no problems at all . You just have to make sure the cap is the highest part of the cooling system. Also make sure that you keep the hoses in the correct flow direction ( upper hose to top and lower hose to bottom ) . I ran pipe along the frame rail with rubber lines at each end. This set up with a Taurus2 speed fan kept my 350 SBC cool even in the hottest conditions.

01-03-2011, 09:13 PM	#5
twiztedzuki Join Date: May 2008 Location: Waverly ohio Posts: 586	Sarge is rite on! took me awhile bleed all air out though

01-04-2011, 11:29 AM	#8
humpy Join Date: Sep 2008 Posts: 573	i agree with that but it wont cause it to suck air in it and cavitate will it?? cause i tried it both ways...restrictor and none

01-04-2011, 05:28 PM	#10
twiztedzuki Join Date: May 2008 Location: Waverly ohio Posts: 586	my single seater has tracker motor and it took alot of bleeding air out out system. once I got air out it stays 180. filler neck maybe 10" higher than top motor

01-04-2011, 05:50 PM	#12
humpy Join Date: Sep 2008 Posts: 573	maybe twistedzuki is onto somethin rogi....raise that dude up higher that i had it....maybe thats the problem..