adjusting propane mixture

mckeddie · 10-19-2011, 10:54 PM

How do I go about adjusting the mixture on my Propane setup?I think its running rich. Im going through 20 lbs. In just 2hours of run time on a 22r with no real obstacles to speak of, just putting around main trail mostly. I want to try leaning it out. Its a gotpropane set up id that matters.

I know nothing about Propane.

Hope Springs Hauler · 10-19-2011, 11:38 PM

http://www.propane.tx.gov/commercial...mpcosystem.pdf

This link talks you through the main steps.

The main mixture valve should have markings that say R and L (Rich, Lean). Adjust as necessary.

Don't go to lean though. I was a bit lean one run and the exhaust got so hot that it turned a red cherry bomb half brown

Pretty much all of the gotpropane stuff is impco brand

10-19-2011, 10:54 PM	#1
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	adjusting propane mixture How do I go about adjusting the mixture on my Propane setup?I think its running rich. Im going through 20 lbs. In just 2hours of run time on a 22r with no real obstacles to speak of, just putting around main trail mostly. I want to try leaning it out. Its a gotpropane set up id that matters. I know nothing about Propane. __________________ zuk buggy.....it'll be a jeep eventually.

10-19-2011, 11:38 PM	#2
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	http://www.propane.tx.gov/commercial...mpcosystem.pdf This link talks you through the main steps. The main mixture valve should have markings that say R and L (Rich, Lean). Adjust as necessary. Don't go to lean though. I was a bit lean one run and the exhaust got so hot that it turned a red cherry bomb half brown Pretty much all of the gotpropane stuff is impco brand __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode