12-17-2011, 01:48 PM
|
#1 |
Join Date: Feb 2008
Location: middletown,oh
Posts: 508
|
Dana 44s?
I have a set on a samurai and they need brakes but I don't know what they came off of. They aren't full size truck width, are 5 on 5.5, passenger side front and center rear.
|
|
|
|
12-17-2011, 02:29 PM
|
#2 |
Join Date: Jul 2011
Location: Southern Ohio
Posts: 55
|
Scout or wagoneer probably
|
|
|
|
|
12-21-2011, 10:04 AM
|
#3 | |
|
Join Date: Feb 2011
Posts: 29
|
Quote:
|
|
|
|
|
|
12-21-2011, 04:10 PM
|
#4 |
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
44
I have this set up in my jeep, 78 scout is what I tell them at the parts store. If it has 8 bolts holding the spindle on its scout knuckles, if it has 6 bolts then it is possibly jeep knuckles with 30 outers. That's how I set mine up, the stub shaft of a scout 44 will go through the 30 spindle
Last edited by cmartin; 12-22-2011 at 01:26 AM. Reason: forgot part of post |
|
|
|
|
12-21-2011, 10:13 PM
|
#5 |
Join Date: Apr 2007
Location: van wert oh
Posts: 583
|
Post a pic the outer knuckle
__________________
zuk buggy.....it'll be a jeep eventually. |
|
|
|
|
01-07-2012, 01:32 AM
|
#6 |
|
Join Date: Feb 2007
Location: Dayton, Oh
Posts: 23
|
I would say those are probably Scouts as well. That's what I had under my CJ7
__________________
I wasnt Born I Was Fabricated.. 
|
|
|
|
|
01-25-2012, 01:10 PM
|
#7 |
Join Date: Jan 2007
Location: Dry Ridge, KY
Posts: 40
|
Could be scout center with Gm/Jeep knuckles and f150 hubs for the 5 on 5.5 pattern. Look at the steering arm, scout has a double hole with a long arm on the right. If they are standard knuckles then its most likely 79 ford f150 4x4 brakes.
__________________
There are no stupid questions, but the world is full of inquisitive idiots. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
