12-20-2011, 08:21 PM
|
#1 |
|
White ranger guy
Join Date: Nov 2007
Location: Red river gorge,ky
Posts: 274
|
Ford front 60 and chevy 14 bolt built
The front is a Ford drivers drop high pinion ball joint dana 60 with new 5.13
gears and a new detroit locker. It has all new ball joints and rotors and needs one caliper. They have surface rust from sitting outside. The brake lines and hoses are all new as well. It has brand new USA chrome moly 35 spline axles inner and outer and the unit bearings have been redrilled for 8x6.5 pattern with a spare unit bearing. It won't have u-joints or lock outs. It has one high steer arm, and dom tubing between the knuckles with new tie rod ends. It has coil over mounts and link mounts and is set up for 3 link front with a panard bar. The rear is a 14 bolt with 5.13 gears and I was told some type of locker. The ring gear has been shaved but the housing has not. It has new disc brakes, rotors, calipers, hoses, lines. It has 1/2" plate truss, coilover brackets, and lower link brackets for 4 link, as well as leaf spring perches. It also has a nice pinion guard tied into the truss. I need $2K for the pair.
__________________
91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character 
|
|
|
|
12-21-2011, 11:49 PM
|
#2 |
Join Date: Mar 2008
Posts: 188
|
i will trade you a set of 4:56's for your 5:13's and you keep the lockers. i will even come up and do all the labor.
__________________
95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!! |
|
|
|
|
01-08-2012, 06:38 AM
|
#3 |
|
White ranger guy
Join Date: Nov 2007
Location: Red river gorge,ky
Posts: 274
|
Bump
__________________
91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character
|
|
|
|
|
02-04-2012, 01:49 PM
|
#4 |
|
White ranger guy
Join Date: Nov 2007
Location: Red river gorge,ky
Posts: 274
|
If anyones building, I still have these. You can't build them for anywhere close to this.
__________________
91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character
|
|
|
|
|
02-08-2012, 07:54 PM
|
#5 |
|
Join Date: Aug 2011
Posts: 13
|
Would you be willing to seperate? I just need the 60.
|
|
|
|
|
02-09-2012, 12:07 AM
|
#6 |
|
White ranger guy
Join Date: Nov 2007
Location: Red river gorge,ky
Posts: 274
|
Sale is pending. I want them to go as a pair, but if something changes, I will let you know.
__________________
91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character
|
|
|
|
|
02-15-2012, 06:07 PM
|
#7 |
|
The Rox Box
Join Date: Nov 2011
Posts: 4
|
Do you still have them or did they sell.. Thanks
|
|
|
|
|
02-15-2012, 08:44 PM
|
#8 |
|
White ranger guy
Join Date: Nov 2007
Location: Red river gorge,ky
Posts: 274
|
They are supposed to be picked up tomorrow night, at this point..
__________________
91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character
|
|
|
|
|
02-17-2012, 07:00 AM
|
#9 |
|
White ranger guy
Join Date: Nov 2007
Location: Red river gorge,ky
Posts: 274
|
sold
Sold
__________________
91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
